Characterization of sediments in an abandoned mining area; a case study of Mansfeld region,Germany

The distribution of selected heavy metals, including some radionuclides, metalloids and non-metals was determined in stream sediments in a region influenced by abandoned copper mining and ore processing activities. A considerable amount of the ore processing waste with a very complex composition and highly elevated concentrations of zinc, sulfur, lead, copper, arsenic, and a lot of other elements in the range between 100 and 1,000 mg/kg (Sb, Mn, Ni, Cr, Cd, Hg, and Ag) was piled up on mine dumps. The dispersion of the pollutants originating from this source and their environmental impact were investigated. Both, sediments and original waste material were studied to indicate the pathways and the mobilization behavior of different pollutants. For this purpose, the process of the elution of pollutants by application of different fractionation schemes was studied. The capabilities of different analytical techniques are shown for the analysis of solid samples (X-ray fluorescence spectrometry, Gamma-spectrometry) and liquid ones (ICP-atomic emission spectrometry, ICP-mass spectrometry and different techniques of atomic absorption). Additionally, the coupling of ion chromatography and ICP-MS detection was used to study the distribution of arsenic species in the sediment cores of a lake which acts as a natural sink for the region.     

Neoproterozoic to Early-Palaeozoic magmatic evolution in the Gondwana-derived Austroalpine basement to the south of the Tauern Window (Eastern Alps)

In the Austroalpine Basement to the south of the Tauern Window, distinct suites of metabasites occur with orthogneisses in pre-Early-Ordovician units. Tholeiitic and alkaline within-plate basalt-type metabasites are associated with acid meta-porphyroids in the post-Early-Ordovician Thurntaler Phyllite Group. According to their correlated trace element abundances, metabasite zircons crystallized with their host rocks. Protolith Pb–Pb zircon ages, whole-rock Ta/Yb–Th/Yb and oxygen, Sr, Nd isotope data define two principal evolution lines. An older evolution at elevated Th/Yb typical of subduction-related magmatism, started by 590-Ma N-MORB-type and 550–530 Ma volcanic arc basalt type basic suites, which mainly involved depleted mantle sources. It finished with mainly crustal-source 470–450-Ma acid magmatites. An other evolution line by tholeiitic and 430-Ma alkaline within-plate basalt-type suites in both pre- and post-Early-Ordovician units is characterized by an intraplate mantle metasomatism and enrichment trend along multicomponent sources. These magmatic evolution lines can be related to a plate tectonic scenario that involved terranes in a progressively mature Neoproterozoic to Ordovician active margin, and a subsequent Palaeo-Tethys passive margin along the north Gondwanan periphery.     

A mechanism of mineral replacement: isotope tracing in the model system KCl-KBr-H2O

The solid solution-aqueous solution system KCl-KBr-H₂O is used as a model system to determine the mechanism of the replacement process of one crystalline phase by another. A single crystal of KBr was allowed to react with a saturated KCl solution enriched in ⁴⁰K and the resulting new product phases were analyzed for changes in both anion and K isotope composition, using SEM, EDX, microprobe analysis, mass spectrometry and X-ray diffraction. The results show that the new product, K(Cl,Br), contains elements derived from both the original fluid and solid phases, indicating that both anions and K isotopes are exchanged during the replacement reaction. The interface between the advancing reaction front and the original parent crystal is sharp on a micron scale, showing no reaction profile that could indicate a solid state diffusion mechanism. Macroscopically the new phase is turbid due to the development of porosity that is consistent with a net volume deficit replacement reaction and this porosity may act as an indication that a replacement process has taken place. Single crystal X-ray diffraction patterns show the preservation of the crystallographic orientation during the replacement process. The replacement mechanism is interpreted as a result of a coupled process of dissolution and recrystallization occurring at the fluid-crystal interface.     

Trace element incorporation into quartz: A combined study by ICP-MS, electron spin resonance, cathodoluminescence, capillary ion analysis, and gas chromatography

Pegmatite quartz from different occurrences in Norway and Namibia was investigated by a combination of ICP-MS, Electron Spin Resonance (ESR), Capillary Ion Analysis (CIA) and Gas Chromatography (GC) to quantify trace elements in very low concentrations and to determine their position in the quartz structure.The studied quartz samples show similar geochemical characteristics with low contents of most trace elements. Remarkable are the elevated concentrations of Al (36-636 ppm), Ti (1.6-25.2 ppm), Ge (1.0-7.1 ppm), Na (5.2 to >50 ppm), K (1.6 to >100 ppm) and Li (2.1-165.6 ppm). These elements are preferentially incorporated into the quartz lattice on substitutional (Al, Ti, Ge) and interstitial (Li, Na, K) positions. Li⁺ was found to be the main charge compensating ion for Al, Ge and Ti, whereas some ppm of Na and K may also be hosted by fluid inclusions. Ti may be incorporated as substitutional ion for Si or bound on mineral microinclusions (rutile). The results of the ESR measurements show that there may be a redistribution of alkali ions during irradiation. The diamagnetic [AlO₄/M⁺]⁰ center transforms into the paramagnetic [AlO₄]⁰ center, whilst the compensating ions diffuse away and may be captured by the diamagnetic precursor centers of [GeO₄]⁰ and [TiO₄]⁰ to form paramagnetic centers ([TiO₄/Li⁺]⁰, [GeO₄/Li⁺]⁰).In general, fluid inclusions in pegmatite quartz can be classified as H₂O-CO₂-NaCl type inclusions with water as the predominant volatile. Among the main elements hosted by fluid inclusions in quartz are Na, K, NH₄, Ca, Mg and the anionic complexes Cl⁻, NO₃⁻, HCO₃⁻ and SO₄²⁻. Gas analysis of trapped fluids shows volatile components in the following order of abundance: H₂O > CO₂ > N₂(+) ≥ CH₄ > COS > C₂ and C₃ hydrocarbons. Additionally, traces of Co, Ni, Zn, Pb, and Cu were detected by CIA in fluid inclusions of some samples. There are indications that the REE and Rb are also bound in fluid inclusions, however, the concentrations of these elements are too low to be measured by CIA. Assuming that the REE preferentially occur in fluid inclusions, the typical chondrite normalized REE distribution patterns with tetrad effects and a distinct negative Eu anomaly would reflect the composition of the mineralizing fluid.For a number of elements, especially those with extremely low concentrations, the “type” of incorporation in quartz could not directly be determined. We conclude that these ions either are too large to substitute for the small Si⁴⁺ ion or they are not soluble in the mineralizing fluids to be hosted by fluid inclusions. Some of these elements, which are concentrated in the specific mineralization of certain pegmatites, are not present in elevated concentrations in the paragenetic pegmatite quartz itself. This was observed, for instance, for Be, Cs and Rb in the Li (Be-Cs-Rb) pegmatites of Rubicon or for Nb and Ta for Nb-Ta bearing pegmatites from Norway. It may be concluded that the concentrations of these trace elements in quartz do not reflect the mineralization and that these elements thus, cannot be used as petrogenetic indicator.     

Multi-Element Isotope Dilution Sector Field ICP-MS: A Precise Technique for the Analysis of Geological Materials and its Application to Geological Reference Materials

We present a multi-element technique for the simultaneous determination of twelve trace elements in geological materials by combined isotope dilution (ID) sector field inductively coupled plasma-mass spectrometry (SF-ICP-MS) following simple sample digestion. In addition, the concentrations of fourteen other trace elements have been obtained using the ID determined elements as internal standards. This method combines the advantages of ID (high precision and accuracy) with those of SF-ICP-MS (multi-element capability, fast sample processing without element separation) and overcomes the most prevailing drawbacks of ICP-MS (matrix effects and drift in sensitivity). Trace element concentration data for BHVO-1 (n = 5) reproduced to within 1–3% RSD with an accuracy of 1–2% relative to respective literature values for ID values and 2–3% for all other values. We have applied this technique to the analysis of seventeen geological reference materials from the USGS, GSJ and IAG. The sample set also included the new USGS reference glasses BCR-2G, BHVO-2G and BIR-1G, as well as the MPI-DING reference glasses KL2-G and ML3B-G, and NIST SRM 612. Most data agreed within 3–4% with respective literature data. The concentration data for the USGS reference glasses agreed in most cases with respective data of the original rock powder within the combined standard uncertainty of the method (2–3%), except the U concentration of BIR-1G, which showed a three times higher concentration compared to BIR-1.     

The Mesozoic–Cenozoic structural framework of the Bay of Kiel area, western Baltic Sea

A dense grid of multichannel high-resolution seismic sections from the Bay of Kiel in the western Baltic Sea has been interpreted in order to reveal the Mesozoic and Cenozoic geological evolution of the northern part of the North German Basin. The overall geological evolution of the study area can be separated into four distinct periods. During the Triassic and the Early Jurassic, E–W extension and the deposition of clastic sediments initiated the movement of the underlying Zechstein evaporites. The deposition ceased during the Middle Jurassic, when the entire area was uplifted as a result of the Mid North Sea Doming. The uplift resulted in a pronounced erosion of Upper Triassic and Lower Jurassic strata. This event is marked by a clear angular unconformity on all the seismic sections. The region remained an area of non-deposition until the end of the Early Cretaceous, when the sedimentation resumed in the area. Throughout the Late Cretaceous the sedimentation took place under tectonic quiescence. Reactivated salt movement is observed at the Cretaceous Cenozoic transition as a result of the change from an extensional to compressional regional stress field. The vertical salt movement influenced the Cenozoic sedimentation and resulted in thin-skinned faulting.     

Remote Sensing Methods to Investigate Boundary-layer Structures relevant to Air Pollution in Cities

Simultaneous surface-based remote sensing with optical (Ceilometer) and acoustic (Sodar) methods allows the diurnal variation of the structure of the atmospheric boundary layer to be deduced with high temporal resolution. Primarily the convective boundary layer, the nocturnal stable surface layer, and the residual layer can be identified from the measured vertical profiles of aerosol concentration and thermal fluctuations. The ability of the two remote sensing techniques is shown in different examples from two different locations and two seasons. The impact on urban air quality assessment is addressed.     

Greenhouse Gas Dynamics of an Increased Use of Wood in Buildings in Switzerland

Long-living wood products contribute to the mitigation of climate change in many ways. They act as a carbon pool during their service life, as they withdraw CO₂ from its natural cycle. After their service life, they can stitute for fossil fuels if they are incinerated in adequate furnaces. Furthermore, wood products can stitute for more energy-intense products made of ‘conventional’ materials. This paper quantifies the stitution and pool effects of an increased use of wood in the building sector in Switzerland for the years 2000–2130. Life cycle data on greenhouse gas (GHG) emissions of 12 wood products and their stitutes are used as proxies for relevant building products; this data is linked to the forecasted wood flows for each group of building products in a cohort-model. For the political assessment, GHG effects occurring abroad and in Switzerland are distinguished. The results show that the pool effect of an increased use of long-living wood products is of minor importance, whereas the energetic and material stitution effects are much more relevant, especially on a long-term. For construction products, the Swiss share of the GHG effect related to the material stitution is relatively high, as mainly nationally produced materials are stituted for. For interior products, the Swiss share of the GHG effect related to the material stitution is rather small because mainly imports are stituted for. The results must be considered as rough estimates. Nonetheless, these calculations show that an increased use of wood in the building sector is a valid and valuable option for the mitigation of greenhouse gas emissions and for reaching GHG emission targets in a mid- to long-term. Still, the pool and stitution capacity of an increased use of wood is relatively small compared to the overall GHG emissions of Switzerland.     

Perception and evaluation of dead wood in streams and rivers by German students

Dead wood is a significant element of natural streams and rivers in temperate climate zones. Established stream management removes wood, whereas some scientists recently promoted the reintroduction of wood in stream rehabilitation and restoration. It is desirable to know if wood in streams and rivers would be accepted. A survey was therefore conducted in order to assess the spontaneous visual perception of 10 stream and 10 river scenes with and without wood in terms of naturalness, risk, aesthetics and need for improvement using visual analog scales. Three hundred and sixty-five German students from five subjects related to water management and from one subject without any professional association to running waters were surveyed before their first contact to teaching of aquatic ecology. They clearly perceived wood in streams and rivers as natural. Scenes with wood were most frequently associated with danger for sport activities while scenes without wood were most frequently associated with danger by flooding. When comparing scenes with and without wood, scenes with wood were clearly considered more positive as significantly more aesthetic, less dangerous and needing less improvement. The disciplinary groups showed variations in the absolute evaluation scores but the relative evaluation of scenes with wood versus scenes without wood was similar among all groups. The results indicate an acceptance for the reintroduction of wood in stream rehabilitation and restoration by young students who are potential future players in water management.