The Red Sea depositional architecture: insights from 3D modeling

More than half a century of geological and exploration studies have taken place in the Red Sea area, and still very limited information is available to the geological community in regard to the lithological distribution and the stratigraphic architecture. In this study, extensive well data was used to build the first lithologic and stratigraphic 3D models of the entire Red Sea to better understand the lithological distribution. The potential models have been constrained by bathymetric and geophysical data. Studied data demonstrate that up to 5 km of sediments were deposited in the Red Sea. It is mainly comprised of limestones, evaporites, and shales. Our models show that the evaporite body represents more than 70% of the Red Sea succession. In particular, the evaporite succession seems to be well developed in the southern region. Salt dome features are present and developed close to the margins. The models suggest that domal formation did not enable thick carbonate accumulation in some parts of the basin but the carbonate generally follows the evaporite trend. The models help to identify the main controls leading to salt diapir by highlighting the distribution of this body and the geometry of geological structures. Syn-rift faulting and rifting has been one of the most prominent structural features. Complex interplay of tectono-stratigraphic events played a significant role in shaping the stratigraphic evolution of the Red Sea basin with multiple evolution phases of paleoenvironment and paleogeographic were recognized based on the models. Our synthesis and interpretation support that moderately deep marine conditions dominated in the Miocene, whereas shallow seas dominated the whole basin during the Plio-Pleistocene period as a result of episodic marine invasion. However, lacustrine environment may have prevailed at the Oligocene time in isolated half grabens.     

Synthesis of biochar from sugarcane filter-cake and its impacts on physiological performance of lettuce (<Emphasis Type="Italic">Lettuce sativa</Emphasis>) grown on cadmium contaminated soil

Soil contamination with cadmium has become major concern all over the world because of its adverse impacts on ecosystem health and agricultural land. Soil amendment with biochar may have varied effects on physical and chemical properties of soil. The objective of the study was to explore the impact of sugarcane filter-cake biochar on physiological performance and growth of lettuce in an aged soil. Four different doses (0, 1.5%, 3%, and 5%) of biochar were used in the soil and conditioned for 1 month. After this, lettuce seedlings were grown in the soil. The results showed that the biochar treatment improved the fresh and dry biomass of leaves and roots as well as plant height while diminished the bioavailability of cadmium from the soil. As compared to control, biochar significantly enhanced the chlorophyll content in lettuce leaves. Due to the biochar amendment, the oxidative stress decreased in lettuce shoots over the control. As compared to control, concentration of cadmium in lettuce significantly decreased after the application of biochar. It was concluded that biochar could mitigate the toxicity of cadmium in lettuce by altering the biochemical and physiological processes in cadmium contaminated soil.     

A new record and a new ichnospecies of Arachnostega from the Middle Miocene of Egypt

The ichnogenus Arachnostega Bertling, 1992 is recorded for the first time from a bioeroded, coral-rich, Middle Miocene limestone bed in the middle Siwa Escarpment Member (Marmarica Formation) at Siwa Oasis, northern Western Desert of Egypt. These burrowing traces are preserved on the surface of a few internal moulds of bivalves and gastropods. Until now, the ichnogenus Arachnostega included a single ichnospecies, A. gastrochaenae Bertling, 1992. In the material studied herein, two ichnospecies are identified, described, illustrated and compared with other, similar traces. One of these is a new ichnospecies of Arachnostega; this is here named A. siwaensis ichnosp. nov. It is distinguished from A. gastrochaenae in the possession of tunnels that usually branch in a V-pattern; intervals of ramification are longest in the main branch and decrease in second- and third-order branches. Arachnostega traces were produced in a warm, low-energy, shallow-marine (<10?m water depth) environment. Polychaetes are the most likely producers of marine Arachnostega, which are commonly occurred in the same studied bed. This new occurrence is significant in extending the known stratigraphical and geographical ranges of Arachnostega into the Middle Miocene of Egypt.     

A Kinematic Model of the Formation of the Sim Trough of the Uralian Foredeep

The structural features and mechanism of the formation of the Sim trough within the Uralian Foredeep, as well as the development of the entire Karatau–Suleiman block, are considered. This wedge-shaped block was subject to lateral extrusion to the north along conjugated strike-slip fault zones under a general latitudinal compression. This factor determined the local meridional compression and latitudinal extension of the block. In the central part of the block, the latitudinal extension was compensated by gradual subsidence, which resulted in the formation of the Sim trough.     

Effect of loading duration on uncertainty in creep analysis of clay

Some studies suggest that creep parameters should be determined using a greater quantity of creep test data to provide more reliable prediction regarding the deformation of soft soils. This study aims to investigate the effect of loading duration on model updating. One‐dimensional consolidation data of intact Vanttila clay under different loading durations collected from the literature is used for demonstration. The Bayesian probabilistic method is used to identify all unknown parameters based on the consolidation data during the entire consolidation process, and their uncertainty can be quantified through the obtained posterior probability density functions. Additionally, the optimal models are also determined from among 9 model candidates. The analyses indicate that the optimal models can describe the creep behavior of intact soft soils under different loading durations, and the adopted method can evaluate the effect of loading duration on uncertainty in the creep analysis. The uncertainty of a specific model and its model parameters decreases as more creep data are involved in the updating process, and the updated models that use more creep data can better capture the deformation behavior of an intact sample. The proposed method can provide quantified uncertainty in the process of model updating and assist engineers to decide whether the creep test data are sufficient for the creep analysis.     

Prediction of Engineering Properties of Basalt Rock in Jordan Using Ultrasonic Pulse Velocity Test

Basalt is an extrusive igneous rock derived from Lava and spread over different localities in Jordan. It can be used in industrial applications, and as construction materials. Before using basalt, it is essential to determine its dry density, porosity, uniaxial compressive strength, and Brazilian tensile strength. The testing procedure and sample preparation used to determine the engineering properties are time-consuming and need expertise. Hence, the ultrasonic pulse velocity (UPV) test, a quick and non-destructive evaluation method, was used to determine the engineering properties. Empirical relationships for determination of dry density, porosity, uniaxial compressive strength, Brazilian tensile strength, and tangent modulus of elasticity were deduced. Good correlation coefficients (R²?=?0.832–0.929) were obtained between UPV and dry density, porosity, uniaxial compressive strength, Brazilian tensile strength and modulus of elasticity. These correlations were limited to intact basalt with UPV?≥?4000 m/s.     

Geographic information science and the analysis of place and health

The representation of place is a key theoretical advancement that geographic information science can offer to improve the understanding of environmental determinants of health, but developing robust computational representations of place requires a substantial departure from conventional notions of geographic representation in GIS. Unlike conventional GIS representations based on either objects or locations, we suggest that place representation should incorporate dynamic subjective, experiential, and relational aspects of place, as the influence of place on health behavior concerns not only the features that can be objectively observed at a particular location but also the environmental perceptions of the individual, as molded by biological, social, and experiential characteristics. In addition, assessments of environmental exposures on health outcomes should focus on individuals' time–activity patterns and microenvironment profiles, which form a potentially unique personalized exposure environment for each individual. Addressing these representational challenges via collaborative research has the potential to advance both geographic information science and health research.     

Chemical oceanographic influences on sediment accumulations of a carbonate ramp: Holocene Yucatan Shelf,Mexico

Global controls on the oceanographic influences on the nature of carbonate factories are broadly understood. The details of the influences of changes in temperature and nutrients across individual carbonate shelves are less well constrained, however. This study explores spatial and temporal variations in chemical oceanography along and across the Yucatan Shelf, a modern carbonate ramp, and how these factors relate to variable bottom character, sediment and sediment geochemistry. In‐situ sensors and remote‐sensing data indicate the sporadic presence of cool, upwelled water with low dissolved oxygen and elevated Chlorophyll‐a. This current‐driven, westward flow of upwelled water is most evident in a zone just offshore of the northern peninsular shoreline, but its influence wanes ca 75 km offshore and as the shore turns southward. The impacts of this water mass include a transitional photozoan–heterozoan assemblage with biosiliceous components, relict grains and common thin Holocene sediment accumulations nearshore; further offshore are coralgal reefs and expansive sand plains. Geochemical proxies of bulk sediment, including high δ¹⁸O and elevated HREE/LREE (heavy rare‐earth element/light rare‐earth element) ratios near, and downcurrent of, the upwelling source, are interpreted to represent the signal of nearshore, westward movement of the cool and nutrient‐rich, upwelled water. Collectively, these data emphasize how local processes such as upwelling and longshore transport can variably influence carbonate sediment accumulations and their geochemical signatures, both along and across individual shelves. These data and insights provide an analogue for the influences of spatial variability of water masses in the geological record, and for accurate interpretation of stratigraphic changes of sedimentary and geochemical proxy data in carbonate archives.     

Convergence acceleration of iterative sequences for equilibrium chemistry computations

Computational Geosciences - The modeling of thermodynamic equilibria leads to complex nonlinear chemical systems which are often solved with the Newton-Raphson method. But this resolution can lead...     

Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.