<Emphasis Type="Italic">Cochlodinium polykrikoides</Emphasis> red tide detection in the South Sea of Korea using spectral classification of MODIS data

To distinguish true red tide water (particularly Cochlodinium polykrikoides blooms) from non-red tide water (false satellite high chlorophyll water) in the South Sea of Korea, we developed a systematic classification method using spectral information from MODIS level products and applied it to five different harmful algal bloom events. Red tide and nonred tide waters were classified based on four different criteria. The first step revealed that the radiance peaks of potential red tide water occurred at 555 and 678 nm. The second step separated optically different waters that were influenced by relatively low and high contributions of colored dissolved organic matter (CDOM) (including detritus) to chlorophyll. The third and fourth steps discriminated red tide water from non-red tide water based on the blue-to-green ratio in areas with lower and higher contributions of CDOM to chlorophyll, respectively. After applying the red tide classification (using the four criteria), the spectral response of the red tide water, which is influenced by pigment concentration, showed different slopes for the blue and green bands (lower slope at blue bands and higher slope at green bands). The opposite result was found for non-red tide water, due to decreasing phytoplankton absorption and increasing detritus/CDOM absorption at blue bands. The results were well matched with the discoloration of water (blue to dark red/brown) and delineated the areal coverage of C. polykrikoides blooms, revealing the nature of spatial and temporal variations in red tides. This simple spectral classification method led to increase user accuracy for C. polykrikoides and non-red tide blooms (>46% and >97%) and provided a more reliable and robust identification of red tides over a wide range of oceanic environments than was possible using chlorophyll a concentration, chlorophyll anomaly, fluorescence analysis, or proposed red tide detection algorithms.     

Modeling and control of a 75 kW class variable liquid-column oscillator for highly efficient wave energy converter

The modeling and control of a variable liquid-column oscillator having a liquid filled U-tube with air chambers at its vertical columns are presented. As an ocean wave energy extracting device, the structure of the variable liquid-column oscillator (VLCO) is analogous to that of the tuned liquid-column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. However, owing to an air spring effect caused by the dynamic pressure of air chambers, the amplitude of response of the VLCO becomes significantly amplified for a desired wave period. The governing equations for the motion of VLCO structure under wave excitation and the motion of liquid with an air spring effect caused by an air–liquid interaction are described by a series of nonlinear differential equations. A set of control parameters for extracting maximum power from various wave conditions is determined for the efficient operation of the VLCO. It is found that the effect of the air spring has an important role to play in making the oscillation of the VLCO match with the ocean wave. In this way, the VLCO provides the most effective mode for extracting energy from the ocean wave.     

Integrated Geological–Geophysical and Oceanographic Research in the South China Sea: Cruise 88 of the R/V “Akademik M.A. Lavrentyev”

Oceanology - Abstract—The paper gives brief results of comprehensive studies in the South China Sea obtained from a joint Russian–Vietnamese expedition in November 2019 (cruise 88 of...     

Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

Impact of multiple satellite ocean color samplings in a day on assessing phytoplankton dynamics

Ocean-color imagers on conventional polar-orbiting satellites have a revisit time of ??2 days for most regions, which is further reduced if the area is frequently cloudy. The Geostationary Ocean Color Imager (GOCI), the first ocean-color imager on a geostationary satellite, provides measurements 8 times a day, thus significantly improving the frequency of measurements for studies of ocean environments. Here, we use results derived from GOCI measurements over Taihu Lake to demonstrate that the extra sampling can be used to improve the accuracy of statistically averaged longer-term (daily) measurements. Additionally, using numerical simulations, we demonstrate that the coupling of diurnal variations of both biomass and photosynthetic available radiation can improve the accuracy of daily primary production estimates. These results echo that higher sampling frequency can improve our estimates of longer-term dynamics of biogeochemical processes and highlights the value of ocean color measurements from geostationary satellites.     

Structural changes in macrozoobenthic communities due to summer hypoxia in Gamak Bay,Korea

The purpose of this study was to examine the structural changes that macrozoobenthic communities underwent as a result of the annual summer hypoxia at the northern part of Gamak Bay, Korea. During this study period, summer hypoxia occurred at the northern part of Gamak Bay in July. Under hypoxic conditions, both the number of species and population density decreased rapidly. Species diversity also manifested lower values during this hypoxic period. Faunal composition changed seasonally with Capitella capitata dominant at the hypoxic sites in spring but disappearing in summer. The health condition of the benthic faunal community assessed by the composition of functional groups within community also changed due to the summer hypoxia from a slightly polluted condition to a highly polluted condition. From these results it has been shown that the recent macrozoobenthic community structure in Gamak Bay has returned to a state similar to what it was before dredging works commenced.     

Peptide decomposition by extracellular hydrolysis in coastal seawater and salt marsh sediment

Extracellular peptide hydrolysis rates were measured in seawater and sediment from Flax Pond salt marsh using peptide analogs (LYA-peptides) as substrates. This technique allows the direct measurement of specific hydrolysis products and thus provides insights into enzymatic hydrolysis pathways. In sediments, hydrolysis rate constants of LYA-peptides varied seasonally and with depth. Highest activity was found in spring and summer, and most cores exhibited a subsurface maximum. Calculations using the concentrations of chemically-measured peptides suggested that extracellular hydrolysis of peptides is faster than the rate of free amino acids uptake. However, not all peptides may be available for enzymatic hydrolysis. In both seawater and sediment, extracellular hydrolysis of peptides of up to 8 amino acids yielded smaller peptides and free amino acids. Hydrolysis rates depended on size of the peptide substrate, although a clear relationship with number of amino acid constituents was not evident. Peptides containing >2 amino acids were hydrolyzed 10–400 times faster than dipeptides or the fluorogenic substrate Leucine-MCA. Thus, dipeptidases are either uncommon in nature, or hydrolysis is carried out by nonspecific hydrolases that with a low affinity for dipeptides. This is also suggested by the presence of a lag time before dipeptide hydrolysis begins, and the absence of dipeptide hydrolysis in 0.2-μm-filtered. One implication of this finding is that measurements of hydrolysis rates using substrates like Leu-MCA may not accurately predict the magnitude of hydrolysis rates of macromolecules in the marine environment. Even though dipeptide hydrolysis is slow compared to that of larger peptides, LYA-dipeptides are preferentially produced from the hydrolysis of larger substrates. LYA-dipeptides do not penetrate cell membranes of microorganisms because of their size, but natural dipeptides are smaller and can be transported across the cell membrane. Since dipeptides do not appear to accumulate in natural waters, they must be rapidly removed by microorganisms.     

Effects of cold eddy on phytoplankton production and assemblages in Luzon strait bordering the South China Sea

The biochemical effects of a cold-core eddy that was shed from the Kuroshio Current at the Luzon Strait bordering the South China Sea (SCS) were studied in late spring, a relatively unproductive season in the SCS. The extent of the eddy was determined by time-series images of SeaWiFS ocean color, AVHRR sea surface temperature, and TOPEX/Jason-1 sea surface height anomaly. Nutrient budgets, nitrate-based new production, primary production, and phytoplankton assemblages were compared between the eddy and its surrounding Kuroshio and SCS waters. The enhanced productivity in the eddy was comparable to wintertime productivity in the SCS basin, which is supported by upwelled subsurface nitrate under the prevailing Northeastern Monsoon. There were more Synechococcus, pico-eucaryotes, and diatoms, but less Trichodesmium in the surface water inside the eddy than outside. Prochlorococcus and Richelia intracellularis showed no spatial differences. Water column-integrated primary production (IPP) inside the eddy was 2–3 times that outside the eddy in the SCS (1.09 vs. 0.59 g C m⁻²d⁻¹), as was nitrate-based new production (INP) (0.67 vs. 0.25 g C m⁻²d⁻¹). INP in the eddy was 6 times that in the Kuroshio (0.12 g C m⁻²d⁻¹). IPP and INP in the eddy were higher than the maximum production values ever measured in the SCS basin. Surface chlorophyll a concentration (0.40 mg m⁻³) in the eddy equaled the maximum concentration registered for the SCS basin and was higher than the wintertime average (0.29 ± 0.04 mg m⁻³). INP was 3.5 times as great and IPP was doubled in the eddy compared to the wintertime SCS basin. As cold core eddies form intermittently all year round as the Kuroshio invades the SCS, their effects on phytoplankton productivity and assemblages are likely to have important influences on the biogeochemical cycle of the region.     

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.     

A B-spline based higher order panel method for analysis of steady flow around marine propellers

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.