90Sr and137Cs contents in the surface waters of the adjacent seas of Japan and the North Pacific during 1969 to 1973

The concentrations of⁹⁰Sr and¹³⁷Cs, derived from the radioactive fallout, in the surface layers of the adjacent seas of Japan and the North Pacific were determined radiochemically during 1969 to 1973. The⁹⁰Sr and¹³⁷Cs concentrations in sea water decreased markedly with increase of the depth and below the depth of 1,000 m, the concentrations were approximately uniform. The distribution of⁹⁰Sr in the surface water of the North Pacific in spring of 1970 was approximately uniform, except two regions; rather large low-concentration region between 160°E and 170°W and relatively higher contamination area around 32°N and 146°W.     

Anomalous Rayleigh-Wave Propagation Along Oceanic Trench

A clear later phase of amplitude larger than the direct surface wave packet was observed at stations in Hokkaido, Japan, for several events of the December 1991 off-Urup earthquake swarm in the Kuril Islands region. From its particle motion, this phase is likely to be a fundamental Rayleigh wave packet that arrived with an azimuth largely deviated from each great-circle direction. As its origin, Nakanishi (1992) proposed that the sea-trench topography in this area as deep as 10 km may produce a narrow zone of low velocity for Rayleigh waves of periods around 15 sec. Following this idea, we compute ray paths and estimate how Rayleigh waves would propagate if we assume that lateral velocity variations are caused only by seafloor topography. We confirm that thick sea water in the trench indeed produces the phase velocity of Rayleigh waves to be smaller than in a surrounding area by the degree over 100%. Such a low-velocity zone appears only in a period range from 12 to 20 sec. Although this strong low-velocity zone disturbs the direction of Rayleigh wave propagation from its great circle, the overall ray paths are not so affected as far as an epicentre is outside this low-velocity zone, that is, off the trench axis. In contrast, the majority of rays are severely distorted for an event within the low-velocity zone or, in other words, in the neighborhood of the trench axis. For such an event, a part of wave energy appears to be trapped in this zone and eventually propagates outwards due to the curvature or bend of trench geometry, resulting in very late arriving waves of large amplitude with an incident direction clearly different from great circles. This phenomenon is observed only at a very limited period range around 16 sec. These theoretical results are consistent with the above mentioned observation of Nakanishi (1992).     

Spectroscopic properties of Cr-doped and Cr,Li-doped synthetic forsterite crystals

Cr-droped and Cr,Li-doped forsterite crystals were grown and their optical properties were investigated. It was shown that when only Cr is doped, Cr³⁺ is substituted at the site of low crystal field, and the energy level ²E lie above the ⁴T₂ level, while ⁴T₂ is just above ²E when Cr and Li are codoped. The difference was rationalized by a deformation of the Cr substituted site with the introduction of Li.     

Human impacts on large benthic foraminifers near a densely populated area of Majuro Atoll, Marshall Islands

Human impacts on sand-producing, large benthic foraminifers were investigated on ocean reef flats at the northeast Majuro Atoll, Marshall Islands, along a human population gradient. The densities of dominant foraminifers Calcarina and Amphistegina declined with distance from densely populated islands. Macrophyte composition on ocean reef flats differed between locations near sparsely or densely populated islands. Nutrient concentrations in reef-flat seawater and groundwater were high near or on densely populated islands. δ¹⁵N values in macroalgal tissues indicated that macroalgae in nearshore lagoons assimilate wastewater-derived nitrogen, whereas those on nearshore ocean reef flats assimilate nitrogen from other sources. These results suggest that increases in the human population result in high nutrient loading in groundwater and possibly into nearshore waters. High nutrient inputs into ambient seawater may have both direct and indirect negative effects on sand-producing foraminifers through habitat changes and/or the collapse of algal symbiosis.     

Geochemical assessment of arsenic contamination in well water and sediments from several communities in the Nawalparasi District of Nepal

Arsenic contamination of well water is a serious issue in the Nawalparasi District of the Terai region in Nepal. A local investigation was carried out on 137 tube wells in 24 communities of the district in December 2011. The investigation revealed that the average arsenic concentration in the tube wells was 350 μg/L, and that nearly 98 % of the wells exceeded the WHO guideline arsenic level limit of 10 μg/L. Highly contaminated well water, with more than 400 μg/L of arsenic, was found within the limited depth ranges of 18–22 and 50–80 m. High arsenic levels exceeding 500 μg/L were detected in shallower wells at Patkhauli, Mahuawa, Thulokunwar, and Goini located between 27.517° and 27.543°N and between 83.648° and 83.748°E. Boring sampling at five communities of Kashiya, Goini, Sanokunwar, Thulokunwar, and Mahuawa revealed two aquifers located at the two depths around 14–22 and 41–50 m in each community. Dark gray or black-colored peaty clay layers rich in organic matter were distributed at depths of 18–21 m beside the upper aquifers with high arsenic concentration in each community. Positive correlations were shown between iron and arsenic in the sediments from the five communities. It can be inferred that these results were caused by dissolution of iron-oxyhydroxide molecules with arsenic from solid phases. Microbial metabolisms have a great potential to induce the dissolution and release arsenic attached on the solid phases into aqueous phases depending on the level of redox potential and pH.     

Origin of the Moon — Capture by gas drag of the Earth's primordial atmosphere

We propose a new scenario of the lunar origin, which is a natural extension of planetary formation processes studied so far by us in Kyoto. According to these studies, the Earth grew up in a gaseous solar nebula and, consequently, the sphere of its gravitational influence (i.e., the Hill sphere of the Earth) was filled by a gas forming a dense primordial atmosphere of the Earth. In the later stages, this atmosphere as well as the solar nebula was dissipated gradually, owing to strong activities of the early-Sun in a T Tauri-stage.In the present and the subsequent papers, we study a series of dynamical processes where a lowenergy (i.e., slightly unbound) planetisimal is trapped within the terrestrial Hill sphere, under the above-mentioned circumstances that the gas density of the primordial atmosphere is gradually decreasing. It is clear that two conditions must be satisfied for the lunar origin: first, an unbound planetesimal entering the Hill sphere have to dissipate its kinetic energy and come into a bound orbit before it escapes from the Hill sphere and, second, the bound planetisimal never falls onto the surface of the Earth.In this paper we study the first condition by calculating the oribital motion of a planetesimal in the Hill sphere, which is affected both by solar gravity and by atmospheric gas drag. The results show that a low-energy planetisimal with the lunar mass or less can be trapped in the Hill sphere with a high probability, if it enters the Hill sphere at stages before the atmospheric density is decreased to about 1/50 of the initial value.In the subsequent paper, the second condition will be studied and it will be shown that a tidal force, among other forces, is very important for a trapped planetesimal to avoid collision with the Earth and stay eternally in the Hill sphere as a satellite.     

Spectroscopic Studies of Solar Corona VIII. Temperature and Non-Thermal Variations in Steady Coronal Structures

With a view to investigate variations in parameters of coronal emission lines over a large range of radial distance from the limb, raster scans were made with sufficiently long exposure times on several days during September – October 2003. An analysis of the data shows that (i) in most of the coronal structures, the FWHM of the Fe xiv 5303 Å line decreases up to 300″±50″, (ii) the FWHM of the Fe x 6374 Å line increases up to about 200″ and then remains unchanged up to about 500″, and (iii) the FWHMs of the Fe xi 7892 Å and Fe xiii 10747 Å lines show an intermediate behaviour with height. The analysis of the data also shows that the ratio of FWHM of 6374 Å to that of 5303 Å increases from 0.93 at the limb to 1.18 at 200″ above the limb. From this and the ratio of intensities of the two lines we infer that the plasma in steady coronal structures at a height of about 200″ has a temperature of about 1.5 MK and a non-thermal velocity around 17 km s^?1. The observations also show that non-homogeneous temperatures and non-thermal velocities largely exist in the lower corona up to about 300″±100″ above the limb. Amplitudes of variations in FWHM of different emission lines with height in the coronal loops are similar to those in the diffuse plasma around the coronal loops.     

Analysis of saturated dense sand-structure system and comparison with results from shaking table test

An effective stress method is presented for the analysis of liquefaction of ground including soil-structure interaction, based on an explicit-implicit finite element method. A simple constitutive model is developed to be incorporated in the effective stress method. The constitutive model consists of the Ramberg-Osgood model extended to two-dimensional problems and a new dilatancy model. The effectiveness of the constitutive model is examined with results of a simple shear test. Besides, the effective stress method is verified by comparing its numerical results with results of a shaking table test. It is found that the present method can simulate well the response of a saturated dense sand-structure system. The difference of the response computed by the effective stress method and the total stress method is discussed. It is found that the total stress method can simulate the response of the saturated sand within an accumulating excess pore water pressure of less than 70 per cent of the initial overburden stress.     

Identification of yield drift deformations and evaluation of the degree of damage through the direct sensing of drift displacements

Inter‐story drift displacement data can provide useful information for story damage assessment. The authors' research group has developed photonic‐based sensors for the direct measurement of inter‐story drift displacements. This paper proposes a scheme for evaluating the degree of damage in a building structure based on drift displacement sensing. The scheme requires only measured inter‐story drift displacements without any additional finite element analysis. A method for estimating yield drift deformation is proposed, and then, the degree of beam end damage is evaluated based on the plastic deformation ratios derived with the yield drift deformation values estimated by the proposed method. The validity and effectiveness of the presented scheme are demonstrated via experimental data from a large‐scale shaking table test of a one‐third‐scale model of an 18‐story steel building structure conducted at E‐Defense. Copyright © 2016 John Wiley & Sons, Ltd.