Controls on porphyroblast size along a regional metamorphic field gradient

Garnet-bearing schists from the Waterville Formation of south-central Maine provide an opportunity to examine the factors governing porphyroblast size over a range of metamorphic grade. Three-dimensional sizes and locations for all garnet porphyroblasts were determined for three samples along the metamorphic field gradient spanning lowest garnet through sillimanite grade, using high-resolution X-ray computed tomography. Comparison of crystal size distributions to previous data sets obtained by stereological methods for the same samples reveals significant differences in mode, mean, and shape of the distributions. Quantitative textural analysis shows that the garnets in each rock crystallized in a diffusion-controlled nucleation and growth regime. In contrast to the typical observation of a correlation between porphyroblast size and position along a metamorphic field gradient, porphyroblast size of the lowest-grade specimen is intermediate between the high- and middle-grade specimens’ sizes. Mean porphyroblast size does not correlate with peak temperatures from garnet-biotite Fe-Mg exchange thermometry, nor is post-crystallization annealing (Ostwald Ripening) required to produce the observed textures, as was previously proposed for these rocks. Robust pseudosection calculations fail to reproduce the observed garnet core compositions for two specimens, suggesting that these calc-pelites experienced metasomatism. For each of these two specimens, Monte Carlo calculations suggest potential pre-metasomatism bulk compositions that replicate garnet core compositions. Pseudosection analyses allow the estimation of the critical temperatures for garnet growth: ∼481, ∼477, and ∼485°C for the lowest-garnet-zone, middle-garnet-zone, and sillimanite-zone specimens, respectively. Porphyroblast size appears to be determined in this case by a combination of the heating rate during garnet crystallization, the critical temperature for the garnet-forming reaction and the kinetics of nucleation. Numerical simulations of thermally accelerated, diffusion-controlled nucleation, and growth for the three samples closely match measured crystal size distributions. These observations and simulations suggest that previous hypotheses linking the garnet size primarily to the temperature at the onset of porphyroblast nucleation can only partially explain the observed textures. Also important in determining porphyroblast size are the heating rate and the distribution of favorable nucleation sites.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

SCOPIX – digital processing of X-ray images for the enhancement of sedimentary structures in undisturbed core slabs

X-ray images of sediment core allow recognition of fine-scaled sedimentary structures which traditional epoxy casts or lacquer peels are unable to resolve. The X-ray imaging system SCOPIX has the additional advantage of acquiring high-resolution digital pictures suitable for further analysis by advanced image processing techniques. Because of the frequent presence of both physical and biogenic sedimentary structures in undisturbed sediment cores, two image analysis procedures have been established which simplify the information contained in the images (in term of structures and facies), and allow a quantitative characterization of the observed structures. This form of parametrization of the image structure constitutes an additional source of information for a better interpretation of the physical processes responsible for the generation of the sedimentary structures.     

GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

Uncertainty as the overlap of alternate conditional distributions

An important task in modern geostatistics is the assessment and quantification of resource and reserve uncertainty. This uncertainty is valuable support information for many management decisions. Uncertainty at specific locations and uncertainty in the global resource is of interest. There are many different methods to build models of uncertainty, including Kriging, Cokriging, and Inverse Distance. Each method leads to different results. A method is proposed to combine local uncertainties predicted by different models to obtain a combined measure of uncertainty that combines good features of each alternative. The new estimator is the overlap of alternate conditional distributions.     

Crustal structure of the Rhenish Massif: results of deep seismic reflection lines Dekorp 2-North and 2-North-Q

The reflection seismic line DEKORP 2-N reveals an almost complete cross section through the Rhenohercynian Zone, the most external part of the Variscan orogen in Europe.The northern part of DEKORP 2-N and a NE-directed branch (2-N-Q) reveal the Cretaceous of the Münsterland basin and the underlying folded Palaeozoic rocks. The northward decreasing intensity of folding is depicted in great detail by the highly reflective Late Carboniferous coal-measures and deeper reflections down to the level of the Givetian/Frasnian shallow-water carbonates.In the Devonian and older rocks of the Rhenish Massif, bedding is only represented by relatively weak, short and irregular reflections. These are truncated by stronger, southward dipping reflections, which exhibit the listric curvature and flat/ramp geometry characteristic of faults. In the northern part of the section, the thrusts appear to be blind. From the Ebbe Anticline southwards, prominent reflections can be correlated with important thrust faults known from the surface, such as the Ebbe-, Siegen-, Müsen- and Sackpfeife- Thrusts, as well as further important thrust faults in the Lahn- and Dill Synclines. The basal thrust of the extremely thin-skinned Giessen Nappe is only recognizable for a very short distance.At depth, the thrusts flatten out in a relatively transparent zone between 3–5 s TWT, with strongly reflective bands at its bottom and top. The transparent zone might correlate with a high-conductivity layer detected in a magnetotelluric survey; it represents either graphitic metapelites or a zone with an interconnected, brine-filled pore space. The seismic record relates either to lithological differences, or to rheological boundaries.The lower crust in the north is characterized by a relatively transparent zone, which wedges out towards south under the northern margin of the Siegen Anticline. Comparisons with a similar feature in the ECORS profile »Nord de la France« suggest that the transparent zones in both sections correspond to a pre-Palaeozoic basement, such as it underlies the Brabant Massif. Further south, the lower crust is increasingly reflective.The curvilinear, thrust-related reflections are cut by a conjugate set of much weaker, N- and S-dipping reflectors indicating a later deformation with pure shear. Displacement of some marker reflections suggests late- or post-Variscan compression.In an alternative interpretation, these straight and weak reflections represent the only thrust faults, while the curvilinear elements might relate to bedding.A southward rise of the Moho from approx. 11 to 8.5 s TWT is probably due to Tertiary rifting.

---

Zusammenfassung Das reflexionsseismische Profil DEKORP 2-N stellt einen fast vollständigen Querschnitt durch das Rhenohercynikum dar.Der nördliche Teil des Profiles 2-N sowie ein SW/NE-verlaufender Abzweig (2-N-Q) zeigen die Transgression der Münsterländer Kreide und das unterlagernde gefaltete Paläozoikum. Schichtgebundene Reflektoren (flözführendes Karbon, devonischer Massenkalk) bilden das Ausklingen der variscischen Faltung nach NW detailliert ab.In den devonischen und vordevonischen Sedimenten des rechtsrheinischen Schiefergebirges erzeugt die Schichtung nur relativ schwache, kurze und unregelmäßige Reflexionen. Diese werden von stärkeren, südfallenden Reflektoren abgeschnitten, die aufgrund ihrer listrischen Krümmung und flat/ramp-Geometrie wahrscheinlich als Überschiebungen zu interpretieren sind. Im Nordteil des Schiefergebirges sind diese Überschiebungen offenbar blind, werden also nahe der Oberfläche durch Faltung kompensiert. Im Ebbe-Sattel und weiter südlich lassen sich die meisten der starken, südfallenden Reflektoren zweifelsfrei mit bekannten Großüberschiebungen korrelieren (Ebbe-, Siegen-, Müsen-, Sackpfeife-Ü, sowie weitere Überschiebungen in der Lahn- u. Dill-Mulde). Die Basisüberschiebung der Giessen-Decke wird nur teilweise abgebildet.Zur Tiefe hin zeigen die Überschiebungen ein zunehmend flacheres Einfallen, und verschwinden in einer relativ transparenten Zone zwischen 3 und 5 s TWT, die im Hangenden und Liegenden durch dünne, stark reflektive Zonen begrenzt ist. Diese transparente Zone entspricht möglicherweise einer Zone hoher integrierter Leitfähigkeit, die in einem begleitenden magnetotellurischen Experiment nachgewiesen worden ist; es handelt sich entweder um einen Graphit-führenden Phyllit-Horizont oder eine mächtigere permeable Zone mit Elektrolyt-gefülltem Porenraum. Die hochreflektiven Bänder über und unter der transparenten Zone entsprechen entweder lithologischen Kontrasten oder rheologischen Grenzen, die vermutlich von einer scherenden Verformung überprägt worden sind.Die Unterkruste im N-Teil des Profiles enthält einen relativ transparenten Bereich, der nach Süden hin unter dem Nordteil des Siegener Sattels keilförmig ausläuft. Ein ähnliches Bild zeigt der Nordteil des ECORS-Profiles »Nord de la France«. Die transparenten Bereiche beider Profile entsprechen wahrscheinlich einem prä-paläozoischen kristallinen Basement, das das Brabanter Massif unterlagert und sich rechtsrheinisch fortsetzt. Südlich des transparenten Keiles wird die Unterkruste zunehmend reflexionsreicher. Die listrisch gekrümmten, an Überschiebungen gebundenen Reflektoren werden von einem konjugierten System schwächerer, N- u. S-fallender Reflektoren abgeschnitten, die auf eine jüngere, bruchhafte Verformung durch reine Scherung hindeuten. Der Versatz einiger älterer Reflektoren deutet auf spät- oder postvariscische Kompression hin.In einer alternativen Interpretation werden nur diese jüngeren Reflektoren als Überschiebungen gedeutet; die älteren, gekrümmten Elemente müßten dann primären lithologischen Grenzen entsprechen.Die Moho steigt von ca. 11 s TWT im N auf 8.5 s TWT unter dem Taunus an. Die Krustenverdünnung im Süden geht wahrscheinlich auf Dehnung im Tertiär zurück.

---

Résumé Le profil sismique par réflexion DEKORP-2-N représente une transversale quasiment complète à travers la zone rhénohercynienne. La partie septentrionale du DEKORP-2-N ainsi qu'une branche de direction SW-NE (2-N-Q) mettent en évidence la transgression du Crétacé du Münsterland sur le Paléozoïque sous-jacent plissé. Des réflecteurs liés à la stratification (à savoir: le Houiller et les calcaires de plate-forme dévoniens) illustrent de façon détaillée la diminution vers le nord de l'intensité du plissement varisque.Dans les sédiments dévoniens et pré-dévoniens du Massif Rhénan à l'est du Rhin, la stratification ne fournit que que des réflexions relativement faibles, courtes et irrégulières. Elles sont tronquées par des réflecteurs plus intenses, à pendage sud qui, en raison de leur courbure listrique et de leur géométrie en «flat/ramp», doivent être interprétés comme des chevauchements. Dans la partie septentrionale du Massif, ces chevauchements sont apparemment aveugles, c'est-à-dire qu'ils sont compensés, près de la surface, par le plissement. Dans l'anticlinal d'Ebbe, ainsi que plus au sud, la plupart des réflecteurs intenses à plongement sud peuvent être corrélés avec des chevauchements majeurs connus, tels ceux de Ebbe, Siegen, Müsen, Sackpfeife et d'autres encore dans les synclinaux de la Lahn et de la Dill. Le chevauchement basai de la nappe de Giessen n'est que partiellement représenté.Les chevauchements deviennent de plus en plus plats en profondeur pour disparaître dans une zone relativement transparente qui se situe entre 3–5 sec TWT. Celle-ci est prise en sandwich par des zones minces à forte réflectivité. La zone transparente correspond probablement à une zone de conductivité intégrée élevée dont l'existence a par ailleurs été démontrée dans un essai magnétotellurique mené parallèlement. Il s'agit soit d'un horizon phyllitique graphiteux, soit d'une zone perméable plus épaisse dont les pores sont remplis d'électrolyte. Les bandes à haute réflectivité au-dessus et en-dessous de la zone transparente correspondent soit à des contrastes lithologiques, soit à des limites rhéologiques probablement accentuées par la déformation cisaillante.La croûte inférieure dans la partie septentrionale du profil comporte un domaine relativement transparent qui s'amincit vers le S et se termine, en dessous de la partie nord de l'anticlinal de Siegen, en forme de coin. La partie nord du profil ECORS «Nord de la France» montre une image semblable.Les domaines transparents des deux profils correspondent vraisemblablement à un soubassement cristallin pré-paléozoïque qui est sousjacent au Paléozoïque du Massif du Brabant et se prolonge vers l'est au-delà du Rhin. Au sud du coin transparent, la réflectivité de la croûte inférieure va en augmentant. Les réflecteurs listriques liés à des chevauchements sont recoupés par un système conjugué de réflecteurs plus faibles à plongement nord et sud qui indiquent des failles plus récentes. Le déplacement de quelques réflecteurs plus anciens suggère l'effet d'une compression tardiou post-varisque.Dans une interprétation alternative, seuls ces réflecteurs plus récents sont considérés comme correspondant à des chevauchements. Dans ce cas, les éléments courbes plus anciens devraient représenter des limites lithologiques primaires.Le Moho s'élève à partir de 11 sec TWT environ au nord jusqu'à 8.5 sec TWT en-dessous du Taunus. L'amincissement crustal au sud résulterait du régime de distension survenu au Tertiaire.

---

DEKORP 2 Nord. x-t- ray-tracing'a. 6,0 6,6 /, — 7,0 8,2 /. 6,25 /. 28 30 . , .

---

Abbreviations MORB Mid-Ocean Ridge Basalt - TWT two-way travel time, seconds (s) - CMP common mid-point - VP vibration point - SNR signal to noise ratio     

Land-surface scheme validation using the Oklahoma Atmospheric Surface-layer Instrumentation System (OASIS) and Oklahoma Mesonet data: Preliminary results

Summary The Oklahoma Atmospheric Surface-layer Instrumentation System (OASIS) is a recently-developed observational system that collects, archives, and quality controls atmospheric, surface, and soil data in real-time from 90 stations across Oklahoma. Ten of the 90 sites, termed “super sites”, are equipped with additional sonic anemometry and four-component net radiometers to provide complete observations of the surface energy balance. Oklahoma Mesonet and OASIS data are used in this study to validate the sensitivity and accuracy of a land-surface scheme within a numerical prediction model. The Advanced Regional Prediction System (ARPS) is a three-dimensional, nonhydrostatic mesoscale model developed by the Center for Analysis and Prediction of Storms (CAPS) at the University of Oklahoma. The land-surface model (LSM) used within ARPS is the Interactions Soil Biosphere Atmosphere (ISBA) scheme. Mesonet and OASIS data collected from the super site located in Norman, Oklahoma, are used as verification for the ISBA. Research presented in this study outlines the challenges in developing, maintaining, and using in-situ data for model validation. Such problems as instrument error, surface heterogeneity, and non-closure of the surface energy budget limit data accuracy. Preliminary results of model validation focus on the sensitivity of the soil physics within the ISBA scheme. Model sensitivity to vegetation cover, surface roughness, and soil type are investigated. Furthermore, several recent improvements to ISBA are evaluated and compared to observations. This study concludes that the sensitivity of the ISBA to a priori soil and vegetation type is detrimental for this scheme to be used in a mesoscale model without improved treatment of surface heterogeneity. Received November 18, 2001 Revised December 28, 2001