It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

Sorption-desorption kinetics and toxic cell concentration in marine phytoplankton microalgae exposed to Linear Alkylbenzene Sulfonate

Linear Alkylbenzene Sulfonates (LAS) are ubiquitous surfactants. Traces can be found in coastal environments. Sorption and toxicity of C₁₂-LAS congeners were studied in controlled conditions (2-3500 μg C₁₂LAS/L) in five marine phytoplanktonic species, using standardized methods. IC₅₀ values ranged from 0.5 to 2 mg LAS/L. Sorption of ¹⁴C₁₂-6 LAS isomer was measured at environmentally relevant trace levels (4 μg/L) using liquid scintillation counting. Steady-state sorption on algae was reached within 5 h in the order dinoflagellate > diatoms > green algae. The sorption data, fitted a L-type Freundlich isotherm, indicating saturation. Desorption was rapid but a low LAS fraction was still sorbed after 24 h. Toxic cell concentration was 0.38 ± 0.09 mg/g for the studied species. LAS toxicity results from sorption on biological membranes leading to non-specific disturbance of algal growth. Results indicate that LAS concentrations in coastal environments do not represent a risk for these organisms.     

Polybrominated diphenyl ethers and polychlorinated biphenyls in sediments of southwest Taiwan: regional characteristics and potential sources

Very little information is available on the contamination of coastal sediments of Taiwan by PBDEs and PCBs. In this study, we determined the concentrations of 19 PBDE and 209 PCB congeners in 57 surface sediment samples to identify the possible sources of PBDEs and PCBs. The total PBDE and PCB concentrations ranged from below detection limit to 7.73 ng/g and 0.88-7.13 ng/g, respectively; these values are within the ranges observed for most coastal sediments worldwide. The PBDE congeners were dominated by BDE-209 (50.7-99.7%), with minor contributions from penta- and octa-BDEs. The signatures of PCB congeners suggested that PCB residues in Kaohsiung coast may be the legacy of past use or the result of ongoing inputs from the maintenance, repair and salvage of old ships. Principal component analysis of the congener-specific composition of PBDEs and PCBs revealed distinct regional patterns that are related to the use of commercial products.     

A Multi‐Element Ion‐Pair Extraction for Trace Metals Determination in Environmental Samples

A multi‐element ion‐pair extraction method was described for the preconcentration of Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) ions in environmental samples prior to their determinations by flame atomic absorption spectrometry (FAAS). As an ion‐pair ligand 2‐(4‐methoxybenzoyl)‐N′‐benzylidene‐3‐(4‐methoxyphenyl)‐3‐oxo‐N‐phenyl‐propono hydrazide (MBMP) was used. Some analytical parameters such as pH of sample solution, amount of MBMP, shaking time, sample volume, and type of counter ion were investigated to establish optimum experimental conditions. No interferences due to major components and some metal ions of the samples were observed. The detection limits of the proposed method were found in the range of 0.33–0.9 µg L^?1 for the analyte ions. Recoveries were found to be higher than 95% and the relative standard deviation (RSD) was less than 4%. The accuracy of the procedure was estimated by analyzing the two certified reference materials, LGC6019 river water and RTC‐CRM044 soil. The developed method was applied to several matrices such as water, hair, and food samples.     

Long-term and transient time variation of cosmic ray fluxes detected in Argentina by CARPET cosmic ray detector

We present results obtained at El Leoncito (CASLEO, San Juan, Argentina) with the CARPET charged particles detector installed in April 2006. The observed modulation of the cosmic ray flux is discussed as a function of its time variability and it is related to longer solar activity variations and to shorter variations during solar and geomagnetic transient activity. Short period (few minutes, few hours) cosmic ray modulation events are observed during rain time (precipitation) and significant variations of the atmospheric electric field. Complementary observations of the atmospheric electric field indicate that its time variations play an important role in the detected cosmic ray event.     

Sampling strategy and climatic implications of tree-ring stable isotopes on the southeast Tibetan Plateau

We explore the potential of tree-ring cellulose δ¹⁸O and δ¹³C records for reconstructing climate variability in the southeast Tibetan Plateau. Our sampling strategy was designed to investigate intra and inter-tree variability, and the effects of the age of tree on δ¹⁸O variation. We show that intra-tree δ¹³C and δ¹⁸O variability is negligible, and inter-tree coherence is sufficient to build robust tree-ring δ¹⁸O or δ¹³C chronologies based on only four trees. There is no evidence of an age effect regarding δ¹⁸O, in contrast with tree-ring width. In our warm and moist sampling site, young tree δ¹³C is not clearly correlated with monthly mean meteorological data. Tree-ring δ¹⁸O appears significantly anti-correlated with summer precipitation amount, regional cloud cover, and relative humidity. Simulations conducted with the ORCHIDEE land surface model confirm the observed contribution of relative humidity to tree cellulose δ¹⁸O, and explain the weak correlation of δ¹³C with climate by the non-linear integration linked with photosynthesis. Altogether, the tree-ring cellulose δ¹⁸O is shown to be a promising proxy to reconstruct regional summer moisture variability prior to the instrumental period.     

Mathesia darderi (Astre) (Bivalvia, Hippuritoidea, Monopleuridae): Morphological, biogeographical and ecological changes in the Mediterranean domain during the late Barremian-Albian

Mathesia darderi, a slender cylindrical monopleurid genus, formerly documented from the late Aptian-Albian of Spain, France, Tunisia, Algeria, Egypt and Turkey, has been discovered in the upper Barremian and the lower Aptian of Bulgaria and Spain. Notwithstanding some morphological changes, Barremian-lower Aptian forms and those of the upper Aptian-Albian possess the same myocardinal organisation and the same microstructural attributes. The inner shell margin of the right valve displays scalloped, festooned, tubular and vermiform microstructures. The most prominent evolutionary trait of M. darderi is the increase in body size through time. A statistical analysis of size distributions show that populations of the late Barremian-early Aptian, and the late Aptian, and those of the early to middle Albian, are significantly different; a pattern which has a biostratigraphic potential. Ecological changes through time are expressed by a displacement of communities from the central/distal part, to the proximal part of carbonate platforms. M. darderi is present locally in the upper Barremian-lower Aptian, and has its major spreading over the European and Arabo-African margins of the Mediterranean Tethys during the Clansayesian-lower to middle Albian. The disappearance of the species at the Middle-Upper Albian boundary, correlates with a critical, spatial reduction of carbonate platforms.     

Recognizing soft-sediment structures in deformed rocks of orogens

Soft-sediment deformation structures are common on passive continental margins, in trenches at subduction zones, and in strike-slip environments. Rocks from all these tectonic environments are incorporated into orogens, where soft-sediment deformation structures should be common. However, recognizing soft-sediment structures is difficult where superimposed tectonic structures are present. In seeking characteristic features of soft-sediment deformation, it is important to separate questions that relate to physical state (lithified or unlithified) from those that address the overall kinematic style (rooted or gravity driven). One recognizable physical state is liquefaction, which produces sand that has much lower strength than interbedded mud. Hence structures which indicate that mud was stronger than adjacent sand at the time of deformation can be used as indicators of soft-sediment deformation. These include angular fragments of mud surrounded by sand, dykes of sand cutting mud, and most usefully, folded sandstone layers displaying class 3 geometry interbedded with mud layers that show class 1 geometry. All these geometries have the potential to survive overprinting by later superimposed tectonic deformation; when preserved in deformed sedimentary rocks at low metamorphic grade they are indicators of liquefaction of unlithified sediment during deformation.     

IFKIS-Hydro: an early warning and information system for floods and debris flows

IFKIS-Hydro is an information and warning system for hydrological hazards in small- and medium-scale catchments. The system collects data such as weather forecasts, precipitation measurements, water level gauges, discharge simulations and local observations of event-specific phenomena. In addition, IFKIS-Hydro incorporates a web-based information platform, which serves as a central hub for the submission and overview of data. Special emphasis is given to local information. This is accomplished particularly by human observers. In medium-scale catchments, discharge forecast models have an increasing importance in providing valuable information. IFKIS-Hydro was developed in several test regions in Switzerland and the first results of its application are available now. The system is constantly extended to additional regions and may become the standard for warning systems in smaller catchments in Switzerland.     

A case study of the internal structures of gossans and weathering processes in the Iberian Pyrite Belt using magnetic fabrics and paleomagnetic dating

In the Rio Tinto district of the Iberian Pryrite Belt of South Spain, the weathering of massive sulfide bodies form iron caps, i.e., true gossans and their subsequent alteration and re-sedimentation has resulted in iron terraces, i.e., displaced gossans. To study the stucture and evolution of both types of gossans, magnetic investigations have been carried out with two foci: (1) the characterisation and spatial distribution of magnetic fabrics in different mineralised settings, including massive sulfides, gossans, and terraces, and (2) paleomagnetic dating. Hematite has been identified as the suceptibility carrier in all sites and magnetic fabric investigation of four gossans reveals a vertical variation from top to bottom, with: (1) a horizontal foliation refered to as “mature” fabric in the uppermost part of the primary gossans, (2) highly inclined or vertical foliation interpreted as “immature” fabric between the uppermost and lowermost parts, and (3) a vertical foliation interpreted to be inherited from Hercynian deformation in the lowermost part of the profiles. In terraces, a horizontal foliation dominates and is interpreted to be a “sedimentary” fabric. Rock magnetic studies of gossan samples have identified goethite as the magnetic remanence carrier for the low-temperature component, showing either a single direction close to the present Earth field (PEF) direction or random directions. Maghemite, hematite, and occasionally magnetite are the remanence carriers for the stable high-temperature component that is characterized by non PEF directions with both normal and reversed magnetic polarities. No reliable conclusion can be yet be drawn on the timing of terrace magnetization due to the small number of samples. In gossans, the polarity is reversed in the upper part and normal in the lower part. This vertical distribution with a negative reversal test suggests remanence formation during two distinct periods. Remanence in the upper parts of the gossans is older than in the lower parts, indicating that the alteration proceeded from top to bottom of the profiles. In the upper part, the older age and the horizontal “mature” fabric is interpreted to be a high maturation stage of massive sulfides’ alteration. In the lower part, the age is younger and the inherited “imature” vertical Hercynian fabric indicates a weak maturation stage. These two distinct periods may reflect changes of paleoclimate, erosion, and/or tectonic motion.