Modeling hydrologic responses of the Zwalm catchment using the REW approach: propagation of uncertainty in soil properties to model output

The research presented in this paper focuses on the application of a newly developed physically based watershed modeling approach, which is called representative elementary watershed approach. The study stressed the effects of uncertainty of input parameters on the watershed responses (i.e., simulated discharges). The approach was applied to the Zwalm catchment, which is an agriculture-dominated watershed with a drainage area of 114 km² located in East Flanders, Belgium. Uncertainty analysis of the model parameters is limited to the saturated hydraulic conductivity because of its high influence on the watershed hydrologic behavior and availability of the data. The assessment of output uncertainty is performed using the Monte Carlo method. The ensemble statistical watershed responses and their uncertainties are calculated and compared with measurements. The results show that the measured discharges fall within the 95% confidence interval of the modeled discharge. This provides the uncertainty bounds of the discharges that account for the uncertainty in saturated hydraulic conductivity. The methodology can be extended to address other uncertain parameters as far as the probability density function of the parameter is defined.     

Tectono-sedimentary evolution of the Miocene Oued Dayr Formation (Ghomaride Complex,Internal Domain of the Maghrebian Rif Belt,Morocco)

This work deals with sedimentological, petrographic, and structural analyses of a middle Miocene late-orogenic sedimentary cycle, denoted Oued Dayr Formation, recognized in the Rifian sector of the Maghrebian Chain (Morocco). The analyzed Formation (75 m thick) starts with 15–20 m of light colored polymict conglomerates, with minor sandstone beds, lying on the Paleozoic basement and Mesozoic cover of the Ghomaride Nappe. Facies analysis indicates a fining-upward deposition in a marine environment characterized by increasing deepening, reflecting a subsidence rate that exceeds sedimentary supply. Petrographic analysis points out that sandstones are represented by litharenites originated by erosion of recycled orogen. The conglomerates pebbles and cobbles consist of Alpine low- to high-grade metamorphic rocks as metarenites, phyllites, mylonitic quartzites, micaschists, augen gneisses deriving from the exhumed deep metamorphic basement, the overlying metasedimentary of the Sebtide Nappes and of sedimentary rocks as sandstones, jaspes, limestones, and shales deriving from the Ghomaride Nappes and their sedimentary cover. Data reveal mixed provenance indicating that the Oued Dayr Formation was fed by the Internal Nappes stack of the Maghrebian Chain. Structural analysis shows that the Oued Dayr Formation accumulated in a Thrust-Top basin, during an early extension (D₀ phase), recorded by synsedimentary normal faults within middle Langhian deposits on the rear of the Internal Nappes stack. Subsequent ductile and brittle compressional (D₁, D₂, D₃) and extensional (D₄) deformation phases occurred during and/or after the stacking, exhumation, and early unroofing of Sebtide Complex coeval with the opening of the western Mediterranean back-arc basins since middle Miocene time.     

Geological and geophysical investigation of Kamil crater,Egypt

Abstract– We detail the Kamil crater (Egypt) structure and refine the impact scenario, based on the geological and geophysical data collected during our first expedition in February 2010. Kamil Crater is a model for terrestrial small‐scale hypervelocity impact craters. It is an exceptionally well‐preserved, simple crater with a diameter of 45 m, depth of 10 m, and rayed pattern of bright ejecta. It occurs in a simple geological context: flat, rocky desert surface, and target rocks comprising subhorizontally layered sandstones. The high depth‐to‐diameter ratio of the transient crater, its concave, yet asymmetric, bottom, and the fact that Kamil Crater is not part of a crater field confirm that it formed by the impact of a single iron mass (or a tight cluster of fragments) that fragmented upon hypervelocity impact with the ground. The circular crater shape and asymmetries in ejecta and shrapnel distributions coherently indicate a direction of incidence from the NW and an impact angle of approximately 30 to 45°. Newly identified asymmetries, including the off‐center bottom of the transient crater floor downrange, maximum overturning of target rocks along the impact direction, and lower crater rim elevation downrange, may be diagnostic of oblique impacts in well‐preserved craters. Geomagnetic data reveal no buried individual impactor masses >100 kg and suggest that the total mass of the buried shrapnel >100 g is approximately 1050–1700 kg. Based on this mass value plus that of shrapnel >10 g identified earlier on the surface during systematic search, the new estimate of the minimum projectile mass is approximately 5 t.     

Phosphorus removal efficiency from wastewater under different loading conditions using sand biofilters augmented with biochar

Treated wastewater is a valuable resource, particularly in countries facing water shortage such as Jordan. Nevertheless, excess nutrients, especially phosphorus, may have detrimental impacts on receiving waterbodies. Treated wastewater in Jordan often exceeds the recommended levels set by the Jordanian Standards for wastewater reuse and discharge. Therefore, it is important to reduce phosphorus loads to acceptable levels before discharge. Biofiltration is a low-cost technology that has shown good potential for wastewater treatment. The performance of biofilters largely depends on the media used. In this study, local sand and sand augmented with biochar prepared from the olive oil processing waste (SBC) were used as filter media for phosphorus removal from clarified secondary treated wastewater. The two media types were tested under different hydraulic and phosphorus loading conditions to simulate shock, flooding, and inundation conditions. The results showed that sand media was more effective in removing phosphorus (90.8 ± 2.6%) than sand amended with biochar (83.3 ± 3.2%). Both media showed resilience under extreme loading conditions. Although phosphorus removal efficiency was negatively affected following the extreme loading events, the observed effects were temporary. The simulated inundation event further showed that the media was able to retain the adsorbed phosphorus. Furthermore, the phosphorus concentration in the effluent remained within the prescribed discharge guidelines at all times.     

Middle Miocene aquatic and wetland vegetation of the paleosinkhole at Tarnów Opolski,SW Poland

I analyzed spores, pollen and organic-walled algal remains in Middle Miocene deposits that filled a paleosinkhole at Tarnów Opolski, in the Upper Silesian Upland, Poland. Middle Triassic limestone bedrock in the study area underwent intense karstification under relatively warm and humid climate, resulting in development of numerous sinkholes. As the corrosion reached non-karstified marls, flowing water in the vadose zone was plugged and meteoric waters thus accumulated, leading to pond development. This palaeobotanical study was undertaken to “reconstruct” the fossil freshwater algae community and vegetation in and around the water body. Chlorophyta such as Botryococcus, filamentous algae from the family Zygnemataceae, mainly Mougeotia, Spirogyra and Zygnema, and desmids were important components of the algal assemblage. Most of the identified algae prefer mesotrophic to eutrophic conditions, and are characteristic of stagnant or slow-flowing shallow water. Among the free-floating and rooted plants were Salviniaceae/Azollaceae (probably Salvinia), Nuphar, Potamogeton, and carnivorous taxa such as Utricularia and probably Aldrovanda. The water body was surrounded by swamp vegetation composed of herbs such as Typha, Sparganium, Alismataceae and others, and riparian forests. The upper portion of the sediment section contains abundant pollen of swamp forest taxa such as Taxodium/Glyptostrobus, Nyssa and Alnus. The paleobotanical remains from the sinkhole at Tarnów Opolski suggest it was a shallow water body that was probably prone to rapid warming. Presence of resting cells, e.g. zygospores of Zygnemataceae and desmids, suggests that the pond may have dried periodically. Presence of Nuphar, Utricularia and Aldrovanda pollen, however, indicates long periods with standing water.     

Present recharge of an aquifer in a semi-arid region: an example from the Turonian limestones of the Errachidia basin, Morocco

 The Errachidia basin is composed of three superposed aquifers (Senonian, Turonian limestones and Infracenomanian). The Liassic limestone of the upper Atlas borders the northern part of the basin. The piezometric map of the Turonian aquifer displays a north-south flow, with an inflow area from the Atlas. This recharge hypothesis is demontrated by a discriminant analysis performed on chemical data: the majority of the spots are of sodium choride and hydrogenocarbonate types, while several boreholes are assigned to a calcium hydrogenocarbonate type Jurassic component. ¹⁸O measurements, using the Atlasic gradient δ¹⁸O=–4.18–0.0027 x elevation to estimate the recharge areas, confirm that the recharge area is the basin itself (<1100 m) on the Turonian outcrops, while in the confined part, the Turonian is recharged higher than 1400 m (corresponding to the Atlas). This contribution ranges from 56 to 85%, according to the situation versus the piezometric inflow area. The remainder represents infiltration and vertical leakage from the Senonian layers.     

Structure de socle,sismostratigraphie et héritage structural au cours du rifting au niveau de la marge d'Ifni/Tan-Tan (Maroc sud-occidental)

Seismic reflection profiles from the Ifni/Tan-Tan Atlantic margin of southern Morocco, interpreted in the light of well data and field geology from the Western Anti-Atlas, allowed us to establish the seismostratigraphic framework of the syn-rift series and to reveal (i) a compressional structural style in the pre-Triassic basement similar to that established in the adjacent outcropping onshore basement but with an opposed western vergence, (ii) the importance of inherited anterior structures in the formation of Triassic-Liassic rift structures and (iii) an east–west propagation of these rift structures. To cite this article: N. AbouAli et al., C. R. Geoscience 337 (2005).     

A comparative study of four vulnerability mapping methods in a detritic aquifer under mediterranean climatic conditions

This paper presents the results of a comparative study relating to the application of four vulnerability mapping methods, GOD, AVI, DRASTIC and SINTACS, in a pilot detritic aquifer situated in NW Morocco, known as the Martil–Alila aquifer. The principal objective of this work is to determine the most suitable such methods for this aquifer type within a Mediterranean context, and to show the effect of the rainfall variations that are characteristic of the Mediterranean climate on the degree of vulnerability. The methods applied distinguish five classes of vulnerability, these being irregularly divided up in space, with the division varying according to the method in question. The vulnerability maps obtained by the different methods strongly suggest that the eastern half of the aquifer is more vulnerable to contamination than the western half, for all hydrological situations. The effect of climatic conditions on the degree of vulnerability is well represented by the DRASTIC, according to which the aquifer is moderately to strongly vulnerable during humid hydrological years and weakly to moderately vulnerable during dry ones. For the other methods, this climatic effect is limited to the area occupied by the two predominant classes (“High” and “Low” for GOD and “High” and “Moderate” for SINTACS) while it is null for AVI. In conclusion, DRASTIC appears the most suitable for mapping the vulnerability to contamination of Mediterranean coastal detritic aquifers such as the Martil–Alila aquifer.     

Dependence of radon exhalation on grain size of sedimentary waste

Tailings resulted from sulphuric acid leaching process of uranium from sedimentary rocks contain high concentrations of ²²⁶Ra and its daughters, the most important of which is ²²²Rn. Movement of radon gas out of the tailings is strongly influenced by the physicochemical characteristics of these tailings especially their radium content and the grain size. So, the tailing samples were size fractionated into four sizes (>?250, 250–125, 125–74 and <?74 µm). The natural radioactivity was investigated using hyper-pure germanium detector and solid-state nuclear track detectors (CR-39) for bulk size and after size fractionation. The activity concentrations of different radionuclides in size-fractionated tailing samples have been shown to be strongly dependent on the size of the particles. In the range of >?250 and <?74 µm, the activity concentrations of ²³⁰Th, ²²⁶Ra, ²¹⁴Pb, ²¹⁴Bi, ²¹⁰Pb, ²³²Th and ⁴⁰K increased throughout with decreasing particle size, while that of ²³⁸U, ²³⁴U and ²³⁵U have an opposite effect. The results revealed an inverse relationship between the radon exhalation rate and size fractionation. Also, the results showed a good correlation between radium activity concentration and radon mass exhalation rate.     

Centrifuge modelling of reverse fault–foundation interaction

The propagation of reverse faults through soil to the ground surface has been observed to cause damage to surface infrastructure. However, the interaction between a fault propagating through a sand layer and a shallow foundation can be beneficial for heavily loaded foundations by causing deviation of the fault away from the foundation. This was studied in a series of centrifuge model tests in which reverse faults of dip angle 60° (at bedrock level) were initiated through a sand layer, close to shallow foundations. The tests revealed subtle interaction between the fault and the shallow foundation so that the foundation and soil response depend on the foundation loading, position, breadth and flexibility. Heavily loaded rigid foundations appeared best able to deviate fault rupture away from the foundation but this deviation could be associated with significant foundation rotations. However, a lightly loaded foundation was unable to deviate a reverse fault and the fault emerged beneath the foundation. This led to gapping beneath the foundation as well as significant rotations and may cause severe structural distress. As well as providing insight into the mechanisms of behaviour, the data from the tests is used to validate finite element analyses in a separate article.