Seismic radiation from dynamic coalescence, and the reconstruction of dynamic source parameters on a planar fault

The dynamic coalescence of two mode II cracks on a planar fault is simulated here using the elastodynamic boundary integral equation method. We focus on the complexity of the resultant slip rate and seismic radiation in the crack coalescence model (CCM) and on the reconstruction of a single crack model (SCM) that can reproduce the CCM waveforms from heterogeneous source parameters rather than coalescence. Simulation results reveal that localized higher slip rates are generated by coalescence as a result of stress interaction between the approaching crack tips. The synthesized seismic radiation exhibits a distinct coalescence phase that has striking similarities to stopping phases in the radiation and propagation properties. The corresponding SCM yields a singular increase in the stress drop distribution, which is accompanied by a sudden decrease in it across the point of coalescence in the CCM. This implies that the generation of high-frequency radiation is more efficient from coalescence than from stopping, although both phenomena exhibit the same strong  ω⁻²  -type displacement spectra.     

Scoria cone formation through a violent Strombolian eruption: Irao Volcano, SW Japan

Scoria cones are common volcanic features and are thought to most commonly develop through the deposition of ballistics produced by gentle Strombolian eruptions and the outward sliding of talus. However, some historic scoria cones have been observed to form with phases of more energetic violent Strombolian eruptions (e.g., the 1943–1952 eruption of Parícutin, central Mexico; the 1975 eruption of Tolbachik, Kamchatka), maintaining volcanic plumes several kilometers in height, sometimes simultaneous with active effusive lava flows. Geologic evidence shows that violent Strombolian eruptions during cone formation may be more common than is generally perceived, and therefore it is important to obtain additional insights about such eruptions to better assess volcanic hazards. We studied Irao Volcano, the largest basaltic monogenetic volcano in the Abu Monogenetic Volcano Group, SW Japan. The geologic features of this volcano are consistent with a violent Strombolian eruption, including voluminous ash and fine lapilli beds (on order of 10^?1 km³ DRE) with simultaneous scoria cone formation and lava effusion from the base of the cone. The characteristics of the volcanic products suggest that the rate of magma ascent decreased gradually throughout the eruption and that less explosive Strombolian eruptions increased in frequency during the later stages of activity. During the eruption sequence, the chemical composition of the magma became more differentiated. A new K–Ar age determination for phlogopite crystallized within basalt dates the formation of Irao Volcano at 0.4?±?0.05 Ma.     

Re-Suspension Technique for Improving Organic Rich Sediment-Water Quality in a Shallow Sea Area

The re-suspension method consists of (1) dispersion of the sediment by air-water jets, (2) pumping of the suspension (small particles and organic matter), (3) settlement in a tank, (4) filtration and (5) disposal of solids (followed by incineration in this case). The pilot test was performed to clean up an area of 3000 m². The dispersed depth of the bottom was approximately 50 cm. The time spent for the work was two weeks. The amount of re-suspended solid removed from the bottom was about 8 tonnes in dry mass. Since the solids contain high concentrations of chemical oxygen demand (COD), total phosphorous (T-P), total nitrogen (T-N) and sulfides, the remaining sediment was considerably improved. Quantitative analyses showed that the full-scale implementation would enable the removal of about 10% of the re-suspended solids, and reduce COD by 95%, T-P by 50%, T-N by 100% and sulfide by 75% for re-deposited sediments in comparison to the original sediments.     

Customary Management System of Irrigation Ponds in Japan-a Case Study in a Globally Important Agricultural Heritage Systems (GIAHS) Site of Noto Island,Ishikawa Prefecture

Recent research has showed increasing interest at the vital role of irrigation ponds that plays at biodiversity conservation, and provides ecological functions at a wide range. However, many irrigation ponds were abolished due to the economic and societal transformation in the rural. In particular, small-scale ponds were abolished and rebuilt to other public uses based on the consensus building process among the community. At the same time, civil organizations also launched initiatives to conserve irrigation ponds for its ecological significance or landscape scenery. However, study pertinent to the small scale ponds in the rural setting is largely neglected. This research aims at revealing the current situation of the utilization and management of small irrigation ponds using a case study of Noto Island in Ishikawa Prefecture. It was found that irrigation ponds are still under the traditional co-management of rural community. The most important finding in this study is that the traditional management of pond water use largely contributes to mitigate the harvest loss from natural disasters such as drought in the face of extreme climate. However, irrigation ponds are facing the threat of degradation due to the sharp decrease of farm population and the existing large number of part time farmers. Therefore, the small scale irrigation ponds and pertinent management and water use allotment should be revalued for its functions at a wide range from the biological and ecological functions and human knowledge system to mitigate disaster threats.     

Japan’s Nation-Wide Electronic Geotechnical Database Systems by Japanese Geotechnical Society

On October 15, 2010, the Japanese Geotechnical Society (JGS) announced the public release of ‘Nation-wide Electronic Geotechnical Database Systems,’ which provides geotechnical information to the public on the internet. The information the system provides is a collection of ground models at 250 m by 250 m in plan built by using data from various geotechnical information databases. The paper first describes historical development of the geotechnical information databases in Japan, and introduces a 5-year project, ‘Integrated Geophysical and Geological Information Database in Japan,’ led by the National Research Institute for Earth Science and Disaster Prevention (NIED), and participated by the JGS. The paper then presents the JGS’ ‘Nation-wide Electronic Geotechnical Database Systems,’ and describes why such system was proposed and built, followed by the presentation of the examples for possible application of the system.     

Three-Dimensional Subsurface Structure Model of Kansai International Airport by Integration of Borehole Data and Seismic Profiles

The three-dimensional subsurface structure model around Kansai International Airport (KIX) has been developed based on the geologically and geotechnically investigated results of a large amount of borehole data for estimation of subsidence. The model consists of the alternation of marine clay and coarse deposits. The many seismic surveys and borehole drillings were carried out around the KIX before the constructing the airport. The stratigraphy of the model was renewed by the KIX18-1, which was about 1,300 m long drilling core and was drilled near the 2nd runway of the KIX from 2006 to 2007. In this study, the subsurface geological model was revised by integration of renewed borehole data and seismic profiles to incorporate complex warping structure and heterogenic lateral variation.     

Opening and closing process of the Paleo-Tethys in Northern Thailand

The Paleo-Tethys formed a large ocean basin that existed between Laurasia and Gondwana during Late Paleozoic to Early Mesozoic times. It opened in the Early Devonian by the rifting of Gondwanaland and closed at around latest Triassic time by the collision of the Cimmerian continent to Laurasia (Metcalfe, 1999). We reconstructed opening and closing process of the Paleo-Tethys in Northern Thailand.     

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.     

Polymetallic Mineralization at the Suttsu Vein-type Deposit, Southwestern Hokkaido, Japan

Abstract. The Suttsu polymetallic vein-type deposit, hosted by tuff, tuff breccia and shale of the Miocene Kunnui Formation and propylitized hornblende-augite andesite, is located in southwestern Hokkaido, Japan. It has been exploited and explored for Cu, Pb, Zn and Ag until 1962.
In this study, we examined K-Ar ages, ore mineralogical characteristics and fluid inclusions to obtain new data for the deposit.
The K-Ar ages on sericite indicate that the polymetallic mineralization occurred in Late Miocene (8.1–5.7 Ma). The polymetallic banded ore from the Ohkubo vein is characterized by an abundance of Au, Ag, Sn, Bi, in, Se and Te. These metals are mainly ascribed to electrum (30.3–37.8 atom% Ag), Se-bearing pavonite (8.5–9.5 wt% Se), gustavite-lillianite solid solution, Se-bearing bismuthinite (5.0–5.3 wt% Se), kawazulite, cassiterite, Sn-bearing chalcopyrite (3.3–4.2 wt% Sn), In-bearing stannite, stannite-chalcopyrite solid solution, and In- and Sn-bearing sphalerite (2.6–8.4 wt% In and 1.8–4.3 wt% Sn), occurring in narrow bands of the ore. The In- and Sn-bearing sphalerite likely forms a sphalerite-roquesite-stannite solid solution with the contents of roquesite and stannite being about 2–9 and 2-A mole%, respectively. Temperatures and salinities (in wt% NaCl equiv.) of the ore fluids are estimated to be 180-250C and 3–4 wt%, respectively. The Sn-bearing chalcopyrite therefore probably precipitated metastably. The geologic and mineralogical features suggest that pre-Tertiary basement rocks rich in organic material underlie the Miocene Kunnui Formation nearby the deposit and that they contributed to local and temporary reduction of magnetite-series magmas favorable for the early stage tin-polymetallic mineralization.