Preserving the unpreservable: a lost world rediscovered at Christian Malford, UK

The small village of Christian Malford, Wiltshire (UK) is known to palaeontologists the world over because of the chance discovery of an astonishing fossil bonanza in the mid-nineteenth century. Pits in the Jurassic Oxford Clay yielded thousands of specimens of exquisitely preserved ammonites, fish and crustaceans, but became most famous for squid-like cephalopods and belemnites (collectively termed coleoids) with fossilized soft-parts. The precise location of the find has remained obscure, until now, and a new attempt is underway to understand the ancient environment that triggered this unusual preservation.     

Meteorite falls in China and some related human casualty events

Abstract— Statistics of witnessed and recovered meteorite falls found in Chinese historical texts for the period from 700 B.C. to A.D. 1920 are presented. Several notable features can be seen in the binned distribution as a function of time. An apparent decrease in the number of meteorite reports in the 18th century is observed. An excess of observed meteorite falls in the period from 1840 to 1880 seems to correspond to a similar excess in European data. A x² probability test suggests that the association between the two data sets are real. Records of human casualties and structural damage resulting from meteorite falls are also given. A calculation based on the number of casualty events in the Chinese meteorite records suggests that the probability of a meteorite striking a human is far greater than previous estimates. However, it is difficult to verify the accuracy of the reported casualty events.     

Secondary alteration of the impactite and mineralization in the basal Tertiary sequence,Yaxcopoil‐1, Chicxulub impact crater,Mexico

Abstract The 65 Ma Chicxulub impact crater formed in the shallow coastal marine shelf of the Yucatán Platform in Mexico. Impacts into water‐rich environments provide heat and geological structures that generate and focus sub‐seafloor convective hydrothermal systems. Core from the Yaxcopoil‐1 (Yax‐1) hole, drilled by the Chicxulub Scientific Drilling Project (CSDP), allowed testing for the presence of an impact‐induced hydrothermal system by: a) characterizing the secondary alteration of the 100 m‐thick impactite sequence; and b) testing for a chemical input into the lower Tertiary sediments that would reflect aquagene hydrothermal plume deposition. Interaction of the Yax‐1 impactites with seawater is evident through redeposition of the suevites (unit 1), secondary alteration mineral assemblages, and the subaqueous depositional environment for the lower Tertiary carbonates immediately overlying the impactites. The least‐altered silicate melt composition intersected in Yax‐1 is that of a calc‐alkaline basaltic andesite with 53.4–56 wt% SiO_{2(volatile‐free)}. The primary mineralogy consists of fine microlites of diopside, plagioclase (mainly Ab 47), ternary feldspar (Ab 37 to 77), and trace apatite, titanite, and zircon. The overprinting alteration mineral assemblage is characterized by Mg‐saponite, K‐montmorillonite, celadonite, K‐feldspar, albite, Fe‐oxides, and late Ca and Mg carbonates. Mg and K metasomatism resulted from seawater interaction with the suevitic rocks producing smectite‐K‐feldspar assemblages in the absence of any mixed layer clay minerals, illite, or chlorite. Rare pyrite, sphalerite, galena, and chalcopyrite occur near the base of the impactites. These secondary alteration minerals formed by low temperature (0–150°C) oxidation and fixation of alkalis due to the interaction of glass‐rich suevite with down‐welling seawater in the outer annular trough intersected at Yax‐1. The alteration represents a cold, Mg‐K‐rich seawater recharge zone, possibly recharging higher temperature hydrothermal activity proposed in the central impact basin. Hydrothermal metal input into the Tertiary ocean is shown by elevated Ni, Ag, Au, Bi, and Te concentrations in marcasite and Cd and Ga in sphalerite in the basal 25 m of the Tertiary carbonates in Yax‐1. The lower Tertiary trace element signature reflects hydrothermal metal remobilization from a mafic source rock and is indicative of hydrothermal venting of evolved seawater into the Tertiary ocean from an impact‐generated hydrothermal convective system.     

H2O2 production by high-energy electrons on icy satellites as a function of surface temperature and electron flux

Chemistry on the icy surface of Europa is heavily influenced by the incident energetic particle flux from the jovian magnetosphere. The majority (>75%) of this energy is in the form of high energy electrons (extending to >10 MeV). We have simulated the electron irradiation environment of Europa with a vacuum system containing a high-energy electron gun for irradiation of ice samples formed on a gold mirror cooled with a cryostat. Pure water films of ∼2.6 μm thickness were grown at 100 K and then either cooled (to 80 K), warmed (to 120 K) or left at 100 K and subsequently irradiated with 10 keV electrons. The production of hydrogen peroxide (H₂O₂) was monitored by observation of the 2850 cm⁻¹ (3.5 μm) band. Equilibrium concentrations of H₂O₂, in units of percent by number H₂O₂ relative to water, were found to be 0.043% (80 K), 0.029% (100 K), and 0.0063% (120 K). These values are 33%, 22%, and 5%, respectively, that of the reported surface concentration on the leading hemisphere of Europa (Carlson, R.W., Anderson, M.S., Johnson, R.E., Smythe, W.D., Hendrix, A.R., Barth, C.A., et al. [1999]. Science 283(5410), 2062-2064) and less than the equilibrium concentrations formed by ion irradiation. In addition to the ice film temperature, the current of electrons was varied between different experiments to determine the production and destruction of H₂O₂ as a function of both electron flux and ice temperature. Variation in current was found to have little effect on the results other than accelerating arrival at radiolytic equilibrium.     

Factors affecting the elimination of PCBs in the marine copepod Acartia tonsa

The effects of feeding, egg laying, and fecal pellet production on the elimination of polychlorinated biphenyls (PCBs) from the marine copepod Acartia tonsa were studied in a series of experiments. Copepods were exposed to ¹⁴C-labelled Aroclor 1254 and allowed to depurate in clean seawater. Copepods fed during depuration eliminated PCBs more rapidly than unfed copepods whether or not the original PCB exposure medium had contained food. Both eggs and fecal pellets contained PCBs during depuration, with the weight specific concentration of PCB in the eggs (up to 407 ppm, dry weight) exceeding four times that in the females that produced them. Female copepods eliminated PCBs twice as rapidly as males, indicating that egg production is an important route for PCB elimination.     

The clearing of the Illawarra rainforests: problems in reconstructing Pre‐European vegetation patterns

Historical information is used in conjunction with a detailed knowledge of the environment and vegetation types of the Illawarra district to reconstruct the original extent of rainforest in the district. While most of the literature and popular opinion suggest that much of the Illawarra was covered in rainforest vegetation, historical accounts and the patterns of existing vegetation clearly indicate that the rainforests were much less extensive than this. Based on historical evidence, the present occurrence of rainforest and other vegetation and a detailed knowledge of the environmental requirements for local rainforest development, three major concentrations of rainforest have been delineated. Termed the ‘Illawarra’, ‘Yarrawa’ and ‘Berkeley’ brushes, these areas covered 12,000, 2,450 and 1,600 hectares, respectively. These brushes represented 70 per cent of the 23,000 ha of rainforest estimated to have occurred in the district before European settlement. Historical information is a valuable tool in ecological research, but a detailed knowledge of the interactions of the vegetation and environment are also required to reconstruct original vegetation patterns.     

Radiation properties of pulsar magnetospheres: observation,theory, and experiment

In the three decades since their discovery, the accumulated body of observational data from pulsar sources puts constraints on models that seek to explain their periodic radiation. This paper reviews this data, reports on a VLA search for haloes predicted by an early model, and reinvestigates a magnetospheric disk-field-aligned-current transmission line system as the origin of the observed radiation, with external wave excitation by as yet an unexplained source. Three dimensional, fully electromagnetic particle-in-cell simulations of the pulsar surface and magnetosphere are used to explore the waveshape and polarization properties of the observed radiation.     

Segmentation and kinematics of the North America‐Caribbean plate boundary offshore Hispaniola

We explored the submarine portions of the Enriquillo–Plantain Garden Fault zone (EPGFZ) and the Septentrional–Oriente Fault zone (SOFZ) along the Northern Caribbean plate boundary using high‐resolution multibeam echo‐sounding and shallow seismic reflection. The bathymetric data shed light on poorly documented or previously unknown submarine fault zones running over 200 km between Haiti and Jamaica (EPGFZ) and 300 km between the Dominican Republic and Cuba (SOFZ). The primary plate‐boundary structures are a series of strike‐slip fault segments associated with pressure ridges, restraining bends, step overs and dogleg offsets indicating very active tectonics. Several distinct segments 50–100 km long cut across pre‐existing structures inherited from former tectonic regimes or bypass recent morphologies formed under the current strike‐slip regime. Along the most recent trace of the SOFZ, we measured a strike‐slip offset of 16.5 km, which indicates steady activity for the past ~1.8 Ma if its current GPS‐derived motion of 9.8 ± 2 mm a^?1 has remained stable during the entire Quaternary.     

Shock metamorphic history of >4 Ga Apollo 14 and 15 zircons

During impact events, zircons develop a wide range of shock metamorphic features that depend on the pressure and temperature conditions experienced by the zircon. These conditions vary with original distance from impact center and whether the zircon grains are incorporated into ejecta or remain within the target crust. We have employed the range of shock metamorphic features preserved in >4 Ga lunar zircons separated from Apollo 14 and 15 breccias and soils in order to gain insights into the impact shock histories of these areas of the Moon. We report microstructural characteristics of 31 zircons analyzed using electron beam methods including electron backscatter pattern (EBSP) and diffraction (EBSD). The major results of this survey are as follows. (1) The abundance of curviplanar features hosting secondary impact melt inclusions suggests that most of the zircons have experienced shock pressures between 3 and 20 GPa; (2) the scarcity of recrystallization or decomposition textures and the absence of the high‐pressure polymorph, reidite, suggests that few grains have been shocked to over 40 GPa or heated above 1000 °C in ejecta settings; (3) one grain exhibits narrow, arc‐shaped bands of twinned zircon, which map out as spherical shells, and represent a novel shock microstructure. Overall, most of the Apollo 14 and 15 zircons exhibit shock features similar to those of terrestrial zircon grains originating from continental crust below large (~200 km) impact craters (e.g., Vredefort impact basin), suggesting derivation from central uplifts or uplifted rims of large basins or craters on the Moon and not high‐temperature and ‐pressure ejecta deposits.