Constant slip rate during the late Quaternary along the Sulu He segment of the Altyn Tagh Fault near Changma,Gansu, China

The question of whether millennial‐scale geological slip rates are consistent with decade‐scale geodetic slip rates is of great importance in evaluating the nature of continental deformation within the Tibetan Plateau. We determined the time‐averaged slip rate of the Sulu He segment of the Altyn Tagh Fault, near Changma in Gansu Province, China, based on geomorphic analysis, remote sensing data, and cosmogenic ¹⁰Be surface‐exposure age dating. Quaternary alluvial fan deposits in the study area (Qf1, Qf2, Qf3) are displaced by left‐lateral movement along the Altyn Tagh Fault. Because of the large accumulated displacement of these fans, some of them have become disconnected from the fan apexes that are directly linked to the debris‐source areas in the piedmont of the Qilian Shan to the south. The total minimum offsets are estimated to be about 429 ± 41 m for Qf1, about 130 ± 10 m for Qf2, and 32 ± 1 m for Qf3. The ¹⁰Be surface‐exposure ages obtained for Qf1 and Qf2 are 100–112 ka and 31–43 ka, respectively. Accordingly, the slip rate since the period of Qf1 and Qf2 depositions is calculated to have been about 3.7 mm/yr.     

Flight test evaluation of ILS and GBAS performance at Gimpo International Airport

We address the differences in the ways the Instrument Landing System (ILS) and Ground-Based Augmentation System (GBAS) offer approach guidance, and their principles and methods. We perform comparative analysis of the accuracy of deviation between the GBAS Landing System (GLS) and ILS by means of flight tests, using the flight inspection aircraft at Gimpo International Airport. Our results show that the ILS deviation error increases as the distance between the threshold of runway and the aircraft increases; on the other hand, the GLS deviation error is stable, within the range of ±0.5 to ±2 m lateral and vertical deviation, respectively. We also analyze the alignment accuracy of the ILS and GLS based on the evaluation criteria of Category I of the Federal Aviation Administration, and our analysis results confirm that both systems satisfy the requirements (lateral: ±0.1°, vertical: ±0.05°).     

Molecular characterization of four genes highly expressed during megalopa stage in Chinese mitten crab,Eriocheir sinensis

Ocean Science Journal - The molecular markers to distinguish different larval stages have various applications in ecological studies. Using the differential display RT-PCR technique, we isolated...     

Paleo-shoreline changes in moraine dammed lake Khagiin Khar,Khentey Mountains,Central Mongolia

The formation and evolution of glacier moraine-dammed lakes are closely related to past glacier expansion and retreat. Geomorphic markers such as lacustrine terraces and beach ridges observed in these lakes provide important evidence for regional paleoenvironment reconstruction. We document the magnitude of paleo-shoreline fluctuations and timings of highstands of lake water by using cosmogenic ~(10)Be surface exposure dating and optically stimulated luminescence(OSL) dating on samples collected from lacustrine sediment and bedrock strath in Lake Khagiin Khar. The lake was initially impounded by glacier moraine at the Global Last Glacial maximum(gLGM; 21–19 ka), and the lake reached its maximum paleo-shoreline level of 1840 m at sea level(a.s.l.). At that time, the stored lake water amount was up to seven times greater and the surface area was three times larger than the present values. The paleolake experienced higher shoreline levels at 1832, 1822, and 1817 m a.s.l. and reached the present lake level after 0.4 ka. We interpret that decrease in the paleolake level was caused by spillover. The increase in melt water after the gLGM and the Late Glacial exceeded the storage threshold of the lake, and the paleolake water overflowed across the lowest drainage divides. The lake spilled over across the lowest bedrock ridge at 15.9 ± 0.6 ka, and the outlet was incised since that time at a rate of 3.72 ± 0.15 mm/yr. The initial stream of the Khiidiin Pass River was disturbed by LGM moraine damming and was rerouted into the present course running through moraine after the spillover at 15.9 ± 0.6 ka.     

结合全球气候模型预测结果概率分析融化深度

A probabilistic approach may be adopted to predict freeze and thaw depths to account for the variability of (1) material properties, and (2) contemporary and future surface energy input parameters (e.g.air temperatures, cloud cover, snow cover) predicted with global climate models. To illustratc the probabilistic approach, an example of the prediction of thaw depths in Fairbanks, Alaska, is considered, More specifically, the Stefan equation is used together with the Monte Carlo simulation technique to make a probabilistic prediction of thaw penetration. The simulation results indicate that the variability in material properties, surface energy input parameters, and temperature data can lead to significant uncertainty in predicting thaw penetration. The Taylor series method was performed to determine the mean and standard deviation of thaw penetration and the results were compared to the Monte Carlo simulation results. The close comparison of the results suggests that the simpler Taylor series method may be applied to many cold regions problems to account for the variability of input parameters.     

Coastal Pollution Mitigation with Lime and Zero Valent Iron

The Taiwan Strait region has many miles of coastline, and the Taiwan Straits Tunnel (TST) project faces many potential pollution problems as construction proceeds through sensitive areas. Conventional approaches for pollution mitigation require further examination. The recent development of nanoscale particle technology has shown distinct advantages for contaminant attenuation and ground improvement. This paper is focused on trace metals and is part of the overall effort to develop the nanoscale particle technology. Trace metals in ground and surface waters represent a continued threat to human and ecological health. One of the difficulties in removing toxic concentrations of trace metals from solution is the variable oxidation state and amphoteric nature of multiple constituents. In particular, while cationic metals (e.g., Pb²⁺, Cd²⁺, Ni²⁺) may be rendered less mobile under high pH conditions, anionic metals (e.g., AsO₄^3-, CrO₄^2-, SeO₄^2-)may become more mobile. The objective of this research was to evaluate the sorption of both cationic and anionic trace elements, including arsenic (As), cadmium (Cd), chromium (Cr) and selenium (Se) under batch conditions. Mixtures of a local residual soil were tested alone and in combination with lime and zero valent iron. It was hypothesized that lime would raise the pH and precipitate positively charged metals while zero valent iron would create reducing conditions favorable to the immobilization of negatively charged metals. Results indicate that the use of lime and/or zero valent iron can increase the sorption capacity of soil. Compared to the baseline soil, sorption capacity increased with addition of lime for arsenic and cadmium while it decreased for chromium and selenium. In the case of zero valent iron addition, sorption capacity increased for cadmium, chromium and selenium, while showing no change for arsenic. When both lime and zero valent iron were used, the sorption capacity increased for all metals tested. These results suggest that the combined use of lime and zero valent iron may serve as an alternative treatment technology for removing trace metals from contaminated water systems.     

Propagation characteristics of historical tsunamis that attacked the east coast of Korea

In this study, a numerical modeling system based on the dispersion–correction finite difference scheme equipped with a grid-nesting scheme is constructed. The model is applied to simulate the propagation of three historical tsunami events that attacked the east coast of Korea. The calculated free-surface displacements for the cases of the 1983 Akita and the 1993 Okushiri tsunamis are compared with the observations at four tidal stations along the east coast of Korea. The comparison shows that the results agree well with the observations. The analyses of the simulated results show that underwater topography, such as submerged rises and ridges, plays an important role in the propagation of tsunamis in this region.     

Landforms and landscape evolution in the Skardu,Shigar and Braldu Valleys,Central Karakoram

The Central Karakoram, which includes K2 in Pakistan, is one of the most rapidly rising areas on Earth and exhibits complex topography and extreme relief. Impressive valley fills and glacial landforms are present throughout the valleys. The dynamics of landscape evolution of the region are currently not well understood. Consequently, the landforms were mapped and assessed in the Skardu, Shigar, and Braldu valleys, to elucidate the spatio-temporal scale dependencies of surface processes active in the region. These valleys were examined using geomorphic field methods, remote sensing, geomorphometry, and terrestrial cosmogenic nuclides (TCNs) surface exposure dating. The glaciers in this region have oscillated considerably throughout the Late Quaternary, and four glacial stages have been recognized including at least six glacial advances. Surface processes readjusted after glacier retreat, and ubiquitous mass movements and catastrophic landsliding transported material from steep slopes to valley bottoms, while glaciofluvial meltwater and glacier outburst floods redistributed sediment down valley. Glacier geochronology and late Holocene ages of the outburst flood deposits indicate that landscape evolution has been dominated by glaciation and paraglaciation during the late Quaternary.     

2D acoustic‐elastic coupled waveform inversion in the Laplace domain

Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models.