Delineation of riparian vegetation from Landsat multi‐temporal imagery using PCA

A deficiency in crucial digital data, such as vegetation cover, in remote regions is a challenging issue for water management and planning, especially for areas undergoing rapid development, such as mining in the Pilbara, Western Australia. This is particularly relevant to riparian vegetation, which provides important ecological services and, as such, requires regional protection. The objective of this research was to develop an approach to riparian vegetation mapping at a regional scale using remotely sensed data. The proposed method was based on principal component analysis applied to multi‐temporal Normalized Difference Vegetation Index datasets derived from Landsat TM 5 imagery. To delimit the spatial extent of riparian vegetation, a thresholding method was required and various thresholding algorithms were tested. The accuracy of results was estimated for various Normalized Difference Vegetation Index multi‐temporal datasets using available ground‐truth data. The combination of a 14‐dry‐date dataset and Kittler's thresholding method provided the most accurate delineation of riparian vegetation.     

Controls of 234Th removal from the oligotrophic ocean by polyuronic acids and modification by microbial activity

To gain new insights into the variability of particulate organic carbon (POC) fluxes and to better understand the factors controlling the POC/²³⁴Th ratios in suspended and sinking particulate matter, we investigated the relationships between POC/²³⁴Th ratios and biochemical composition (uronic acids, URA; total carbohydrates, TCHO; acid polysaccharides, APS; and POC) of suspended and sinking matter from the Gulf of Mexico in 2005 and 2006. Our data show that URA/POC in sediment traps (STs), APS/POC in the suspended particles, and turnover times of particulate ²³⁴Th in the water column and those of bacteria in STs inside eddies usually increased with depth, whereas particulate POC/²³⁴Th (10–50 μm) and the sediment-trap parameters (POC flux, POC/²³⁴Th ratio, bacterial biomass, and bacterial production) decreased with depth. However, this trend was not the case for most biological parameters (e.g., phytoplankton and bacterial biomass) or for the other parameters at the edges of eddies or at coastal-upwelling sites.In general, the following relationships were observed: 1) ²³⁴Th/POC ratios in STs were correlated with APS flux, and these ratios in the 10–50 μm suspended particles also correlated with URA/POC ratios; 2) neither URA fluxes nor URA/POC ratios were significantly related to bacterial biomass; 3) the sum of two uronic acids (G2, glucuronic, and galacturonic acid, which composed most of the URA pool) was positively related to bacterial biomass; and 4) the POC/²³⁴Th ratios in intermediate-sized particles (10–50 μm) were close to those in sinking particles but much lower than those in > 50 μm particles. The results indicate that acid polysaccharides, though a minor fraction (~ 1%) of the organic carbon, act more likely as proxy compound classes that might contain the more refractory ²³⁴Th-binding biopolymer, rather than acting as the original ²³⁴Th “scavenger” compound. Moreover, these acid polysaccharides, which might first be produced by phytoplankton and then modified by bacteria, also influence the on-and-off “piggy-back” processes of organic matter and ²³⁴Th, thus causing additional variability of the POC/²³⁴Th in particles of different sizes.     

Effects of sediment burial on tropical ruderal seagrasses are moderated by clonal integration

Seagrasses are clonal plants that grow submerged in dynamic sedimentary environments where burial is a common occurrence. Clonal organisms may respond to burial in very different ways depending on how strongly integrated they are through horizontal rhizomes, but the effect of clonal integration under conditions of stress such as burial is poorly studied for seagrasses. We test the effect of burial on tropical seagrasses that occur in multispecific meadows by subjecting plants in mixed stands to burial of 0, 2, 4, 8 and 16 cm for 27 days. Treatments were divided into those where rhizomes were severed and those where rhizomes were left intact. We hypothesize that species withstand burial better if clonal integration is maintained (intact rhizomes). Results showed that all species tolerated burial of up to 4 cm without adverse effects but significant reductions in shoot density and biomass become evident at 8 cm of burial. Furthermore, Cymodocea serrulata and Syringodium isoetifolium were strong integrators, i.e. they provide support for buried shoots, whereas Halophila ovalis and Halodule uninervis were weak integrators that did not show evidence of subsidizing buried shoots. Vertical elongation was observed for C. serrulata and H. uninervis as a response to burial only when rhizomes were severed, leading us to speculate on whether species rely on vertical elongation as an escape strategy only in the absence of resource translocation. Our distinction between the responses of treatments with intact rhizomes from those with severed rhizomes may be extended to an interpretation of burial scale (intact rhizomes=broad spatial?scale burial; severed rhizomes=fine spatial?scale burial). We concluded that broad spatial?scale burial exceeding 4 cm leads to rapid loss or reduction of all species. However, fine spatial–scale burial exceeding 4 cm, such as those caused by shrimp mounds (bioturbation), is expected to favor C. serrulata and S. isoetifolium, while H. ovalis and H. uninervis are disadvantaged. Clonal integration is an important trait in moderating the response of seagrasses to sediment burial and in this way, helps them to cope in high-stress habitats.     

Diurnal variation of precipitation over the Carolina Sandhills region

The Carolina Sandhills are known to have an area of maximum precipitation on its western boundary during the summer mainly due to differences in soil types. Statistical analysis was performed on summer precipitation data from automated weather stations in the Carolinas, along the Sandhills for the years 2001 to 2006. Statistically significant difference was observed between the day and night precipitation amounts. A case study also revealed the diurnal pattern of convective precipitation.     

Petrogenesis of municipal solid waste combustion bottom ash

A petrographic study was conducted on a suite of bottom ash particles from 3 different modern municipal solid waste combustors. The object of the study was to evaluate the mineralogical characteristics and formation process of the bottom ash by using standard geological techniques of light microscopy, electron microscopy, and X-ray microanalysis. This information was subsequently used to model the bottom ash petrogenesis based upon an examination of the mineralogy, melt structure, and composition of the ash.Bottom ash can be divided into two major groups: 1) refractory waste products and 2) melt products. The refractory waste products consist largely of rock and mineral fragments, various waste metals, and unmelted glass shards. The melt products consist of two distinct glasses: 1) isotropic glass, and 2) opaque glass. Complex silicate minerals are precipitated from and are abundant in the isotropic glass whereas both metal oxide and silicate minerals are precipitated from the opaque glass.The isotropic and opaque glasses formed simultaneously in different locations on the combustor grate. The contrast in melting (liquidus) temperatures shown by these glasses suggests that the isotropic melts were produced at localized hot spots (1500°C to 1650°C) and the opaque melts formed at cold spots (1150°C to 1400°C) on the grate. This could be the result of heterogeneous distribution of combustible municipal solid waste on the grate or from localized hot spots where air is introduced through the grates. In some instances the two glasses then had the opportunity to variably mix with each other. Fe-oxides represent waste metal fragments that were assimilated by melting and later recrystallized.Bottom ash is produced via a co-mingled two melt system that forms melilite-bearing, alkaline, volcanic-like rocks. The great similarity of the bottom ash residues between these 3 different MSW combustors suggests that, despite variable combustor designs and heterogeneous waste feed, high temperature combustion of MSW produces bottom ash of fairly uniform composition and structure that formed via the petrogenetic process described above. Alterations to the combustion process or implementations of secondary treatment technologies may render the bottom ash residue into a more environmentally stable material better suited for aggregate or long term secure disposal in landfills.     

Ten guiding principles for the delineation of priority habitat for endangered small cetaceans

The adoption of endangered species laws in various nations has intensified efforts to better understand, and protect, at-risk species or populations, and their habitats. In many countries, delineating a portion of a species' habitat as particularly worthy of protection has become a mantra of these laws. Unfortunately, the laws themselves often provide scientists and managers with few, if any, guidelines for how to define such habitat. Conservationists and scientists may view protecting part of the habitat of an endangered species as an ineffectual compromise, while managers may be under pressure to allow a range of human activities within the species' habitat. In the case of small cetaceans, establishing boundaries for such areas can also be complicated by their mobility, the fluid nature of their environment, and the often ephemeral nature of their habitat features. The convergence of multiple human impacts in coastal waters around the world is impacting many small cetaceans (and other species) that rely on these areas for feeding, reproducing, and resting. The ten guiding principles presented here provide a means to characterize the habitat needs of small, at-risk cetaceans, and serve as a basis for the delineation of ‘priority habitat’ boundaries. This conceptual approach should facilitate a constructive discourse between scientists and managers engaged in efforts to recover endangered species. The degree to which the recovery of an at-risk species can be reconciled with sustainable economic activity will depend in part on how well these principles are incorporated into the delineation of priority habitat.     

Understanding melt generation beneath the slow-spreading Kolbeinsey Ridge using U, Th, and Pa excesses

To examine the petrogenesis and sources of basalts from the Kolbeinsey Ridge, one of the shallowest locations along the global ridge system, we present new measurements of Nd, Sr, Hf, and Pb isotopes and U-series disequilibria on 32 axial basalts. Young Kolbeinsey basalts (full-spreading rate = 1.8 cm/yr; 67°05′-70°26′N) display (²³⁰Th/²³⁸U) < 1 and (²³⁰Th/²³⁸U) > 1 with (²³⁰Th/²³⁸U) from 0.95 to 1.30 and have low U (11.3-65.6 ppb) and Th (33.0 ppb-2.40 ppm) concentrations. Except for characteristic isotopic enrichment near the Jan Mayen region, the otherwise depleted Kolbeinsey basalts (e.g. ⁸⁷Sr/⁸⁶Sr = 0.70272-0.70301, ε_Nd = 8.4-10.5, ε_Hf = 15.4-19.6 (La/Yb)_N = 0.28-0.84) encompass a narrow range of (²³⁰Th/²³²Th) (1.20-1.32) over a large range in (²³⁸U/²³²Th) (0.94-1.32), producing a horizontal array on a (²³⁰Th/²³²Th) vs. (²³⁸U/²³²Th) diagram and a large variation in (²³⁰Th/²³⁸U). However, the (²³⁰Th/²³⁸U) of the Kolbeinsey Ridge basalts (0.96-1.30) are inversely correlated with (²³⁴U/²³⁸U) (1.001-1.031). Samples with low (²³⁰Th/²³⁸U) and elevated (²³⁴U/²³⁸U) reflect alteration by seawater or seawater-derived materials. The unaltered Kolbeinsey lavas with equilibrium ²³⁴U/²³⁸U have high (²³⁰Th/²³⁸U) values (?1.2), which are consistent with melting in the presence of garnet. This is in keeping with the thick crust and anomalously shallow axial depth for the Kolbeinsey Ridge, which is thought to be the product of large degrees of melting in a long melt column. A time-dependent, dynamic melting scenario involving a long, slowly upwelling melting column that initiates well within the garnet peridotite stability zone can, in general, reproduce the (²³⁰Th/²³⁸U) and (²³¹Pa/²³⁵U) ratios in uncontaminated Kolbeinsey lavas, but low (²³¹Pa/²³⁵U) ratios in Eggvin Bank samples suggest eclogite involvement in the source for that ridge segment.     

The effect of CO2 on the measurement of 220Rn and 222Rn with instruments utilising electrostatic precipitation

In some volcanic systems, thoron and radon activity and CO₂ flux, in soil and fumaroles, show a relationship between (²²⁰Rn/²²²Rn) and CO₂ efflux. It is theorized that deep, magmatic sources of gas are characterized by high ²²²Rn activity and high CO₂ efflux, whereas shallow sources are indicated by high ²²⁰Rn activity and relatively low CO₂ efflux. In this paper we evaluate whether the observed inverse relationship is a true geochemical signal, or potentially an analytical artifact of high CO₂ concentrations. We report results from a laboratory experiment using the RAD7 radon detector, known ²²²Rn (radon) and ²²⁰Rn (thoron), and a controllable percentage of CO₂ in the carrier gas. Our results show that for every percentage of CO₂, the ²²⁰Rn reading should be multiplied by 1.019, the ²²²Rn radon should be multiplied by 1.003 and the ²²⁰Rn/²²²Rn ratio should be multiplied by 1.016 to correct for the presence of the CO₂.