A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.     

The fate of terrestrial organic matter in two Scottish sea lochs

Sea lochs are zones of rapid organic matter (OM) turnover. Most of this OM is of allochthonous origin, being introduced into the lochs via freshwater input. In this study the behaviour of terrestrially derived OM was elucidated using a combination of parameters which indicate OM diagenesis in the near surface sediments from two Scottish sea lochs, Loch Creran and Loch Etive. Alkaline CuO oxidation was used to determine lignin phenols which serve as biomarkers for terrestrial OM in sediments. Stable carbon isotope, total carbon and nitrogen and total OM (including the labile and refractory fractions) compositions were also determined.     

Variability and propagation of Labrador Sea Water in the southern subpolar North Atlantic

The variability of two modes of Labrador Sea Water (LSW) (upper and deep Labrador Sea Water) and their respective spreading in the interior North Atlantic Ocean are investigated by means of repeated ship surveys carried out along the zonal WOCE line A2/AR19 located at 43–48°N (1993–2007) and along the GOOS line at about 48–51°N (1997–2002). Hydrographic section data are complemented by temperature, salinity, and velocity time series recorded by two moorings. They have been deployed at the western flank of the Mid-Atlantic Ridge (MAR) in the Newfoundland Basin during 1996–2004. The analysis of hydrographic anomalies at various longitudes points to a gradual eastward propagation of LSW-related signals, which happens on time scales of 3–6 years from the formation region towards the MAR. Interactions of the North Atlantic Current (NAC) with the Deep Western Boundary Current (DWBC) close to Flemish Cap point to the NAC being the main distributor of the different types of LSW into the interior of the Newfoundland Basin. Comparisons between the ship data and the mooring records revealed that the mooring sites are located in a region affected by highly variable flow. The mooring time series demonstrate an elevated level of variability with eddy activity and variability associated with the NAC considerably influencing the LSW signals in this region. Hydrographic data taken from Argo profiles from the vicinity of the mooring sites turned out to mimic quite well the temporal evolution captured by the moorings. There is some indication of occasional southward flow in the LSW layer near the MAR. If this can be considered as a hint to an interior LSW-route, it is at least of minor importance in comparison to the DWBC. It acts as an important supplier for the interior North Atlantic, distributing older and recently formed LSW modes southward along the MAR.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

Variable hangingwall palaeotransport during Silurian and Devonian thrusting in the western Lachlan Fold Belt: Missing gold lodes,synchronous Melbourne Trough sedimentation and Grampians Group fold interference

The western margin of the Lachlan Fold Belt contains early ductile and brittle structures that formed during northeast‐southwest and east‐west compression, followed by reactivation related to sinistral wrenching. At Stawell all of these structural features (and the associated gold lodes) are dismembered by a complex array of later northwest‐, north‐ and northeast‐dipping faults. Detailed underground structural analysis has identified northwest‐trending mid‐Devonian thrusts (Tabberabberan) that post‐date Early Devonian plutonism and have a top‐to‐the‐southwest transport. Deformation associated with the initial stages of dismemberment occurred along an earlier array of faults that trend southwest‐northeast (or east‐west) and dip to the northwest (or north). The initial transport of the units in the hangingwall of these fault structures was top‐to‐the‐southeast. ‘Missing’ gold lodes were discovered beneath the Magdala orebody by reconstructing a displacement history that involved a combination of transport vectors (top‐to‐the‐southeast and top‐to‐the‐southwest). Fold interference structures in the adjacent Silurian Grampians Group provide further evidence for at least two almost orthogonal shortening regimes, post the mid‐Silurian. Overprinting relationships, and correlation with synchronous sedimentation in the Melbourne Trough, indicates that the early fault structures are mid‐ to late‐Silurian in age (Ludlow: ca 420–414 Ma). These atypical southeast‐vergent structures have regional extent and separate significant northeast‐southwest shortening that occurred in the mid‐Devonian (‘Tabberabberan orogeny’) and Late Ordovician (‘Benambran orogeny’).     

Structural and metamorphic evolution of the Moornambool Metamorphic Complex,western Lachlan Fold Belt,southeastern Australia

The wedge‐shaped Moornambool Metamorphic Complex is bounded by the Coongee Fault to the east and the Moyston Fault to the west. This complex was juxtaposed between stable Delamerian crust to the west and the eastward migrating deformation that occurred in the western Lachlan Fold Belt during the Ordovician and Silurian. The complex comprises Cambrian turbidites and mafic volcanics and is subdivided into a lower greenschist eastern zone and a higher grade amphibolite facies western zone, with sub‐greenschist rocks occurring on either side of the complex. The boundary between the two zones is defined by steeply dipping L‐S tectonites of the Mt Ararat ductile high‐strain zone. Deformation reflects marked structural thickening that produced garnet‐bearing amphibolites followed by exhumation via ductile shearing and brittle faulting. Pressure‐temperature estimates on garnet‐bearing amphibolites in the western zone suggest metamorphic pressures of ～0.7–0.8 GPa and temperatures of ～540–590°C. Metamorphic grade variations suggest that between 15 and 20 km of vertical offset occurs across the east‐dipping Moyston Fault. Bounding fault structures show evidence for early ductile deformation followed by later brittle deformation/reactivation. Ductile deformation within the complex is initially marked by early bedding‐parallel cleavages. Later deformation produced tight to isoclinal D₂ folds and steeply dipping ductile high‐strain zones. The S₂ foliation is the dominant fabric in the complex and is shallowly west‐dipping to flat‐lying in the western zone and steeply west‐dipping in the eastern zone. Peak metamorphism is pre‐ to syn‐D₂. Later ductile deformation reoriented the S₂ foliation, produced S₃ crenulation cleavages across both zones and localised S₄ fabrics. The transition to brittle deformation is defined by the development of east‐ and west‐dipping reverse faults that produce a neutral vergence and not the predominant east‐vergent transport observed throughout the rest of the western Lachlan Fold Belt. Later north‐dipping thrusts overprint these fault structures. The majority of fault transport along ductile and brittle structures occurred prior to the intrusion of the Early Devonian Ararat Granodiorite. Late west‐ and east‐dipping faults represent the final stages of major brittle deformation: these are post plutonism.     

A temporal model for landslide risk based on historical precipitation

Of the recognized nonsteady-state factors that influence slope stability, probably most critical in many field situations is the character of precipitation and infiltration activity. A groundwater response model used in conjunction with precipitation records can provide a historical catalog of estimated maximum groundwater levels in a particular study area. An extreme-value statistical analysis of this catalog is linked with geotechnical slope stability analyses to provide a landslide hazard model for estimating the probability of slope failure within a given time. This modeling approach can provide meaningful input to risk assessments for landslide mitigation programs and to decision analyses and cost-benefit studies important for land-use planning and resource management.This paper was presented at Emerging Concepts, MGUS 87 Conference, Redwood City, California, 13–15 April 1987.     

Early Cretaceous uplift and erosion of the northern Appalachian Basin, New York, based on apatite fission track analysis

The thermal history of outcropping Devonian sediments of the northern Appalachian Basin, New York, has been investigated using fission track analysis of detrital apatites from 57 sandstone samples. Based on lengths and apparent age measurements using fission tracks in apatite it is concluded that Lower Devonian sediments presently at the surface in the Catskill region were cooled rapidly from temperatures higher than about 110°C during Early Cretaceous times (120–140 Ma ago). In the western part of New York (Wellsville-Buffalo) data from late Devonian sediments are consistent with cooling at the same time as that identified for the Catskill region but from lower temperatures, in the range of approximately 80–110°C, the maximum temperature these sediments experienced since deposition. For a pre-uplift paleogeothermal gradient of 25–35°C/km, the confined track length data indicates uplift and erosion of 2–3 km for western New York and greater than 3–4 km for the Catskill region, a differential uplift pattern which is consistent with the historical stratigraphic data from the region. This conclusion is at variance with earlier interpretations put forth by others.Rapid broad scale uplift and erosion of the scale identified imply that large volumes of sediment could have been supplied from the northern Appalachian Basin during the Early Cretaceous. This timing for the dominant post-Devonian cooling phase in the basin is not accounted for by recent models of the tectonic evolution of the Appalachian Orogen but is compatible with the change from carbonate to siliciclastic deposition in the Atlantic coastal plain. It is suggested that this style of broad regional uplift without significant deformation is characteristic of a tectonic regime associated with, and subsequent to, continental rifting.Apatite fission track analysis is shown to be a basic tool in providing fundamental limits for thermal history assessment in regional tectonic problems.     

Climate and economic competitiveness: Florida freezes and the global citrus processing industry

Summary Casual observers of the impacts associated with four recent freezes in Florida's citrus producing areas might be inclined to agree with an assessment by Miami Herald reporters that these freezes had caused the king of citrus to be toppled from its throne, enabling Brazil to take its place. Research on the citrus industry, however, reveals that the impacts of these recent freezes only explain part of the story of the interaction between climate variability and the relationship between the citrus industries of Florida and Brazil. Climate characteristics and their variability have directly as well as indirectly affected the economic competitiveness of citrus producers whose output is in large measure climate-dependent. Climate variability has had direct impacts on Florida's citrus industry by adversely affecting the productivity of citrus groves in some areas, by altering growers' perceptions of freeze probabilities and, occasionally, by suddenly reducing output, thus elevating the price that consumers must pay for that commodity. Indirectly, competition can be affected by climate as a potential producer identifies a weakness in the supply system of an existing industry and seeks to fill the gap.Brazil's involvement in the toppling of King Citrus began not in the early 1980s (as a result of the four freezes in the past six years), but in 1962 as a result of a major freeze in that year, one that sharply increased FCOJ prices by reducing Florida's output. It was then that the climate had an impact on the economic competitiveness of the citrus industry. The records document the steady, almost meteoric, rise in Brazilian FCOJ production and exports. Subsequent freezes only served to abet a process that had been well underway two decades before the recent devastating freezes.As for Florida's ability to continue and perhaps expand its key role in the global citrus economy, the recent freezes do not appear to have fatally damaged that. Rather, those freezes have reawakened Florida's citrus producers to the fact that they are involved in a climate-sensitive industry and have reminded them that the potential for freeze-related problems is never far away. That reawakening has sparked interest in developing hardier citrus varieties, more effective freeze protection methods, and better ways to hedge economically against freeze impacts to the industry.The National Center for Atmospheric Research is sponsored by the National Science Foundation.