Tafoni development in a cryotic environment: an example from Northern Victoria Land,Antarctica

Tafoni are a type of cavernous weathering widespread around the world. Despite the extensive distribution of the tafoni, their genesis is not clear and is still a matter of debate, also because they occur in such different climatic conditions and on so many different types of substrate. Geomorphological characterization of more than 60 tafoni in three different Antarctic sites (two coastal and one inland) between 74 and 76° S with sampling of weathering products and salt occurrences are described together with thermal data (on different surfaces) and wind speed recorded in different periods of the year in a selected tafone close to the Italian Antarctic station. The aim of this present study is to provide further information to help understand the processes involved in the growth of tafoni in a cryotic environment, and the relationship of these processes to climate, with particular attention to the thermal regime and the role of wind. The new data presented in this paper suggest that there is no single key factor that drives the tafoni development, although thermal stress seems the most efficient process, particularly if we consider the short‐term fluctuations. The data also confirm that other thermal processes, such as freezing–thawing cycles and thermal shock, are not really effective for the development of tafoni in this area. The wind speed measured within the tafoni is half that recorded outside, thus favouring snow accumulation within the tafoni and therefore promoting salt crystallization. On the other hand, the wind effect on the thermal regime within the tafoni seems negligible. While both salt weathering and thermal stress appear active in this cryotic environment, these are azonal processes and are therefore active in other climatic areas where tafoni are widespread (such as the Mediterranean region). Copyright © 2007 John Wiley & Sons, Ltd.     

Weathering of granite in Antarctica: II. Thermal stress at the grain scale

Granular disintegration has long been recognized and referred to in weathering texts from all environments, including the Antarctic. Despite this universal identification and referral, few to no data exist regarding thermal conditions at this scale and causative mechanisms remain little more than conjecture. Here, as part of a larger weathering study, thermal data of individual grains (using infrared thermometry and ultra‐fine thermocouples) composing a coarse granite, as well as the thermal gradients in the outer 10 cm (using thermistors), were collected from a north‐facing exposure. Measurements were also made regarding the surface roughness of the rock. Based on recorded temperatures, the nature of the rock surface and the properties of the minerals, an argument is made for complex stress fields that lead to granular disintegration. Mineral to mineral temperature differences found to occur were, in part, due to the changing exposure to solar radiation through the day (and through seasons). Because the thermal conductivity and the coefficient of thermal expansion of quartz are not equal in all directions, coupled with the vagaries of heating, this leads to inter‐granular stresses. Although fracture toughness increases with a decrease in temperature, it is suggested that the tensile forces resulting from falling temperatures are able to exceed this and produce granular disassociation. The lack of equality with respect to crystal axis of both thermal conductivity and expansion in quartz further exacerbates the propensity to failure. Grain size and porosity also influence the thermal stresses and may help explain why some grains are held in place despite disassociation near the surface. While the data presented here appear to beg more questions than providing answers, they do provide a basis for better, more detailed studies of this important weathering scale. Copyright © 2007 John Wiley & Sons, Ltd.     

Object-oriented classification of very high resolution airborne imagery for the extraction of hedgerows and field margin cover in agricultural areas

The recent advancement in technology for the airborne collection and subsequent processing and analysis of digital remotely sensed data has been significant. An investigation into the contributions that recent developments have made to the assessment and extraction of hedgerow and field margins is presented. Research into the active legislation by which hedgerows and agricultural biodiversity in England are bound is brought together in the concept of an ideal classification. Using Leica Geosystems ADS40 data, collected for Berkshire (UK), the degree to which the ideal classification can be reached is investigated, focusing on the extraction of hedgerows and unploughed field margin protective boundary strips as image objects. Elevation data were derived from the ADS40 imagery data to accompany true-colour and colour-infrared spectral information. By buffering the detected hedgerow objects in a GIS, we facilitated an investigation of the presence of measures that satisfy the minimum hedgerow protection requirements stipulated by the UK Department for Environment, Food and Rural Affairs (DEFRA). In our study area, it was estimated that 68% of areas that need to be classified as ‘grassy hedgerow boundary strip’ to satisfy the minimum requirements of the legislation were established with low-lying grassy cover before the introduction of the legislation in July 2005. The implications of this research for the development of automated classification methods for field scale agricultural mapping are discussed.     

Using housing estates as conservation tools: A case study in KwaZulu-Natal, South Africa

Increasing transformation and fragmentation of rural landscapes for economic reasons is causing concern to conservationists worldwide. With this trend likely to continue, perhaps conservation agencies and development corporations need to co-operate and plan housing developments that are environmentally and ecologically sustainable and can serve as refuges for endangered species. In KwaZulu-Natal, South Africa, grasslands are particularly threatened by land transformation for housing developments. A case study is presented of a housing development, Wedgewood Estate in KwaZulu-Natal that has been developed and managed for conserving grassland habitat and associated species, particularly the endangered oribi (Ourebia ourebi). Feedback from the Estate's managers about the development and ecological impact were obtained. Wedgewood is an example of the viability of housing estates as refuges for endangered species and shows that the density and placement of housing and management of the natural habitat are important. It emphasizes the need for reviewing the types and amount of housing development, management of natural habitat, and the rules and regulations they put in place to assure the integrity of the conservancy is preserved. This case study also shows the potential of such ecologically sensitive housing developments as sources of surplus game for translocation, especially in the case of endangered species such as oribi.     

Is there the will to manage fisheries at a local level in the European Union? A case study from Shetland

The failure of the command and control approach to fisheries management has encouraged governments to look for new ways of balancing the requirement to conserve fish stocks and yet maintain a flow of benefits that will meet economic and social targets. In the quest to establish a system for sustaining production in the Common Pond, the European Union (EU) has begun to investigate alternatives to the current management system. This research paper examines the problems associated with the current management regime operating in the EU in the light of alternatives for managing the fisheries. The research seeks to establish whether, given the serious problems confronting the EU's fishing industries, fishermen would be prepared to accept change and offer their ideas and support to develop an alternative management system. The research draws on the opinions of fishermen from Shetland and discusses the findings gained from interviewing key informants in conjunction with the results of an opinion survey of skippers and boat owners.     

Effect of abutment modeling on the seismic response of bridge structures

Abutment behavior significantly influences the seismic response of certain bridge structures. Specifically in the case of short bridges with relatively stiff superstructures typical of highway overpasses, embankment mobilization and inelastic behavior of the soil material under high shear deformation levels dominate the response of the bridge and its column bents. This paper investigates the sensitivity of bridge seismic response with respect to three different abutment modeling approaches. The abutment modeling approaches are based on three increasing levels of complexity that attempt to capture the critical components and modes of abutment response without the need to generate continuum models of the embankment, approach, and abutment foundations. Six existing reinforced concrete bridge structures, typical of Ordinary Bridges in California, are selected for the analysis. Nonlinear models of the bridges are developed in OpenSees. Three abutment model types of increasing complexity are developed for each bridge, denoted as roller, simplified, and spring abutments. The roller model contains only single-point constraints. The spring model contains discrete representations of backfill, bearing pad, shear key, and back wall behavior. The simplified model is a compromise between the efficient roller model and the comprehensive spring model. Modal, pushover, and nonlinear dynamic time history analyses are conducted for the six bridges using the three abutment models for each bridge. Comparisons of the analysis results show major differences in mode shapes and periods, ultimate base shear strength, as well as peak displacements of the column top obtained due to dynamic excitation. The adequacy of the three abutment models used in the study to realistically represent all major resistance mechanisms and components of the abutments, including an accurate estimation of their mass, stiffness, and nonlinear hysteretic behavior, is evaluated. Recommendations for abutment modeling are made.     

Upper Ocean Temperatures Hit Record High in 2020

The long-term warming of the ocean is a critical indicator of both the past and present state of the climate system. It also provides insights about the changes to come, owing to the persistence of both decadal variations and secular trends,which the ocean records extremely well(Hansen et al., 2011;IPCC, 2013;Rhein et al., 2013;Trenberth et al., 2016;Abram et al., 2019).     

Oxygen and sulfur isotope systematics of sulfate produced by bacterial and abiotic oxidation of pyrite

To better understand reaction pathways of pyrite oxidation and biogeochemical controls on δ¹⁸O and δ³⁴S values of the generated sulfate in acid mine drainage (AMD) and other natural environments, we conducted a series of pyrite oxidation experiments in the laboratory. Our biological and abiotic experiments were conducted under aerobic conditions by using O₂ as an oxidizing agent and under anaerobic conditions by using dissolved Fe(III)_aq as an oxidant with varying δ¹⁸O_H2O values in the presence and absence of Acidithiobacillus ferrooxidans. In addition, aerobic biological experiments were designed as short- and long-term experiments where the final pH was controlled at ∼2.7 and 2.2, respectively. Due to the slower kinetics of abiotic sulfide oxidation, the aerobic abiotic experiments were only conducted as long term with a final pH of ∼2.7. The δ³⁴S_SO4 values from both the biological and abiotic anaerobic experiments indicated a small but significant sulfur isotope fractionation (∼−0.7‰) in contrast to no significant fractionation observed from any of the aerobic experiments. Relative percentages of the incorporation of water-derived oxygen and dissolved oxygen (O₂) to sulfate were estimated, in addition to the oxygen isotope fractionation between sulfate and water, and dissolved oxygen. As expected, during the biological and abiotic anaerobic experiments all of the sulfate oxygen was derived from water. The percentage incorporation of water-derived oxygen into sulfate during the oxidation experiments by O₂ varied with longer incubation and lower pH, but not due to the presence or absence of bacteria. These percentages were estimated as 85%, 92% and 87% from the short-term biological, long-term biological and abiotic control experiments, respectively. An oxygen isotope fractionation effect between sulfate and water (ε¹⁸O_SO4-H2O) of ∼3.5‰ was determined for the anaerobic (biological and abiotic) experiments. This measured value was then used to estimate the oxygen isotope fractionation effects between sulfate and dissolved oxygen in the aerobic experiments which were −10.0‰, −10.8‰, and −9.8‰ for the short-term biological, long-term biological and abiotic control experiments, respectively. Based on the similarity between δ¹⁸O_SO4 values in the biological and abiotic experiments, it is suggested that δ¹⁸O_SO4 values cannot be used to distinguish biological and abiotic mechanisms of pyrite oxidation. The results presented here suggest that Fe(III)_aq is the primary oxidant for pyrite at pH < 3, even in the presence of dissolved oxygen, and that the main oxygen source of sulfate is water-oxygen under both aerobic and anaerobic conditions.     

Surface structure effects on direct reduction of iron oxides by Shewanella oneidensis

The atomic and electronic structure of mineral surfaces affects many environmentally important processes such as adsorption phenomena. They are however rarely considered relevant to dissimilatory bacterial reduction of iron and manganese minerals. In this regard, surface area and thermodynamics are more commonly considered. Here we take a first step towards understanding the nature of the influence of mineral surface structure upon the rate of electron transfer from Shewanella oneidensis strain MR-1 outer membrane proteins to the mineral surface and the subsequent effect upon cell “activity.” Cell accumulation has been used as a proxy for cell activity at three iron oxide single crystal faces; hematite (001), magnetite (111) and magnetite (100). Clear differences in cell accumulation at, and release from the surfaces are observed, with significantly more cells accumulating at hematite (001) compared to either magnetite face whilst relatively more cells are released into the overlying aqueous phase from the two magnetite faces than hematite. Modeling of the electron transfer process to the different mineral surfaces from a decaheme (protoporphyrin rings containing a central hexacoordinate iron atom), outer membrane-bound cytochrome of S. oneidensis has been accomplished by employing both Marcus and ab initio density functional theories. The resultant model of electron transfer to the three oxide faces predicts that over the entire range of expected electron transfer distances the highest electron transfer rates occur at the hematite (001) surface, mirroring the observed cell accumulation data. Electron transfer rates to either of the two magnetite surfaces are slower, with magnetite (111) slower than hematite (001) by approximately two orders of magnitude. A lack of knowledge regarding the structural details of the heme-mineral interface, especially in regards to atomic distances and relative orientations of hemes and surface iron atoms and the conformation of the protein envelope, precludes a more thorough analysis. However, the results of the modeling concur with the empirical observation that mineral surface structure has a clear influence on mineral surface-associated cell activity. Thus surface structure effects must be accounted for in future studies of cell-mineral interactions.