三维重力内波和对流云街的启动机制

在一个下部为弱不稳定层、上部为稳定层的二层模式中，求解线性化的大气动力—热力学方程组，表明一个孤立山丘所引发的重力内波，在向下游传播过程中与边界层中对流相互作用，形成大气低层的涡漩活动，其图象与观测到的对流云街结构相似。     

大气对流边界层中的涡漩结构

大气边界层中存在尺度从几百米到几十公里的大涡漩运动。它们在边界层中动量、热量、水汽等垂直输送中起重要作用。作者从边界层中对流和上部稳定层中波动相互作用的观点，发展得出大涡结构的对流波动理论。根据此理论，大涡的波谱构成主要由上、下层大气中风向、风速、层结以及两层之间的温度跃变等因素决定。本文根据卫星云图和天气资料分析了一次冷空气爆发流经暖洋面上形成云街、对流单体以及它们之间的相互演化的过程，并用对流波动理论，依据各阶段的大气条件计算出它们的波数构成，并得出了垂直速度、辐合带、界面扰动的分布，解释了云街、对流单体的形成、结构及相互转化的原因     

Application of an optimum design technique for determining the coefficient of consolidation by using piezocone test data

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results.     

松辽盆地第三系可地浸砂岩型铀矿找矿方向

松辽盆地是在兴蒙－吉黑海西褶皱带上发育起来的中、新生代大型陆相沉积盆地，基底主要为古生界浅变质岩，盖层主要是白垩系杂砂岩－有机页岩建造和新生界疏松碎屑堆积。笔者通过对前人资料分析研究后认为：松辽盆地具有良好的成矿地质条件和找矿前景；第三系是寻找可地浸砂岩型铀矿的主要目的层之一，层间氧化带型铀矿是主要寻找类型；盆地的西部和西南部是寻找可地浸砂岩型铀矿远景区。     

Regime interplay: the case of biodiversity and climate change

In this paper, the interplay between the biodiversity and climate change regimes is examined in the context of a case study. An understanding of how the regimes interact is crucial to their successful operation, since it provides insight into how policy options might be drawn up to create synergy rather than conflict among the respective regimes’ objectives. Despite the increasing importance of the study of regime interplay, due to its potential influence on regime effectiveness, there is limited understanding of why regimes interact and how their interplay may affect their successful operation, since few empirical studies have been conducted in this area. By analysing the causes of the regime interplay and the potential effects thereof, this paper draws policy implications regarding how the interacting regimes might be better co-ordinated to create synergy.     

Influence of the total atmospheric optical depth and cloud cover on solar irradiance components

Broadband solar irradiance data obtained in the spectral range 400–940 nm at Kwangju, South Korea from 1999–2000 have been analyzed to investigate the effects of cloud cover and atmospheric optical depth on solar radiation components. Results from measurements indicate that the percentage of direct and diffuse horizontal components of solar irradiance depend largely on total optical depth (TOD) and cloud cover. During summer and spring, the percentages of diffuse solar irradiance relative to the global irradiance were 5.0% and 4.9% as compared to 2.2% and 3.0% during winter and autumn. The diffuse solar irradiance is higher than the direct in spring and summer by 24.2%, and 40.6%, respectively, which may largely be attributed to the attenuation (scattering) of radiation by heavy dust pollution and large cloud amount. In cloud-free conditions with cloud cover ≤2/10, the fraction of the direct and diffuse components were 66.0% and 34.0%, respectively, with a mean daily global irradiance value of 7.92±2.91 MJ m⁻² day⁻¹. However, under cloudy conditions (with cloud cover ≥8/10), the diffuse and direct fractions were 97.9% and 2.2% of the global component, respectively. The annual mean TOD under cloudless conditions (cloud cover≤2/10) yields 0.74±0.33 and increased to as much as 3.15±0.67 under cloudy conditions with cloud amount ≥8/10. An empirical formula is derived for estimating the diffuse and direct components of horizontal solar irradiance by considering the total atmospheric optical depth (TOD). Results from statistical models are shown for the estimation of solar irradiance components as a function of TOD with sufficient accuracy as indicated by low standard error for each solar zenith angle (SZA).     

Similarities between strike-slip faults at different scales and a simple age determining method for active faults

Abstract Several differently scaled strike‐slip faults were examined. The faults shared many geometric features, such as secondary fractures and linkage structures (damage zones). Differences in fault style were not related to specific scale ranges. However, it was recognized that differences in style may occur in different tectonic settings (e.g. dilational/contractional relays or wall/linkage/tip zones), different locations along the master fault or different fault evolution stages. Fractal dimensions were compared for two faults (Gozo and San Andreas), which supports the idea of self‐similarity. Fractal dimensions for traces of faults and fractures of damage zones were higher (D ～1.35) than for the main fault traces (D ～1.005) because of increased complexity due to secondary faults and fractures. Based on the statistical analysis of another fault evolution study, single event movements in earthquake faults typically have a maximum earthquake slip : rupture length ratio of approximately 10^?4, although this has only been established for large earthquake faults because of limited data. Most geological faults have a much higher maximum cumulative displacement : fault length ratio; that is, approximately 10^?2 to 10^?1 (e.g. Gozo, ～10^?2; San Andreas, ～10^?1). The final cumulative displacement on a fault is produced by accumulation of slip along ruptures. Hence, using the available information from earthquake faults, such as earthquake slip, recurrence interval, maximum cumulative displacement and fault length, the approximate age of active faults can be estimated. The lower limit of estimated active fault age is expressed with maximum cumulative displacement, earthquake slip and recurrence interval as T ? (d_max /u) · I(M).     

On the Effects of Non-planar Geometry for Blind Thrust Faults on Strong Ground Motion

— We quantify the effects of complex fault geometry on low-frequency (<1 Hz) strong ground motion using numerical modeling of dynamic rupture. Our tests include the computation of synthetic seismograms for several simple rupture scenarios with planar and curved fault approximations of the 1994 Northridge earthquake. We use the boundary integral equation method (BIEM) to compute the dynamic rupture process, which includes the normal stress effects along the curved fault geometries. The wave propagation and computation of synthetic seismograms are modeled using a fourth-order finite-difference method (FDM). The near-field ground motion is significantly affected by the acceleration, deceleration and arrest of rupture due to the curvature of the faults, as well as the variation in directivity of the rupture. For example, a 6-km-long hanging-wall or footwall splay with a maximum offset of 1 km can change 1-Hz peak velocities by up to a factor of 2-3 near the fault. Our tests suggest that the differences in waveform are larger on the hanging wall compared to those on the footwall, although the differences in amplitude are larger in the forward rupture direction (footwall). The results imply that kinematic ground motion estimates may be biased by the omission of dynamic rupture effects and even relatively gentle variation in fault geometry, and even for long-period waves.     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.     

吉林六批叶沟金矿床绢云母40Ar-39Ar 快中子活化法定年研究

在六批叶沟金矿石中,精选出与金矿物同期生成的绢云母作为样品,采用40Ar-39Ar快中子活化法测年,获得8个一致相连的平坦型绢云母年龄谱,tp=(190.28±0.30) Ma,氩同位素计算得等时线年龄为(189.98±0.58) Ma,两者完全吻合.等时线截距为(296.9±10.0) Ma,与大气氩的该值(295.5 Ma)相比较,两者完全吻合,表明该样品出自未受明显后期热力作用影响的非扰动体系.锁定六批叶沟金矿床主要成矿年龄为190 Ma左右,属早侏罗世的燕山早期.