Acoustic properties of deformed rocks in the Nobeoka thrust,in the Shimanto Belt,Kyushu, Southwest Japan

Laboratory measurements for compressional and shear wave velocities (Vp and Vs, respectively) and porosity were conducted with core samples from the Nobeoka Thrust Drilling Project (NOBELL) under controlled effective pressure (5–65 MPa at 5 MPa intervals) and wet conditions. Samples were classified according to deformation texture as phyllite, foliated cataclasite, or non‐foliated cataclasite. Measured values of Vp, Vs, and porosity are within a range of 5.17–5.57 km/s, 2.60–2.71 km/s, and 2.75–3.10 %, respectively, for phyllite; 4.89–5.23 km/s, 2.46–2.57 km/s, and 3.58–4.53 %, respectively, for foliated cataclasite; and 4.90–5.32 km/s, 2.51–2.63 km/s, and 3.79–4.60 %, respectively, for non‐foliated cataclasite, which are all consistent with the previous laboratory experiments conducted with outcrop samples under dry conditions. However, our results also indicate higher Vp and Vs and lower porosity than those measured by the previous studies that adopted the wire‐line logging methods. The variations in Vp, Vs, and porosity are controlled by deformation structure and are greater for phyllite and foliated cataclasite than for non‐foliated cataclasite.     

Gold-bearing Quartz Veins and Hydrothermal Alteration of the Paleozoic Epithermal System in the Francis Creek Area, North Queensland, Australia

Abstract. The Francis Creek area located at the Sybil graben in North Queensland, Australia, has some features of epithermal gold mineralization such as gold-bearing quartz vein and silica body hosted in rhyodacitic rocks of the Late Carboniferous Hells Gate Formation. In order to understand the nature of the paleo-hydrothermal activity in this area and to aid exploration for an economic gold deposit in this area, we carried out hydrothermal alteration mapping surrounding the veins and silica body, over an area of about 7 times 5 km².
We defined two alteration zones and inferred the center of hydrothermal activity. Fluid inclusion shows the boiling feature, and the microthermometry analysis resulted in the trapping temperature of 240°C and low salinity. This temperature is consistent with the formation temperature of clay mineral in the host rocks. On the basis of whole-rock composition, the silica body was identified as silicified rocks. Precious metal minerals such as electrum and acanthite coexist with sulfide minerals. Iodagylite was identified as a product of weathering. The sulfide minerals imply that the low-sulfidation epithermal gold mineralization occurred in the Francis Creek area.     

Textural evidence for recent co-seismic circulation of fluids in the Nojima fault zone, Awaji island, Japan

The Hirabayashi borehole (Awaji Island, Japan) was drilled by the Geological Survey of Japan (GSJ) 1 year after the Hyogo-ken Nanbu (Kobe) earthquake (1995, M_JMA=7.2). This has enabled scientists to study the complete sequence of deformation across the active Nojima fault, from undeformed granodiorite to the fault core. In the fault core, different types of gouge and fractures have been observed and can be interpreted in terms of a complex history of faulting and fluid circulation. Above the fault core and within the hanging wall, compacted cataclasites and gouge are cut by fractures which show high apparent porosity and are filled by 5–50 μm euhedral and zoned siderite and ankerite crystals. These carbonate-filled fractures have been observed within a 5.5-m-wide zone above the fault, but are especially abundant in the vicinity (1 m) of the fault. The log-normal crystal size distributions of the siderite and ankerite suggest that they originated by decaying-rate nucleation accompanied by surface-controlled growth in a fluid saturated with respect to these carbonates. These carbonate-filled fractures are interpreted as the result of co-seismic hydraulic fracturing and upward circulation of fluids in the hanging wall of the fault, with the fast nucleation of carbonates attributed to a sudden fluid or CO₂ partial pressure drop due to fracturing. The fractures cut almost all visible structures at a thin section scale, although in some places, the original idiomorphic shape of carbonates is modified by a pressure-solution mechanism or the carbonate-filled fractures are cut and brecciated by very thin gouge zones; these features are attributed to low and high strain-rate mechanisms, respectively. The composition of the present-day groundwater is at near equilibrium or slightly oversaturated with respect to the siderite, calcite, dolomite and rhodochrosite. Taken together, this suggests that these fractures formed very late in the evolution of the fault zone, and may be induced by co-seismic hydraulic fracturing and circulation of a fluid with a similar composition to the present-day groundwater. They are therefore potentially related to recent earthquake activity (<1.2 Ma) on the Nojima fault.     

An experimental study on impact-induced alterations of planetary organic simulants

The present study systematically investigates shock-induced alteration of organic simulants of planetary bodies (OSPBs) as a function of peak shock pressure and temperature by impact experiments. Our results show that the composition and structure of OSPBs are unchanged upon impacts at peak pressures ≤~5 GPa and temperatures ≤~350 °C. On the other hand, these are dramatically changed upon impacts at >7–8 GPa and > ~400 °C, through loss of hydrogen-related bonds and concurrent carbonization, regardless of the initial compositions of OSPBs. Compared with previous results on static heating of organic matter, we suggest that shock-induced alteration cannot be distinguished from static heating only by Raman and infrared spectroscopy. Our experimental results would provide a proxy indicator for assessing degree of shock-induced alteration of organic matter contained in carbonaceous chondrites. We suggest that a remote-sensing signature of the 3.3–3.6 μm absorption due to hydrogen-related bonds on the surface of small bodies would be a promising indicator for the presence of less-thermally-altered (i.e., <350 °C) organic matter there, which will be a target for landing to collect primordial samples in sample-return spacecraft missions, such as Hayabusa2 and OSIRIS-REx.     

Geochemical and mineralogical characteristics of ion-adsorption type REE mineralization in Phuket, Thailand

Geochemical and mineralogical studies were conducted on the 12-m-thick weathering profile of the Kata Beach granite in Phuket, Thailand, in order to reveal the transport and adsorption of rare earth elements (REE) related to the ion-adsorption type mineralization. The parent rock is ilmenite-series biotite granite with transitional characteristics from I type to S type, abundant in REE (592 ppm). REE are contained dominantly in fluorocarbonate as well as in allanite, titanite, apatite, and zircon. The chondrite-normalized REE pattern of the parent granite indicates enrichment of LREE relative to HREE and no significant Ce anomaly. The upper part of the weathering profile from the surface to 4.5 m depth is mostly characterized by positive Ce anomaly, showing lower REE contents ranging from 174 to 548 ppm and lower percentages of adsorbed REE from 34% to 68% compared with the parent granite. In contrast, the lower part of the profile from 4.5 to 12 m depth is characterized by negative Ce anomaly, showing higher REE contents ranging from 578 to 1,084 ppm and higher percentages from 53% to 85%. The negative Ce anomaly and enrichment of REE in the lower part of the profile suggest that acidic soil water in an oxidizing condition in the upper part mostly immobilized Ce⁴⁺ as CeO₂ and transported REE³⁺ downward to the lower part of the profile. The transported REE³⁺ were adsorbed onto weathering products or distributed to secondary minerals such as rhabdophane. The immobilization of REE results from the increase of pH due to the contact with higher pH groundwater. Since the majority of REE in the weathered granite are present in the ion-adsorption fraction with negative Ce anomaly, the percentages of adsorbed REE are positively correlated with the whole-rock negative Ce anomaly. The result of this study suggests that the ion-adsorption type REE mineralization is identified by the occurrence of easily soluble REE fluorocarbonate and whole-rock negative Ce anomaly of weathered granite. Although fractionation of REE in weathered granite is controlled by the occurrence of REE-bearing minerals and adsorption by weathering products, the ion-adsorption fraction tends to be enriched in LREE relative to weathered granite.     

Characteristics and Mineralization Age of the Fukusen No. 1 Vein,Hishikari Epithermal Gold Deposits,Southern Kyushu,Japan

The Fukusen No. 1 vein is located in the southeastern part of the Yamada deposit, Hishikari epithermal gold deposits, southern Kyushu, Japan. ⁴⁰Ar/³⁹Ar plateau ages of adularia from the margin and the center of the Fukusen vein are determined to be 0.617 ± 0.024 Ma and 0.606 ± 0.009 Ma, respectively. The Fukusen No. 1 vein shows banding structure composed mainly of quartz, adularia and clay minerals. Colloform texture is displayed by cryptocrystalline to amorphous silica material that is associated with fine-grained electrum and sulfides near the center of the vein. Pyrite in the Fukusen No. 1 vein often shows acicular shape resulting from inversion from marcasite. Near the center of the vein, primary marcasite occurs associated with colloform texture of silica. The Fukusen No.1 vein preserves primary texture and materials which were deposited from the ore-forming hydrothermal solution. The Fukusen No. 1 vein was formed in a short period and is one of the youngest veins in the Hishikari deposits.     

Radiolarian Age of Manganese Ore and Red Chert from the Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. We obtain radiolarian fossils such as Follicucullus monacanthus, Pseudoalbaillella aff. globosa, Pseudoalbaillella cf fusiformis , and Pseudoalbaillella spp. belonging to the Pseudoalbaillella globosa and Follicucullus monacanthus Zones from manganese ore and associated red chert of the Ananai stratiform manganese deposit in the Northern Chichibu Belt, central Shikoku. The depositional age of the Ananai ore deposit is constrained as Guadalupian (Middle Permian) that is between 270.6 and 260.4 Ma in the updated geologic time scale.     

Origin of felsic volcanism in the Izu arc intra-arc rift

An intra-arc rift (IAR) is developed behind the volcanic front in the Izu arc, Japan. Bimodal volcanism, represented by basalt and rhyolite lavas and hydrothermal activity, is active in the IAR. The constituent minerals in the rhyolite lavas are mainly plagioclase and quartz, whereas mafic minerals are rare and are mainly orthopyroxene without any hydrous minerals such as amphibole and biotite. Both the phenocryst and groundmass minerals have felsic affinities with a narrow compositional range. The petrological and bulk chemical characteristics are similar to those of melts from some partial melting experiments that also yield dry rhyolite melts. The hydrous mineral-free narrow mineral compositions and low-Al₂O₃ affinities of the IAR rhyolites are produced from basaltic middle crust under anhydrous low-temperature melting conditions. The IAR basalt lavas display prominent across-arc variation, with depleted elemental compositions in the volcanic front side and enriched compositions in the rear-arc side. The across-arc variation reflects gradual change in the slab-derived components, as demonstrated by decreasing Ba/Zr and Th/Zr values to the rear-arc side. Rhyolite lavas exhibit different across-arc variations in either the fluid-mobile elements or the immobile elements, such as Nb/Zr, La/Yb, and chondrite-normalized rare earth element patterns, reflecting that the felsic magmas had different source. The preexisting arc crust formed during an earlier stage of arc evolution, most probably during the Oligocene prior to spreading of the Shikoku back-arc basin. The lack of systematic across-arc variation in the IAR rhyolites and their dry/shallow crustal melting origin combines to suggest re-melting of preexisting Oligocene middle crust by heat from the young basaltic magmatism.     

Cenozoic Island Arc Magmatism in Java Island (Sunda Arc, Indonesia): Clues on Relationships between Geodynamics of Volcanic Centers and Ore Mineralization

Abstract. Java island, regarded as a classic example of island arcs, is built through multi events of Cenozoic arc magmatism produced by the subduction of Indian‐Australian oceanic crusts along the southern margin of Eurasian plate. Regional crustal compositions, subducted slabs, and tectonics determined the spatial‐geochemical evolution of arc magmatism and regional metallogeny. Tertiary geodynamics of island arc was dominated by backarc‐ward migrations of volcanic centers. Only after the Miocene‐Pliocene roll‐back effects of retreating slab, slab detachment, and backarc magmatism took place in central Java. The source of arc magmas is mainly partial melting of mantle wedge, triggered by fluids released from dehydrated slabs. Increasing potassium contents of arc magmas towards the backarc‐side and younger magmas is typical for all magmas, while alkali and incompatible trace elements ratios are characteristics for different settings of volcanic centers. The oceanic nature of crust and the likely presence of hot slab subducted beneath the eastern Java determine the occurrences of adakitic magmas. Backarc magmatism has a deeper mantle source with or without contributions from subduction‐related materials. The domination of magnetite‐series magmatism determines the sulfide mineralization for the whole island. District geology, geodynamics, and magma compositions in turn control particular styles and scales of precious metals concentrations. Deep‐seated crustal faults have focused the locations of overlapping volcanic centers and metalliferous fluids into few major gold districts. Porphyry deposits are mostly concentrated within Lower Tertiary (early stage) volcanic centers in eastern Java which are not covered by younger volcanic centers, and whose sulfides are derived from partial melting of basaltic parental materials. On the other hand, high‐grade low‐sulfidation epithermal gold deposits formed in later stages of arc development and are spatially located within younger volcanic centers (Upper Miocene‐Pliocene) that overlap the older ones. Gold in low‐sulfidation epithermal system is likely to be derived from crustal materials. The overall interacting factors resulting in the petrochemical systematics that are applicable for exploration: 1) early‐stage volcanic centers with high Sr/Y and Na₂O/K₂O ratios are more prospective for porphyry mineralization, while 2) later‐stage volcanic centers with high K₂O, total alkali, and K₂O/Na₂O ratios are more prospective for low‐sulfidation epithermal mineralization.     

Gold Content in Siliceous Deposits Formed from Acidic and Iron-rich Geothermal Waters at Hatchobaru, Central Kyushu, Japan

Abstract: The gold content in siliceous deposits formed from geothermal waters at the Hatchobaru geothermal power station in central Kyushu, Japan, was determined by inductively coupled plasma quadrupole mass spectrometry (ICP–MS). It ranges from 1.3 to 4.6 mg/kg. The highest gold content was obtained from the siliceous deposit formed from acidic waters. In this siliceous deposit, hydrous iron(III) oxide of amorphous state is a major constituent, suggesting that hydrous iron(III) oxide might play an important role when gold is concentrated into siliceous deposits formed from acidic and iron-rich geothermal waters.