Crustal structure of the Southwest Subbasin,South China Sea,from wide-angle seismic tomography and seismic reflection imaging

The Southwest Subbasin (SWSB) is an abyssal subbasin in the South China Sea (SCS), with many debates on its neotectonic process and crustal structure. Using two-dimensional seismic tomography in the SWSB, we derived a detailed P-wave velocity model of the basin area and the northern margin. The entire profile is approximately 311-km-long and consists of twelve oceanic bottom seismometers (OBSs). The average thickness of the crust beneath the basin is 5.3 km, and the Moho interface is relatively flat (10–12 km). No high velocity bodies are observed, and only two thin high-velocity structures (~7.3 km/s) in the layer 3 are identified beneath the northern continent-ocean transition (COT) and the extinct spreading center. By analyzing the P-wave velocity model, we believe that the crust of the basin is a typical oceanic crust. Combined with the high resolution multi-channel seismic profile (MCS), we conclude that the profile shows asymmetric structural characteristics in the basin area. The continental margin also shows asymmetric crust between the north and south sides, which may be related to the large scale detachment fault that has developed in the southern margin. The magma supply decreased as the expansion of the SWSB from the east to the west.     

Temporal Variability of Total Ozone in the Asian Region Inferred from Ground-Based and Satellite Measurement Data

This paper reports investigation data on the temporal variability of total ozone content (TOC) in the Central Asian and Tibet Plateau mountain regions obtained by conventional methods, as well as by spectral, cross-wavelet, and composite analyses. The data of ground-based observation stations located at Huang He, Kunming, and Lake Issyk-Kul, along with the satellite data obtained at SBUV/SBUV2 (SBUV merged total and profile ozone data, Version 8.6) for 1980–2013 and OMI (Ozone Monitoring Instrument) and TOU (Total Ozone Unit) for 2009–2013 have been used. The average relative deviation from the SBUV/SBUV2 data is less than 1% in Kunming and Issyk-Kul for the period of 1980–2013, while the Huang He Station is characterized by an excess of the satellite data over the ground-based information at an average deviation of 2%. According to the Fourier analysis results, the distribution of amplitudes and the periods of TOC oscillations within a range of over 14 months is similar for all series analyzed. Meanwhile, according to the cross-wavelet and composite analyses results, the phase relationships between the series may considerably differ, especially in the periods of 5–7 years. The phase of quasi-decennial oscillations in the Kunming Station is close to the 11-year oscillations of the solar cycle, while in the Huang He and Issyk-Kul stations the TOC variations go ahead of the solar cycle.     

Distribution of <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> in the southwestern Sea of Japan related to meandering of the Tsushima Warm Current

We investigated the horizontal distribution of Nemopilema nomurai medusae using a midwater trawl in the southwestern Sea of Japan from September to October of each year from 2006 to 2012. Numerous medusae of this species found in 2006, 2007, and 2009 were mainly distributed far (>40 km) from the mainland of Japan in the western part of the survey area, but were distributed in the stations closest (<25 km) to the mainland in the eastern part, particularly in 2006 and 2009. These distribution patterns were associated with the path of the second branch of the Tsushima Warm Current (TWC) that flows offshore to the west of Oki Islands and usually approaches the mainland of Japan to the east of Oki Islands. Differences in jellyfish distribution across the survey periods were related to the distribution of the second branch being associated with types, position and intensity of eddies in the eastern part of the survey area. Hence, the formations of eddies and consequent variation in the path of the TWC would be responsible for transporting medusae from offshore to near the mainland to the east of Oki Islands. Individuals with large bells accumulated in the northwestern part of the survey area, where a cyclonic eddy was present downstream of the third branch of the TWC. This variation in bell size distribution may be ascribed to differences in the physical and/or biological factors among the three branches of the TWC.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.     

Simple determination of dimethylsulfide (DMS) and dimethylsulfoniopropionate (DMSP) using solid-phase microextraction and gas chromatography-mass spectrometry

Solid-phase microextraction (SPME) is a simple, sensitive and less destructive method for the determination of dimethylsulfide (DMS) in seawater. Combined with detection by gas chromatography-mass spectrometry (GC-MS), the method had sufficient sensitivity (minimum detectable concentration of DMS was 0.05 nM), and practical levels of reproducibility (relative standard deviation ≤7%) and linearity (r ² > 0.995) over a wide concentration range (0.5 to 910 nM). The protocol developed was applied to a Sagami Bay water sample to determine concentrations of DMS and DMSP, and in situ DMSP-lyase activity.     

Geodynamics of the deep sedimentary basin of the Caspian Sea region: paragenetic correlation of seismicity and mud volcanism

In this paper we analyze seismic regime and earthquake depth distribution and correlation of seismicity and mud volcanism in the Azerbaijan and the Caspian Sea region. For the present region we have calculated accurate source locations, seismic activity, earthquake repetition and released earthquake energy parameters. It is shown that the active tectonic processes in the region are concentrated within the thick sedimentary cover that we consider as a general source of contemporary stress and a main structural element responsible for the origin of regional earthquakes. The correlation of seismicity and mud volcanism is of paragenetic character.     

The fate of dumped sediments monitored by a high-resolution multibeam echosounder system,Weser Estuary,German Bight

With the development of high-resolution multibeam echosounder systems (MBES) for surveying shallow-water areas a new tool is available to monitor rapid changes in seabed morphology as, e.g., caused by the dumping of dredge spoil in coastal waters. In this study, four data sets of repeated bathymetric surveys with a MBES were processed and analyzed. The data were collected in a 1.94-km² dumping site in the outer Weser Estuary (German Bight). Between June and December 1998, 2.6 million m³ of dredged sediment were deposited there. The bathymetric maps generated in the course of this study reveal features such as subaqueous dunes, scour holes, and mounds of dumped dredge spoil. The mean water depth decreased by about 1 m during the dumping period. Furthermore, difference grids showing changes in sediment volume allowed a calculation of the sediment budget for the monitored area. After a time period of only 5 months, 0.5 million m³ of the originally dumped 2.6 million m³ of dredge spoil had already been removed from the dumping site.     

Improving strategies with constraints regarding non-Gaussian statistics in a three-dimensional variational assimilation method

We assess validity of a Gaussian error assumption, the basic assumption in data assimilation theory, and propose two kinds of constraints regarding non-Gaussian statistics. In the mixed water region (MWR) off the east coast of Japan exhibiting complicated frontal structures, a probability density function (PDF) of subsurface temperature shows double peaks corresponding to the Kuroshio and Oyashio waters. The complicated frontal structures characterized by the temperature PDF sometimes cause large innovations, bringing about a non-Gaussianity of errors. It is also revealed that assimilated results with a standard three-dimensional variational (3DVAR) scheme have some issues in MWR, arising from the non-Gaussianity of errors. The Oyashio water sometimes becomes unrealistically cold. The double peaks seen in the observed temperature PDF are too smoothed. To improve the assimilated field in MWR, we introduce two kinds of constraints, J _c1 and J _c2, which model the observed temperature PDF. The constraint J _c1 prevents the unrealistically cold Oyashio water, and J _c2 intends to reproduce the double peaks. The assimilated fields are significantly improved by using these constraints. The constraint J _c1 effectively reduces the unrealistically cold Oyashio water. The double peaks in the observed temperature PDF are successfully reproduced by J _c2. In addition, not only subsurface temperature but also whole level temperature and salinity (T–S) fields are improved by adopting J _c1 and J _c2 to a multivariate 3DVAR scheme with vertical coupled T–S empirical orthogonal function modes.     

Seasonal variation of eddy shedding from the Kuroshio intrusion in the Luzon Strait

Altimeter data and output from the HYbrid Coordinate Ocean Model global assimilation run are used to study the seasonal variation of eddy shedding from the Kuroshio intrusion in the Luzon Strait. The results suggest that most eddy shedding events occur from December through March, and no eddy shedding event occurs in June, September, or October. About a month before eddy shedding, the Kuroshio intrusion extends into the South China Sea and a closed anticyclonic eddy appears inside the Kuroshio loop which then detaches from the Kuroshio intrusion. Anticyclonic eddies detached from December through February move westward at a speed of about 0.1 m s⁻¹ after shedding, whereas eddies detached in other months either stay at the place of origin or move westward at a very slow speed (less than 0.06 m s⁻¹). The HYCOM outputs and QuikSCAT wind data clearly show that the seasonal variation of eddy shedding is influenced by the monsoon winds. A comparison between eddy volume and integrated Ekman transport indicates that, once the integrated Ekman transport exceeds 2 × 10¹² m³ (which roughly corresponds to the volume of an eddy), the Kuroshio intrusion expands and an eddy shedding event occurs within 1 month. We infer that the Ekman drift of the northeasterly monsoon pushes the Kuroshio intrusion into the SCS, creates a net westward transport into the Strait, and leads to an eddy detachment from the Kuroshio.