Shaking table tests on seismic response of steel braced frames with column uplift

Previous studies have suggested that rocking vibration accompanied by uplift motion might reduce the seismic damage to buildings subjected to severe earthquake motions. This paper reports on the use of shaking table tests and numerical analyses to evaluate and compare the seismic response of base‐plate‐yielding rocking systems with columns allowed to uplift with that of fixed‐base systems. The study is performed using half‐scale three‐storey, 1 × 2 bay braced steel frames with a total height of 5.3 m. Base plates that yield due to column tension were installed at the base of each column. Two types of base plates with different thicknesses are investigated. The earthquake ground motion used for the tests and analyses is the record of the 1940 El Centro NS component with the time scale shortened by a factor of 1/√2. The maximum input acceleration is scaled to examine the structural response at various earthquake intensities. The column base shears in the rocking frames with column uplift are reduced by up to 52% as compared to the fixed‐base frames. Conversely, the maximum roof displacements of the fixed and rocking frames are about the same. It is also noted that the effect of the vertical impact on the column associated with touchdown of the base plate is small because the difference in tensile and compressive forces is primarily due to the self‐limiting tensile force in the column caused by yielding of the base plate. Copyright © 2006 John Wiley & Sons, Ltd.     

Timescales and mechanisms of fluid infiltration in a marble: an ion microprobe study

Using a recently developed ion microprobe technique, a detailed oxygen isotope map of calcite grains in a coarse-grained marble has been constructed, supported by trace element (Mn, Sr, Fe) analysis and cathodoluminescence (CL) imaging, in order to constrain scales of oxygen isotope equilibrium, timescales and mechanisms of metamorphic fluid infiltration, and fluid sources and pathways. Results are compared with a previous study of this sample (Wada 1988) carried out using a cryo-microtome technique and conventional oxygen isotope analysis. The marble, from the high temperature/low pressure Hida metamorphic belt in north-central Japan, underwent granulite facies followed by amphibolite facies metamorphic events, the latter associated with regional granite intrusion. The CL imaging indicates two types of calcite, a yellow luminescing (YLC) and a purple luminescing (PLC) variety. The YLC, which occupies grain boundaries, fractures, replacement patches, and most of the abundant deformation twin lamellae, post-dates the dominant PLC calcite and maps out fluid pathways. Systematic relationships were established between oxygen isotope and trace element composition, calcite type and texture, based on 74 ¹⁸O/¹⁶O and 17 trace element analyses with 20–30 μ m spatial resolution. The YLC is enriched in Mn and Fe, and depleted in ¹⁸O and Sr compared to PLC, and is much more ¹⁸O depleted than is indicated from conventional analyses. Results are interpreted to indicate infiltration of ¹⁸O-depleted (metamorphic or magmatic) fluid (initial δ¹⁸O = 9‰–10.5‰) along grain boundaries, fractures and deformation twin lamellae, depleting calcite grains in Sr and enriching them in Mn and Fe. The sample is characterised by gross isotopic and elemental disequilibrium, with important implications for the application of chromatographic theory to constrain fluid fluxes in metacarbonate rocks. Areas of PLC unaffected by “short-circuiting” fluid pathways contain oxygen diffusion profiles of ∼10‰/∼200 μm in grain boundary regions or adjacent to fractures/patches. When correction is made for estimated grain boundary/fracture and profile orientation in 3D, profiles are indistinguishable within error. Modelling of these profiles gives consistent estimates of Dt (where D is the diffusion coefficient and t is time) of ∼0.8 × 10⁻⁸ m², from which, using experimental data for oxygen diffusion in calcite, timescales of fluid transport along grain boundaries at amphibolite facies temperatures of ∼10³ to ∼10⁴ years are obtained. These short timescales, which are much shorter than plausible durations of metamorphism, imply that rock permeabilities may be transiently much higher during fluid flow than those calculated from time integrated fluid fluxes or predicted from laboratory measurements. The preservation of ¹⁸O/¹⁶O profiles requires either rapid cooling rates (∼100–600 °C/million years), or, more plausibly, loss of grain boundary fluid such that a dry cooling history followed the transient passage of fluid. The δ¹⁸O/trace element correlations are also consistent with volume diffusion-controlled transport in the PLC. Fluid transport and element exchange occurred by two inter-related mechanisms on short timescales and on different lengthscales – long-distance flow along cracks, grain boundaries and twin lamellae coupled to ∼200 μm-scale volume diffusion of oxygen. Received: 8 December 1997 / Accepted: 18 May 1998     

Geochemical behaviour of iron and manganese ions in the Ningyo-Toge uranium deposit district, southwest Japan

The Ningyo-Toge uranium deposit is one of the typical sedimentary uranium deposits in Japan. In general, during weathering, U is removed from the basal granite through underground water. The underground water in this area is rich in U, and has a comparatively high concentration of Fe and Mn.

In this area, three types of Fe minerals can be recognized in different modes of occurrence: (1) in the oxide zone brownish Fe-hydroxide mineral with ferric ion, i.e. goethite (-FeOOH); (2) in the reduced zone of the mine gallery pale-blue Fe-hydroxide mineral with some ferrous ion, i.e. lepidocrocite (γ-FeOOH); and (3) Fe-sulphate minerals such as melanterite (FeSO₄·7H₂O), etc. Some uranyl sulphate minerals, uranopilite and zippeite, are closely associated with these Fe-sulphate minerals. Under weakly alkaline conditions of the oxidizing environment, Mn-hydroxide (MnOOH) coexists with goethite as alternative thin laminae with shale, or coprecipitates resembling a marine Mn nodule, in the size of 0.5 cm in diameter. Radioactive anomalies have been recognized frequently for these Mn sediments due to absorption of Ra by the sediments.     

Carbon and Oxygen Isotopic Compositions of Carbonates from Precambrian Apatite-Bearing Carbonate Rocks of the Aldan Shield

Geostructural setting, as well as mineral and isotopic compositions, of separate apatite deposits and occurrences in the Aldan Shield composed of Precambrian metasedimentary apatite–carbonate rocks are considered. In terms of carbon and oxygen isotopic compositions, they differ from other carbonate rocks of the Aldan Shield, including carbonatites and Ca–Mg metasomatites, and resemble Phanerozoic and Precambrian metasedimentary carbonates. They formed in oxidizing conditions. The contribution of evaporite processes at different stages of their formation is supported by the carbonate enrichment in ¹³C and the presence of sulfates. It was established that apatite–carbonate rocks represent the product of complex alternation of sedimentary processes at different values of salinity in the basins occasionally characterized by the decomposition of older sediments under subaerial conditions.     

Fast practical evaluation of soil–structure interaction of embedded structures

A simple and fast evaluation method of soil–structure interaction (SSI) effects of embedded structures is presented via a cone model. The impedances and the effective input motions at the bottom of an embedded foundation are evaluated by means of the cone model. Those quantities are transformed exactly to the corresponding values at the top of the foundation. The evaluated quantities are combined with the super-structure at the top of the foundation. The transfer function amplitude of the interstory drift of a single-degree-of-freedom super-structure is computed for various cases, i.e. no SSI, SSI without embedment, SSI with shallow embedment, SSI with deep embedment. Soil properties are also varied to investigate in more detail the SSI effects of embedded structures. It is found that, while the transfer function amplitude is reduced by the increase of embedment in general, the characteristics of the transfer function amplitude for a very small ground shear wave velocity and large embedment are irregular and complicated.     

Nonlinear surface ground analysis via statistical approach

A statistical approach is proposed for nonlinear surface ground analysis. In contrast to the conventional method which deals with only a single ground motion for equivalent linearization of soil properties, a design response spectrum defined at the upper level (bottom of the surface ground) of an engineering bedrock can be handled as the target design earthquake in the present paper. The effective shear strain in each soil layer is evaluated by means of a statistical procedure in which the mean peak shear strain is computed in terms of its standard deviation and the corresponding peak factor. The stiffness and damping ratio of each soil layer are obtained iteratively from the nonlinear relation of stiffness reduction factors and damping ratios with respect to the strain level. After the evaluation of the equivalent stiffness and damping ratio of every soil layer, the ground surface response spectrum is transformed from the design response spectrum defined at the upper level of the engineering bedrock via the one-dimensional wave propagation theory. The reliability and accuracy of the proposed analysis method is examined through the comparison with the results by the conventional method (represented by the program) for many simulated spectrum-compatible ground motions.     

Sea-floor fissures, biological communities and sediment fatty acids of the Northern Okushiri Ridge, Japan Sea: Implications for possible methane seepage

A biological community was discovered in the Northern Okushiri Ridge, northeastern Japan Sea. The community was closely associated with sea-floor fissures, and presumed to be supported by methanotrophic and/or thiotrophic bacterial production. Sediments inside of and in the vicinity of the fissures were collected, and the short-chain (C_9–20) sediment fatty acids were analyzed for amounts and compositions. The fatty acid compositions were compared with those from a known methane seep and a submarine volcano in the Sagami Bay, central Japan, and from a whale skeleton at the Torishima Seamount, northwestern Pacific Ocean. As a result, a close relationship between the sediments from the Northern Okushiri Ridge, the known methane-seep, and the whale skeleton was found. This finding represents the first discovery of methane seepage and associated biological communities in the Japan Sea. This also supports the hypothesis that the eastern margin of the northern Japan Sea is at the early stage of new subduction.     

Characteristic of the vertical seismic waves associated with the 1995 Hyogo‐ken Nanbu (Kobe), Japan earthquake estimated from the failure of the Daikai Underground Station

The dynamic behaviour of underground structures built by cut‐and‐cover methods is discussed. A simple model analysis shows that a column supporting the overburden at midspan (central column) can resonate upon incidence of an elastic wave of a specific frequency. The analytical results indicate that not only the size and material properties of the column, but also the static load acting on the column (overburden) is a decisive factor that influences the resonant frequency. Based on the results obtained by the analysis, the mechanism of the failure at the Daikai Underground Station in Kobe caused by the 1995 Hyogo‐ken Nanbu, Japan, earthquake is investigated. It is shown that the wave‐induced damage to underground structures can concentrate on the sections with specific overburden, and from the induced damage, it is possible to estimate the frequency characteristics of the associated seismic waves. Copyright © 2000 John Wiley & Sons, Ltd.     

Effects of alkali and alkaline-earth cations on the high-pressure sound velocities of aluminosilicate glasses

Physics and Chemistry of Minerals - A black tourmaline sample from Seagull batholith (Yukon Territory, Canada) was established to be a schorl with concentrations of Fe2+ among the highest currently...     

Production of the Blood Pressure Lowing Peptides from Brown Alga （ Undaria pinnatifida ）

Brown alga （ Undaria pinnatifida） was treated with alginate lyase and hydrolyzed using 17 kinds of proteases and the inhibitory activity of the hydrolysates for the angiotensin-I-converting enzyme （ACE） was measured. Four hydrolysates with potent ACE-inhibitory activity were administered singly and orally to spontaneously hypertensive rats （SHRs）. The systolic blood pressure of SHRs decreases significantly after single oral administration of the brown alga hydrolysates by pro- tease S ＇ Amano＇ （from Bacillus stearothermophilus） at the concentration of 10 （mg protein） （kg body weight）^ - 1. In the 17 weeks of feeding experiment, 7-week-old SHRs were fed standard diet supplemented with the brown alga hydrolysates for 10 weeks. In SHRs fed 1.0 and 0.1% brown alga hydrolysates, elevating of systolic bloodpressure was significantly suppressed for 7 weeks. To elucidate the active components, the brown alga hydrolysates were fractionated by 1-butanol extraction and HPLC on a reverse-phase column. Seven kinds of ACE-inhibitory peptides were isolated and identified by amino acid composition analysis, sequence analysis, and LC-MS with the results Val-Tyr, Ile-Tyr, Ala-Trp, Phe-Tyr, Val-Trp, Ile-Trp, and Leu-Trp. Each peptide was determined to have an antihypertensive effect after a single oral administration in SHRs. The brown alga hydrolysates were also confirmed to decrease the blood pressure in humans.