Hydrogeochemical prospecting for porphyry copper deposits in the tropical-marine climate of Puerto Rico

A hydrogeochemical survey utilizing waters from streams and springs was conducted in the area of two known porphyry copper deposits in the tropical-marine climate of westcentral Puerto Rico. The most important pathfinder for regional hydrogeochemical surveys is sulfate which reflects the associated pyrite mineralization. Because of increased mobility due to intense chemical weathering and the low pH environment, dissolved copper can also be used as a pathfinder for regional surveys and has the advantage of distinguishing barren pyrite from pyrite associated with copper mineralization. For follow-up surveys, the most important pathfinders are copper, sulfate, pH, zinc, and fluoride. High concentrations of dissolved copper and moderate concentrations of sulfate is a diagnostic indication of nearby sources of copper minerals.An understanding of the geochemical processes taking place in the streambeds and the weathering environment, such as the precipitation of secondary copper minerals, contributes to the interpretation of the geochemical data and the selection of the most favorable areas for further exploration.     

Mineralogy and petrology of the Abee enstatite chondrite breccia and its dark inclusions

The Abee E4 enstatite chondrite breccia consists of clasts (many rimmed by metallic Fe, Ni), dark inclusions and matrix. The clasts and matrix were well equilibrated by thermal metamorphism, as evidenced by uniform mineral compositions, recrystallized chondrules, low MnO content of enstatite and high abundance of orthoenstatite. The clasts acquired their metal-rich rims prior to this metamorphic episode. The occurrence in Abee of relatively unmetamorphosed dark inclusions, clasts with nearly random magnetic orientations and a matrix with a uniform magnetic orientation [18,19] indicates that clast and matrix metamorphism occurred prior to the agglomeration of the breccia.The dark inclusions are an unusual kind of enstatite chondritic material, distinguished from the clasts and matrix by their relative enrichments in REE [21–23], low relative abundances of kamacite, total metallic Fe, Ni and silica, lower niningerite/(total sulfide) ratios, high relative abundances of oldhamite and martensite, smaller euhedral enstatite, more heterogeneous enstatite and metallic Fe, Ni, more calcic enstatite and more nickeliferous schreibersite.We propose the following model for the petrogenesis of the Abee breccia: The maximum metamorphic temperature of breccia parent material was?- 840°C (the minimum temperature of formation of Abee niningerite) and perhaps near 950–1000°C (the Fe-Ni-S eutectic temperature). Euhedral enstatite crystals in metallic Fe, Ni- and sulfide-rich areas grew at these metamorphic temperatures into pliable metal and sulfide. Breccia parent material was impact-excavated from depth, admixed with dark inclusions and rapidly cooled (700 to 200°C in about 2 hours) [15]. During this cooling, clast and matrix material acquired thermal remanent magnetization. Random conglomeration of clasts and unconsolidated matrix materials caused the clasts to have random magnetic orientations and the matrix areas to have net magnetic intensities of zero (due to the cancellation of numerous randomly oriented magnetic vectors of equal intensity in the matrix). A subsequent ambient magnetic field imparted a uniform net magnetic orientation to the matrix and caused the magnetic orientations of the clasts to be somewhat less random. The Abee breccia was later consolidated, possibly by shock or by shallow burial and very long-period/low-temperature (< 215°C) metamorphism.     

Spectra of the earthquake sequence February-March, 1981, in south-central Sweden

On February 13, 1981 a relatively strong earthquake occurred in the Lake Vänern region in south-central Sweden. The shock had a magnitude ofM_L = 3.3 and was followed within three weeks by three aftershocks, with magnitudes 0.5 ≤ M_L ≤ 1.0. The focal mechanism solution of the main shock indicates reverse faulting with a strike in the N-S or NE-SW direction and a nearly horizontal compressional stress. The aftershocks were too small to yield data for a full mechanism solution, but first motions of P-waves, recorded at two stations, are consistent for the aftershocks. Dynamic source parameters, derived from Pg- and Sg-wave spectra, show similar stress drops for the main shock (2 bar) and the aftershocks (1 bar), while the differences in seismic moment (1.5·10²⁰ resp. 4·10¹⁸dyne cm), fault length (0.7 resp. 0.2 km) and relative displacement (0.15 resp. 0.03 cm) are significant.     

A statistical method to evaluate homogeneity of structural populations

For any specific rock unit in a discontinuous rock mass, the determination of structural domain boundaries is important because geologic and hydrologic properties vary from one domain to another. A domain can be considered as a structural population characterized by a distinct pattern of structure orientations (i.e., fracture, bedding, or foliation orientations).Boundaries are usually determined by comparing samples of structural data, each of which consists of a Schmidt plot that commonly displays at least 150 poles to fractures. When fracture orientations appear dispersed and random on the plots, visual comparisons are not sufficient to determine whether the samples were obtained from the same structural domain. An appropriate x ² test has been adapted to this situation and is capable of evaluating the homogeneity of structural populations. The method uses a contingency table analysis based on the frequencies of fracture poles that occur in corresponding patches on the Schmidt plots being compared.     

The coalification pattern in the Northern Apennines and its palaeogeothermic and tectonic significance

The rocks of the Northern Apennines predominantly consist of non-metamorphic terrigeneous deposits (flysches and molasses) some of which are preorogenic, some synorogenic and others postorogenic with respect to the nappe tectonics (Miocene). As plant fragments frequently occur in these sediments, a study of coal rank based on reflectance measurements on vitrinites (% Rm = mean value of the random reflectance in non polarized light) contributes to the clarification of the relation between the orogenic and the palaeogeothermal development. The determination of the Rm values of more than 180 samples from outcrops and three deep drillings revealed some important features. Within the pile of Liguride and Tuscanide nappes, the coal rank increases from the uppermost nappe to the lower nappes until lowgrade metamorphism is reached in the Lower Tuscanides. In the single nappes the rank decreases from the Tyrrhenian coast (internal zone) towards the Po Plain (external zone). This regional trend is disturbed only locally by young post-coalification tectonics. In the uppermost Liguride nappe (M. Antola Unit) a pre-Oligocene (i. e. pre-Apenninic) thermal event was detected. Postorogenic heating is connected with the magmatic activity of Late Miocene to Pleistocene age in Tuscany. Except for these preorogenic and postorogenic thermal events, the main coalification is generally younger than the emplacement of the nappes in the nappe pile during the Apenninic orogeny in the Miocene, but it is older than the last thrust movements and the final tensional tectonics in the internal zones of the chain. For these reasons, the main regional thermal event has to be considered as synorogenic or, more precisely, as late-synorogenic.     

Geochemistry of the Sweetwater Wash Pluton,California: Implications for “anomalous” trace element behavior during differentiation of felsic magmas

Field relations, mineralogy and major and trace element data for the very felsic, peraluminous Sweetwater Wash pluton establish a differentiation sequence dominantly controlled by fractional crystallization processes. Elements Ba and Sr show depletion by factors of 50–60X from the earliest granite unit analyzed to the late-stage pegmatites and aplites. The strong Ba depletion is largely due to the partitioning behavior of this element in K-feldspar, while the Sr depletion is due to the combined effects of the two feldspars. The 4-fold increase in Rb during crystallization is also predictable from mineral/ melt partition coefficients.Coefficients for the light rare-earth elements (LREE) in major mineral species predict that these elements should behave incompatibly during crystallization and increase with fractionation. In fact, the LREE abundances decrease by a factor of 10–20X during crystallization. This anomalous behavior is commonly observed in felsic plutonic and volcanic sequences. In the Sweetwater Wash pluton monazite occurs in minute quantities, but it is sufficiently abundant to govern the partitioning of LREE and Th during crystallization. Petrographic observations indicate that monazite was on the liquidus throughout most of the crystallization. Analyses of silicate mineral separates suggest that the monazite contains more than 75% of the LREE in the whole rocks.Fractionation of REE-rich accessories (in particular monazite) from felsic magmas may be the general cause of REE depletion during differentiation of these melts. Monazite can easily be mistaken for zircon and, because it typically contains 50% LREE, extremely minute and easily overlooked quantities of monazite can control LREE abundances.     

Approximation of interfacial properties in multiphase porous medium systems

We investigate the estimation of interfacial areas, curvatures, and common curve lengths in multiphase porous medium systems. Algorithms are developed to obtain estimates of these quantities based upon a variety of potential data sources and estimation approaches. The accuracy of the derived approximations are evaluated as a function of the data type and resolution of the data. The methods advanced improve upon standard approaches now in use and show excellent accuracy at resolutions on the order of five lattice points per minimum radius of curvature of the object being resolved. Finally, we suggest a promising class of extensions that could lead to further improvements in the accuracy of such methods.