Does stress transmission in forelands depend on structural style? Distinctive stress magnitudes during Sevier thin‐skinned and Laramide thick‐skinned layer‐parallel shortening in the Bighorn Basin (USA) revealed by stylolite and calcite twinning paleopiezometry

The Sheep Mountain‐Little Sheep Mountain Anticlines, Bighorn Basin (USA) formed as basement‐cored Laramide structures in the formerly undeformed foreland of the thin‐skinned Sevier orogen. We take advantage of the well‐constrained microstructural network there to reconstruct differential stress magnitudes that prevailed during both Sevier and Laramide layer‐parallel shortening (LPS), before the onset of large‐scale folding. Differential stress magnitudes determined from tectonic stylolites are compared and combined to previous stress estimates from calcite twinning paleopiezometry in the same formations. During stress loading related to LPS, differential stress magnitudes transmitted from the distant Sevier thin‐skinned orogen into the sedimentary cover of the Bighorn basin (11–43 MPa) are higher than the differential stress magnitudes accompanying the early stage of LPS related to the thick‐skinned Laramide deformation (2–19 MPa). This study illustrates that the tectonic style of an orogen affects the transmission of early orogenic stress into the stable continental interior.     

High‐ to ultrahigh‐temperature metamorphism in the lower crust: An example resulting from Hikurangi Plateau collision and slab rollback in New Zealand

Lower crustal xenoliths erupted from an intraplate diatreme reveal that a portion of the New Zealand Gondwana margin experienced high‐temperature (HT) to ultrahigh‐temperature (UHT) granulite facies metamorphism just after flat slab subduction ceased at c. 110–105 Ma. P–T calculations for garnet–orthopyroxene‐bearing felsic granulite xenoliths indicate equilibration at ~815 to 910°C and 0.7 to 0.8 GPa, with garnet‐bearing mafic granulite xenoliths yielding at least 900°C. Supporting evidence for the attainment of HT and UHT conditions in felsic granulite comes from re‐integration of exsolution in feldspar (~900–950°C at 0.8 GPa), Ti‐in‐zircon thermometry on Y‐depleted overgrowths on detrital zircon grains (932°C ± 24°C at aTiO₂ = 0.8 ± 0.2), and correlation of observed assemblages and mineral compositions with thermodynamic modelling results (≥850°C at 0.7 to 0.8 GPa). The thin zircon overgrowths, which were mainly targeted by drilling through the cores of grains, yield a U–Pb pooled age of 91.7 ± 2.0 Ma. The cause of Late Cretaceous HT‐UHT metamorphism on the Zealandia Gondwana margin is attributed to collision and partial subduction of the buoyant oceanic Hikurangi Plateau in the Early Cretaceous. The halt of subduction caused the fore‐running shallowly dipping slab to rollback towards the trench position and permitted the upper mantle to rapidly increase the geothermal gradient through the base of the extending (former) accretionary prism. This sequence of events provides a mechanism for achieving regional HT–UHT conditions in the lower crust with little or no sign of this event at the surface.     

Late Ordovician climbing‐dune cross‐stratification: a signature of outburst floods in proglacial outwash environments?

Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.     

Clay mineralogy as a tool for integrated sequence stratigraphic and palaeogeographic reconstructions: Late Oligocene–Early Aquitanian western internal South Iberian Margin,Spain

The different hydrodynamic behaviour of detrital clay minerals in the marine depositional environment allows assessment of relative sea‐level variations in the sedimentary record. Comparison of smectite and kaolinite:illite (S+K:I) changes with the global sea‐level curves and with the third‐order cycles of the eustatic curve for European basins allows assessment of the influence of global eustasy and local tectonics on sequence stratigraphy. In the South Iberian Margin, sedimentation took place both on open‐marine platforms and in deeper water areas. On this margin during the Late Oligocene to Early Aquitanian, the variations in sedimentation were caused not only by global eustasy but also by compressive tectonics. Correlations were made between the S+K:I cycles and the third‐order cycles for European basins, enabling the definition of four third‐order sedimentary sequences (here called C1, C2, C3, and A1) and two lower‐order sequences within C3 and A1 (here called C3a, C3b, A1a, and A1b) related to tectonic movements. High S+K:I values were observed during episodes of maximum flooding in each sequence and lower‐order sequence and in each succession, enabling changes in palaeocoastal morphology to be considered. Copyright © 2012 John Wiley & Sons, Ltd.     

One‐dimensional consolidation with a threshold gradient: a Stefan problem with rate‐dependent latent heat

During the process of one‐dimensional consolidation with a threshold gradient, the seepage front moves downward gradually, and the problem is indicated as a Stefan problem. The novel feature in this Stefan problem is a latent heat that varies inversely with the rate of the moving boundary. An exact solution for the external load that increases in proportion to the square root of time is constructed using the similarity transformation technique. Computational examples concerning the effect of different parameters on the motion of the seepage front are presented. The exact solution provides a worthwhile benchmark for verifying the accuracy of numerical and approximate methods. Copyright © 2013 John Wiley & Sons, Ltd.     

Buried and Submerged Greek Archaeological Coastal Structures and Artifacts as Gauges to Measure Late Holocene Seafloor Subsidence off Calabria,Italy

This synthesis integrates recently acquired archaeological and geological data with earlier documented observations to shed light on the subsidence of ancient Greek coastal facilities in southern Italy. These are now positioned between former shorelines and inner shelf sectors at five Calabrian margin localities. Submergence of coastal to inner shelf facilities has resulted in part from sea‐level rise by about 2 m associated with glacio‐hydro‐isostatic factors since archaic to classic Greek time. This phenomenon alone, however, does not explain the wide variation of measured subsidence rates from site‐to‐site. The marked lowering of coastal site substrates by seismo‐tectonic activity (including extensional fault motion), stratal readjustments at depth, and compaction of underlying sediment sequences is significant. Four of the subsided facilities are positioned near emerged Calabrian areas where prevailing Holocene average annual land uplift rates range to ˜1.0 mm/yr; at the fifth, near Hipponion, terrains have risen by nearly 2 mm/yr. In marked contrast, submerged and/or buried structures record the following late Holocene long‐term average rates of coastal margin subsidence: Sybaris‐Thuri on the Taranto Gulf margin (˜0.5–1.0 mm/yr); Hipponion‐Vibo Valentia along the Tyrrhenian coast (˜0.8 to ˜3.2 mm/yr); and Locri‐Epizefiri, Kaulonia, and Capo Colonna on Calabria's Ionian margin (˜1.6, ˜1.6–2.4, and ˜4.0 mm/yr, respectively). © 2012 Wiley Periodicals, Inc.     

Convergence acceleration of iterative sequences for equilibrium chemistry computations

Computational Geosciences - The modeling of thermodynamic equilibria leads to complex nonlinear chemical systems which are often solved with the Newton-Raphson method. But this resolution can lead...     

The last deglaciation in the Picos de Europa National Park (Cantabrian Mountains,northern Spain)

A sedimentological and geochemical study of the Lago Enol sequence (Cantabrian Mountains, northern Spain), together with detailed geomorphological mapping, provides a first record of glacier evolution and climate change over the last 40 ka in the Picos de Europa National Park. The Enol glacier retreated from its maximum extent prior to 40 ka BP as demonstrated by the onset of proglacial lacustrine sedimentation in two glaciated depressions: the Comella hollow to the north (before 40 ka BP) and the Lago Enol (before 38 ka BP). These results support previous evidence that the maximum extent of southern European glaciers occurred earlier than in northern Europe. Alternation of homogeneous and laminated proglacial sediments during the glacier retreat illustrate a dynamic glacial evolution during the Marine Isotope Stage (MIS) 3 (40–26 ka BP). A slight warming is detected at 26 ka ago with the change from proglacial sediments (in a lake located in contact to the glacier) to glaciolacustrine sedimentation (in a non‐contact or distal lake). Finally, the onset of organic‐rich sediments took place at 18 ka ago. This last transition occurred in two phases, similarly to the North Atlantic Last Termination, suggesting a link between North Atlantic Deep Water formation oscillations and palaeohydrological variability in the Cantabrian Mountains. Copyright © 2009 John Wiley & Sons, Ltd.     

Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.     

Mapping groundwater conditions in different geological environments in the northern area of UAE using 2D earth resistivity imaging survey

A water resources database was developed and used to characterize the geological and hydrogeological settings of groundwater aquifers in the northern part of the United Arab Emirates. An intensive 2D Earth Resistivity Imaging (ERI) survey was conducted in selected areas to assess the available groundwater resources and delineate the salt-water intrusion. Drilling information of the existing monitoring wells as well as their records of water table elevations and groundwater salinity were used to measure the horizontal and vertical variations in lithology, degree of saturation, and groundwater salinity and thus to improve the interpretation of ERI data. The results of the chemical analyses of water samples collected from the wells along with the 2D ERI survey profiles were used to obtain an empirical relationship between the inferred earth resistivity and the amount of total dissolved solids. This relationship was used along with the true resistivity sections resulting from the inversion of 2D ERI data to identify and map three zones of water-bearing formation (fresh, brackish, and salt-water zones) in the coastal areas. The results indicated that the depth to the fresh-brackish interface exceeded 50 m at the upstream of the wadies and was in the order of 10 m or less in the vicinity of shoreline. Because of the high resistivity contrast between dry and water saturated fractured rocks; this method was very successful in detecting water-filled fractures and cavities in the carbonate aquifer. The application of this method was unsuccessful in clayey aquifers as it was not possible to isolate lenses of gravel and/or saturated with saline or brackish water from the surrounding clayey materials.