Morphological beak differences of loliginid squid,Uroteuthis chinensis and Uroteuthis edulis,in the northern South China Sea

The mitre squid(U roteuthis chinensis) and the swordtip squid( U. edulis) are Indo-Pacific cephalopod species that are abundant in the western Pacific Ocean. They are currently exploited in the East and South China Seas and make up a significant portion of the Chinese neritic squid catch. Beaks, the feeding organs of squid, are important for individual size and biomass estimation because of their high resistance to degradation in predator stomachs and consistent dimensions. In this study, 104 U. chinensis and 143 U. edulis individuals were sampled from northern South China Sea with mantle length from 70 to 260 mm and 96 to 284 mm, respectively. The results indicated that morphological beak values were greater for U. edulis, compared to U. chinensis, for upper hood length(UHL), upper crest length(UCL), upper lateral wall length(ULWL), lower crest length(LCL), and lower lateral wall length(LLWL). According to principal component analysis, UHL/ML, UCL/ML, ULWL/ML, LCL/ML, LLWL/ML and LWL/ML could represent the characteristics of beaks for U. chinensis, while UHL/ML, UCL/ML, ULWL/ML, LHL/ML, LCL/ML and LLWL/ML could represent it for U. edulis. According to Akaike's information criterion(AIC) values, a power function was the most suitable model for U. chinensis, while a linear function was the most suitable model for U. edulis. The beak variable-mantle length ratio(beak variable/mantle length) declined with the increasing of mantle length and declined sharply at the early stage of growth in both beaks and species. The ratio changed quickly after achieving the mantle length of 140 mm for U. chinensis, while the ratio changed quickly after 170 mm for U. edulis. Beaks in both species experienced sharper changes through maturity stage I to II than other maturity stages. This study gives us basic beak morphology information for U. chinensis and U. edulis in the East and South China Seas. Geometric morphological methods combined with dietary analysis should be used in the future.     

Estimating sand concentrations using ADCP-based acoustic inversion in a large fluvial system characterized by bi-modal suspended-sediment distributions

Quantifying sediment flux within rivers is a challenge for many disciplines due, mainly, to difficulties inherent to traditional sediment sampling methods. These methods are operationally complex, high cost, and high risk. Additionally, the resulting data provide a low spatial and temporal resolution estimate of the total sediment flux, which has impeded advances in the understanding of the hydro-geomorphic characteristics of rivers. Acoustic technologies have been recognized as a leading tool for increasing the resolution of sediment data by relating their echo intensity level measurements to suspended sediment. Further effort is required to robustly test and develop these techniques across a wide range of conditions found in natural river systems. This article aims to evaluate the application of acoustic inversion techniques using commercially available, down-looking acoustic Doppler current profilers (ADCPs) in quantifying suspended sediment in a large sand bed river with varying bi-modal particle size distributions, wash load and suspended-sand ratios, and water stages. To achieve this objective, suspended sediment was physically sampled along the Paraná River, Argentina, under various hydro-sedimentological regimes. Two ADCPs emitting different sound frequencies were used to simultaneously profile echo intensity level within the water column. Using the sonar equation, calibrations were determined between suspended-sand concentrations and acoustic backscatter to solve the inverse problem. The study also analyzed the roles played by each term of the sonar equation, such as ADCP frequency, power supply, instrument constants, and particle size distributions typically found in sand bed rivers, on sediment attenuation and backscatter. Calibrations were successfully developed between corrected backscatter and suspended-sand concentrations for all sites and ADCP frequencies, resulting in mean suspended-sand concentration estimates within about 40% of the mean sampled concentrations. Noise values, calculated using the sonar equation and sediment sample characteristics, were fairly constant across evaluations, suggesting that they could be applied to other sand bed rivers. © 2018 John Wiley & Sons, Ltd.     

Tracing the temporal evolution of soil redistribution rates in an agricultural landscape using 239+240Pu and 10Be

Two principal groups of processes shape mass fluxes from and into a soil: vertical profile development and lateral soil redistribution. Periods having predominantly progressive soil forming processes (soil profile development) alternate with periods having predominantly regressive processes (erosion). As a result, short-term soil redistribution – years to decades – can differ substantially from long-term soil redistribution; i.e. centuries to millennia. However, the quantification of these processes is difficult and consequently their rates are poorly understood. To assess the competing roles of erosion and deposition we determined short- and long-term soil redistribution rates in a formerly glaciated area of the Uckermark, northeast Germany. We compared short-term erosion or accumulation rates using plutonium-239 and -240 (^239+240Pu) and long-term rates using both in situ and meteoric cosmogenic beryllium-10 (¹⁰Be). Three characteristic process domains have been analysed in detail: a flat landscape position having no erosion/deposition, an erosion-dominated mid-slope, and a deposition-dominated lower-slope site. We show that the short-term mass erosion and accumulation rates are about one order of magnitude higher than long-term redistribution rates. Both, in situ and meteoric ¹⁰Be provide comparable results. Depth functions, and therefore not only an average value of the topsoil, give the most meaningful rates. The long-term soil redistribution rates were in the range of −2.1 t ha^-1 yr^-1 (erosion) and +0.26 t ha^-1 yr^-1 (accumulation) whereas the short-term erosion rates indicated strong erosion of up to 25 t ha^-1 yr^-1 and accumulation of 7.6 t ha^-1 yr^-1. Our multi-isotope method identifies periods of erosion and deposition, confirming the ‘time-split approach’ of distinct different phases (progressive/regressive) in soil evolution. With such an approach, temporally-changing processes can be disentangled, which allows the identification of both the dimensions of and the increase in soil erosion due to human influence. © 2019 John Wiley & Sons, Ltd.     

Climate and relief-induced controls on the temporal variability of denudation rates in a granitic upland

How soil erosion rates evolved over the last about 100 ka and how they relate to environmental and climate variability is largely unknown. This is due to a lack of suitable archives that help to trace this evolution. We determined in situ cosmogenic beryllium-10 (¹⁰Be) along vertical landforms (tors, boulders and scarps) on the Sila Massif to unravel their local exhumation patterns to develop a surface denudation model over millennia. Due to the physical resistance of tors, their rate of exhumation may be used to derive surface and, thus, soil denudation rates over time. We derived soil denudation rates that varied in the range 0–0.40 mm yr^-1. The investigated boulders, however, appear to have experienced repositioning processes about ~20–25 ka bp and were therefore a less reliable archive. The scarps of the Sila upland showed a rapid bedrock exposure within the last 8–15 ka. Overall, the denudation rates increased steadily after 75 ka bp but remained low until about 17 ka bp . The exhumation rates indicate a denudation pulse that occurred about 17–5 ka bp . Since then the rates have continuously decreased. We identify three key factors for these developments – climate, topography and vegetation. Between 75 and 17 ka bp , climate was colder and drier than today. The rapid changes towards warmer and humid conditions at the Pleistocene–Holocene transition apparently increased denudation rates. A denser vegetation cover with time counteracted denudation. Topography also determined the extent of denudation rates in the upland regime. On slopes, denudation rates were generally higher than on planar surfaces. By determining the exhumation rates of tors and scarps, soil erosion rates could be determined over long timescales and be related to topography and particularly to climate. This is key for understanding geomorphic dynamics under current environmental settings and future climate change. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.     

Common origin for De Geer moraines of variable composition in Raudvassdalen,northern Norway

The study of De Geer moraines in Raudvassdalen shows that most De Geer moraines are likely to have a common origin at the grounding line of glaciers despite variability in composition of the ridges. Pebble fabric, grain‐size analysis and structures within exposures of De Geer moraines in the Raudvassdalen area, with compositions ranging from mostly till to mostly sorted sediment, indicate that the ridges all formed at the grounding line of a tidewater glacier by common processes: deposition of sorted sediments beyond the grounding line followed by deformation of pre‐existing sediments and deposition of till as the glacier overrode the ridges. The compositional variation of the ridges is probably related to the position of the section studied relative to the location of the outlet of subglacial streams. Ridges composed entirely of till form at locations remote from the outlet of subglacial streams, and ridges with a component of sorted sediments form in closer proximity to these streams. This unifying theory of De Geer moraine formation, along with theoretical and geological evidence showing that there are limited physical conditions where basal crevasses can form, suggests that the number of De Geer moraines interpreted to have formed in basal crevasses is probably unrealistic. Copyright © 2000 John Wiley & Sons, Ltd.     

Modelling the Gravitational Effects of Random Underground Density Variations

Mathematical Geosciences - A mathematical model for small-scale spatial variations in gravity above the Earth’s surface is presented. Gravity variations are treated as a Gaussian random...     

A comparison of biological trends from four marine ecosystems: Synchronies, differences, and commonalities

Major features of four marine ecosystems were analyzed based on a broad range of fisheries-associated datasets and a suite of oceanographic surveys. The ecosystems analyzed included the Gulf of Maine/Georges Bank in the Northwest Atlantic Ocean, the Norwegian/Barents Seas in the Northeast Atlantic Ocean, and the eastern Bering Sea and the Gulf of Alaska in the Northeast Pacific Ocean. We examined survey trends in major fish abundances, total system fish biomass, and zooplankton biomasses. We standardized each time series and examined trends and anomalies over time, using both time series and cross-correlational statistical methods. We compared dynamics of functionally analogous species from each of these four ecosystems. Major commonalities among ecosystems included a relatively stable amount of total fish biomass and the importance of large calanoid copepods, small pelagic fishes and gadids. Some of the changes in these components were synchronous across ecosystems. Major differences between ecosystems included gradients in the magnitude of total fish biomass, commercial fish biomass, and the timing of major detected events. This work demonstrates the value of comparative analysis across a wide range of marine ecosystems, suggestive of very few but none-the-less detectable common features across all northern hemisphere ocean systems.     

Sailfish (Istiophorus platypterus) spawning and larval environment in a Florida Current frontal eddy

Fronts and eddies are widely hypothesized to be critical spawning habitat for large pelagic fishes, due to increased larval and/or adult feeding opportunities at these features. We examined sailfish (Istiophorus platypterus) spawning around a cyclonic, submesoscale (∼13 × 7 km) Florida Current frontal eddy. The temporal progression of eddy dynamics over a 65 h period was determined using ocean color satellite imagery, continuous surface measurements along the cruise track, and non-linear least-squares fitting of the positions of three drifters deployed within the eddy. A peak in larval sailfish densities (n = 2435, stations = 49), composed primarily of yolk-sac and first-feeding larvae, occurred at the eddy frontal zone. A majority of these larvae were estimated to have been spawned during the formation of the eddy. A comparison between the distribution of similar-age sailfish and scombrid larvae indicated that the peak in larval sailfish density likely resulted from spawning directly at the front, rather than transport by convergent flow. The first-feeding prey items of larval sailfish (Farranula and Corycaeus copepods) were most abundant at the frontal zone and to a lesser extent inside the eddy. Egg distributions were used to indirectly assess the distribution of adult sailfish prey items. Euthynnus alleteratus and Auxis spp. eggs were in highest abundance outside the eddy, while the eggs of small carangids were in highest abundance at the eddy frontal zone. Overall, this study indicates that sailfish spawn at small-scale oceanographic features that provide a favorable feeding environment for their larvae and potentially also for the adults.     

基于半仿真实验系统的调谐质量阻尼器等效阻尼力测量

为了研究调谐质量阻尼器(tuned mass damper,TMD)在海洋平台冰激振动中的减振效果,提出一种基于半仿真实验系统的TMD等效阻尼力测量方法,利用该系统可以直接测试结构安装TMD装置时产生的作用力.介绍该实验系统的测试原理及等效阻尼力的测量方法,并在正弦位移输入下,对TMD装置进行了测试,比较等效阻尼力的实测值与计算值,结果证明利用该系统可以测量得到TMD的等效阻尼力.