Erosion of continental margins in the Western Mediterranean due to sea-level stagnancy during the Messinian Salinity Crisis

High-resolution multi-channel seismic data from continental slopes with minor sediment input off southwest Mallorca Island, the Bay of Oran (Algeria) and the Alboran Ridge reveal evidence that the Messinian erosional surface is terraced at an almost constant depth interval between 320 and 380 m below present-day sea level. It is proposed that these several hundred- to 2,000-m-wide terraces were eroded contemporaneously and essentially at the same depth. Present-day differences in these depths result from subsidence or uplift in the individual realms. The terraces are thought to have evolved during one or multiple periods of sea-level stagnancy in the Western Mediterranean Basin. According to several published scenarios, a single or multiple periods of relative sea-level stillstand occurred during the Messinian desiccation event, generally known as the Messinian Salinity Crisis. Some authors suggest that the stagnancy started during the refilling phase of the Mediterranean basins. When the rising sea level reached the height of the Sicily Sill, the water spilled over this swell into the eastern basin. The stagnancy persisted until sea level in the eastern basin caught up with the western Mediterranean water level. Other authors assigned periods of sea-level stagnancy to drawdown phases, when inflowing waters from the Atlantic kept the western sea level constant at the depth of the Sicily Sill. Our findings corroborate all those Messinian sea-level reconstructions, forwarding that a single or multiple sea-level stagnancies at the depth of the Sicily Sill lasted long enough to significantly erode the upper slope. Our data also have implications for the ongoing debate of the palaeo-depth of the Sicily Sill. Since the Mallorcan plateau experienced the least vertical movement, the observed terrace depth of 380 m there is inferred to be close to the Messinian depth of this swell.     

A New Plankton Sampler for Coral Reefs

Abstract. A new self-contained Horizontal Plankton Sampler (HOPLASA) collects near-reef plankton that is not captured by conventional net tows and emergence traps. An electrical motor-propeller assembly inside a large acrylic cylinder drives water past an in-line flowmeter and through a rigidly attached plankton net. When positioned in the coral reef environment this sampling gear filters known quantities of bottom water. Larvae and developmental stages of many invertebrates and some fishes that never migrate to upper water layers but constitute an important fraction of the food chain are captured. Larvae of sponges, corals, and gorgonians, the most important animal reef builders, are obtained live and undamaged and can be cultured in the laboratory for identification after metamorphosis.     

An Unusual Bluegreen Alga Symbiotic with Two New Species of Ulosa (Porifera: Hymeniacidonidae) from Carrie Bow Cay,Belize*

Abstract. Two new species of the sponge genus Ulosa were found living in symbiosis with a chroococcacean cyanophyte (cyanobacterium) in shallow Caribbean coral reefs off Belize (Central America). Ulosa funicularis is a stringy green sponge (styles: 157 × 2.5 μm, mean dimensions); U. arenosa is a thickly encrusting, shaggy, brownish-greenish mottled species with sandy ectosome (styles: 175 × 3.6 μm). The endosymbiotic algae make up 50% of the cellular sponge tissue. The algal cells are light green, spherical, 5–9 μm in diameter, and divide by median constriction. Electron microscopy shows that cell walls are fully developed but that thylakoids are unusual for their inflated sacs, which are in communication with the nucleoplasmic regions. Although the pigment composition is typical for the Cyanophyta, the phycobiliproteins occur in considerably     

The behaviour of dissolved Cd, Co, Zn, and Pb in North Atlantic near-surface waters (30°N/60°W–60°N/2°W)

In September 1993 (M26) and June/July 1996 (M36), a total of 239 surface samples (7 m depth) were collected on two transects across the open Atlantic Ocean (224 samples) and northwest European shelf edge area. We present an overview of the horizontal variability of dissolved Cd, Co, Zn, and Pb in between the northwest and northeast Atlantic Ocean in relation to salinity and the nutrients. Our data show a preferential incorporation of Cd relative to P in the particulate material of the surface ocean when related to previously published parallel measurements on suspended particulate matter from the same cruise. There is a good agreement with results recently estimated from a model by Elderfield and Rickaby (Nature 405 (2000) 305), who predict for the North Atlantic Ocean a best fit for α_Cd/P=[Cd/P]_POM/[Cd/P]_SW of 2.5, whereas the approach of our transect shows a α_Cd/P value of 2.6. The Co concentrations of our transects varied from <5 to 131 pmol kg⁻¹, with the lowest values in the subtropical gyre. There were pronounced elevations in the low-salinity ranges of the northwest Atlantic and towards the European shelf. The Co data are decoupled from the Mn distribution and support the hypothesis of marginal inputs as the dominant source. Zinc varied from a minimum of <0.07 nmol kg⁻¹ to a maximum of 1.2 and 4.8 nmol kg⁻¹ in regions influenced by Labrador shelf or European coastal waters, respectively. In subtropical and northeast Atlantic waters, the average Zn concentration was 0.16 nmol kg⁻¹. Zinc concentrations at nearly three quarters of the stations between 40°N and 60°N were <0.1 nmol kg⁻¹. This suggests that biological factors control Zn concentrations in large areas of the North Atlantic surface waters. The Pb data indicated that significant differences in concentration between the northwest and northeast Atlantic surface waters presently (1996) do not exist for this metal. The transects in 1993 and 1996 exhibited Pb concentrations in the northeast Atlantic surface waters of 30 to 40 pmol kg⁻¹, about a fifth to a quarter of the concentrations observed in 1981. This decline is supported by our particle flux measurements in deep waters of the same region.     

High resolution climate simulations over the Arctic

The regional atmospheric climate model HIRHAM has been applied to the Arctic. Simulations for the whole year 1990 and for an ensemble of winter months (January of 1985-1995) have been performed. The comparison of the simulations with observational data analyses shows that the general spatial patterns are in good agreement with the data, in both the vertical structure and the annual cycle. For an additional validation of the model results, a multivariate classification of large-scale circulation patterns has been applied to the January ensemble model simulations.     

GGR Biennial Review: Reference Materials in Geoanalytical and Environmental Research – Review for 2008 and 2009

This review gives an overview of the literature on reference materials of geochemical and environmental interest for the two-year period 2008–2009. Reference materials play an increasingly important role in all fields of geoanalytical research. This is demonstrated by the large number of publications containing data on reference materials. Although many reference materials exist, there is still a great need for certified samples, so-called delta zero materials for stable isotopic work and homogeneous microanalytical reference materials. This review focuses on six topics: developments of certification processes of reference materials mainly postulated in ISO guidelines and the IAG protocol, new developments of the GeoReM database, investigations of powdered rock reference materials, Chinese reference materials published in Chinese journals, microanalytical reference materials and isotopic reference materials.     

Ejection behavior characteristics in experimental cratering in sandstone targets

Abstract– Within the frame of the MEMIN research unit (Multidisciplinary Experimental and Numerical Impact Research Network), impact experiments on sandstone targets were carried out to systematically study the influence of projectile mass, velocity, and target water saturation on the cratering and ejection processes. The projectiles were accelerated with two‐stage light‐gas guns (Ernst‐Mach‐Institute) onto fine‐grained targets (Seeberger sandstone) with about 23% porosity. Collection of the ejecta on custom‐designed catchers allowed determination of particle shape, size distribution, ejection angle, and microstructures. Mapping of the ejecta imprints on the catcher surface enabled linking of the different patterns to ejection stages observed on high‐speed videos. The increase in projectile mass from 0.067 to 7.1 g correlates with an increase in the total ejected mass; ejecta angles, however, are similar in range for all experiments. The increase in projectile velocity from 2.5 to 5.1 km s^?1 correlates with a total ejecta mass increase as well as in an increase in comminution efficiency, and a widening of the ejecta cone. A higher degree of water saturation of the target yields an increase in total ejecta mass up to 400% with respect to dry targets, higher ejecta velocity, and a steeper cone. These data, in turn, suggest that the reduced impedance contrast between the quartz grains of the target and the pores plays a primary role in the ejecta mass increase, while vaporization of water determines the ejecta behavior concerning ejecta velocity and particle distribution.     

Optimisation of simplified GCMs using circulation indices and maximum entropy production

Two kinds of objective functions for parameter optimisation in simplified general circulation models (SGCMs) are introduced and tested with an SGCM employing linear parameterisations for diabatic heating, surface friction and horizontal diffusion. (a) A set of circulation indices is introduced to characterise the zonal mean primary and secondary circulation and the global energetics. The objective function is then given by the distance between the modelled and a reference (e.g. observed) circulation in a state space spanned by these indices. (b) The global and time mean entropy production and kinetic energy dissipation are introduced as additional objective functions, following the maximum entropy production principle. It is found that both methods lead to optimal parameter values close to the standard configuration of the model, though the method of the second kind is restricted to those model parameters associated with internal processes such as heat and momentum fluxes.     

Seismic inversion through Tabu Search1

Highly non-linear seismic trace inversion problems can be solved efficiently by an implementation of Tabu Search, a meta-heuristic method related to artificial intelligence. The implementation under consideration is a deterministic, global search that combines the advantages ofa local search, giving a quick descent to local misfit minima, with an ability to cross misfit barriers in the model space. Once Tabu Search has found an area of low misfit, it performs an extensive exploration of its deepest points. This property makes it possible to use Tabu Search for a semiquantitative resolution and uncertainty analysis of the inverse problem.