An eddy-driven abyssal circulation in a bowl-shaped basin due to deep water formation

Numerical experiments were performed to investigate the effects of eddies generated in deep water formation processes on an abyssal circulation in a closed bowl-shaped basin. Two sets of experiments were performed. One set was eddy-restricted experiments in which only a volume-driven (upwelling-driven) circulation was simulated and the other set was eddy-permitted experiments in which both a volume-driven circulation and an eddy-driven circulation were simulated. In the two layer experiment where the lower layer water is formed, a mean along-slope current is formed in the lower layer for both the eddy-restricted and eddy-permitted experiments. The direction of the current was not unique in the eddy-restricted experiment, but it was cyclonic in the eddy-permitted experiment. In the three layer experiments where water of the intermediate layer is formed, the mean along-slope current in the lowest layer is negligibly small in the eddy-restricted experiment, while it is large and cyclonic in the eddy-permitted experiment. The driving forcings of the eddy-driven circulation are quantified in terms of eddy fluxes of relative vorticity (Reynolds stress) and layer thickness (bolus velocity). These terms increase as the volume of the newly formed water increases, but they do not change greatly with the slope height. The magnitude of these terms changes with the slope width, but the sum of these terms does not vary greatly. As a result, the intensity of the eddy-driven circulation depends primarily on the volume of newly formed water. These dependences of eddy fluxes were interpreted using downgradient diffusion of potential vorticity.     

Quasi-static analysis of strike fault growth in layered media

We study the effects of structural inhomogeneity on the quasi-static growth of strike-slip faults. A layered medium is considered, made up of an upper layer bounded by a free surface and welded to a lower half-space with different elastic property. Mode III crack is employed as a mathematical model of strike-slip fault, which is nucleated in the lower half-space and then propagates towards the interface. We adopt FEM-β, newly proposed analysis method for failure, to simulate the quasi-statistic crack growth governed by the stress distribution in layered media. Our results show that along planar traces across interfaces a compliant upper layer has significant effects on promoting/suppressing crack growth before/after its extension into the layer and vice versa for a rigid one. This proposes a possibility that surface breaks due to strike-slip faulting could be arrested by deposit layers at the topmost part of the Earth's crust.     

Evolution processes of Ordovician–Devonian arc system in the South‐Kitakami Massif and its relevance to the Ordovician ophiolite pulse

The South Kitakami Massif is one of the oldest geological domains in Japan having Silurian strata with acidic pyroclastic rocks and Ordovician–Silurian granodiorite–tonalite basement, suggesting that it was matured enough to develop acidic volcanisms in the Silurian period. On the northern and western margin of the South Kitakami Massif, an Ordovician arc ophiolite (Hayachine–Miyamori Ophiolite) and high‐pressure and low‐temperature metamorphic rocks (Motai metamorphic rocks) exhumed sometime in the Ordovician–Devonian periods are distributed. Chronological, geological, and petrochemical studies on the Hayachine–Miyamori Ophiolite, Motai metamorphic rocks, and other early Paleozoic geological units of the South Kitakami Massif are reviewed for reconstruction of the South Kitakami arc system during Ordovician to Devonian times with supplementary new data. The reconstruction suggests a change in the convergence polarity from eastward‐ to westward‐dipping subduction sometime before the Late Devonian period. The Hayachine–Miyamori Ophiolite was developed above the eastward‐dipping subduction through three distinctive stages. Two separate stages of overriding plate extension inducing decompressional melting with minor involvement of slab‐derived fluid occurred before and after a stage of melting under strong influence of slab‐derived fluids. The first overriding plate extension took place in the back‐arc side forming a back‐arc basin. The second one took place immediately before the ophiolite exhumation and near the fore‐arc region. We postulate that the second decompressional melting was triggered by slab breakoff, which was preceded by slab rollback inducing trench‐parallel wedge mantle flow and non‐steady fluid and heat transport leaving exceptionally hydrous residual mantle. The formation history of the Hayachine–Miyamori Ophiolite implies that weaker plate coupling may provide preferential conditions for exhumation of very hydrous mantle. Very hydrous peridotites involved in arc magmatism have not yet been discovered except for in the Cambrian–Ordovician periods, suggesting its implications for global geodynamics, such as the thermal state and water circulation in the mantle.     

A 60-year record of rainfall from the sediments of Jinheung Pond,Jeongeup, Korea

This paper describes mean grain-size data from the ¹³⁷Cs- and ²¹⁰Pb-dated sediment core BS-3 (33-cm long) recovered from Jinheung Pond, located in the southwestern part of the Korean Peninsula. Grain-size analysis of the Jinheung Pond sediments shows a clear signal for changes in annual precipitation over the past 60 years. Instrumental records of annual precipitation (AP) and the annual summation of the precipitation of >50 mm per day (AP50), which reflects the energy available for sediment transport, correlate well with the mean grain-size distributions measured in the core. The most plausible mechanism for this response in mean grain size is variations in the annual amount and intensity of precipitation. Heavy precipitation enhances soil erosion over the catchment area and increases the transport capacity of streams and rivers. Thus, coarser mean grain size should reflect higher precipitation, and smaller mean grain size should reflect lower rainfall. In the data from core BS-3, however, grain-size peaks attributed to increased annual precipitation are not prominent. This is because a dam prevents removal of fine particles from the pond via the outflow. Therefore, the mean grain-size value represents somewhat larger sediments together with fine clays. The results of this study show that sediments of dammed lakes and ponds are well suited for high-resolution environmental investigations, especially for records of changes in precipitation over time.     

Late Pleistocene and Holocene vegetation and climate records from Lake Kotokel, central Baikal region

Climatically driven Late Pleistocene and Holocene vegetation changes were reconstructed based on pollen records from the sediments of Lake Kotokel and Cheremushka Bog, located on the eastern shore of Lake Baikal. The described paleoenvironmental record has higher resolution than records collected from Lake Baikal and unites individual events identified in prior studies of bottom and onshore cores. Remarkable shifts in landscapes and expansions of index plants are as follows. Forest tundra and/or forest steppe landscape with birch, spruce, Artemisia, and Poaceae prevailed at ca. 50–25 ¹⁴C kyr BP. Tundra and/or steppe vegetation dominated by Artemisia and Poaceae was typical for the Last Glacial Maximum. The expansion of shrub birch and willow occurred at ca. 15.5 ¹⁴C kyr BP. Two peaks of spruce expansion at ca. 47.5–42.4 ¹⁴C kyr BP (Karginian time) and at ca. 14.5–13 ka (Bølling-Allerød warm intervals) suggest that the condition were more humid than today. A slight increase in Artemisia at ca. 11–10.5 ¹⁴C kyr BP (13–12 ka) was indicative of the Younger Dryas event. An expansion of birch forests with fir at ca. 12–6.4 ka suggests higher humidity. The currently dominant Scots and Siberian pine forests with birch expanded since 6.4 ka.     

The 21 May 2003 Tsunami in the Western Mediterranean Sea: Statistical and Wavelet Analyses

We report the statistical and wavelet analyses of the 21 May 2003 tsunami produced by an M _w 6.8–6.9 thrust earthquake in the western Mediterranean Sea using 19 tide gauge records. The largest trough-to-crest wave height was 196 cm recorded at the Sant Antoni station in the lee of the incoming tsunami wave. Except at one station, the first wave was not the largest wave at all the analyzed stations, and the largest wave arrived several hours after the first arrival. In addition, the tsunami waves persisted for more than 1 day at most stations. As the spectra of coastal tide gauge stations are strongly influenced by topographic features, special care was taken here while interpreting the results of spectral and wavelet analysis. Our wavelet analysis shows that only a peak at around 23 min is persistent for long duration, and other peaks at 14, 30, 45, and 60 min appeared at short durations. The 23-min signal is possibly associated with the width of the source fault whereas the fault length contributed to the 45-min signal. Based on these dominant periods, the tsunami source dimensions are estimated as 95 km × 45 km. The statistical and wavelet analyses performed here provide some new insights into the characteristics of the tsunami that was generated and propagated in the western Mediterranean basin.     

High-<Emphasis Type="Italic">P</Emphasis>, <Emphasis Type="Italic">T</Emphasis> phase relations in the NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> system from first principles computation

Vibrational density of states of the NaAlSi₂O₆ jadeite and NaAlSiO₄ calcium ferrite (CF)-type, and SiO₂ stishovite is calculated as a function of pressure up to 50 GPa using density functional perturbation theory. The calculated frequencies are used to determine the thermal contribution to the Helmholtz free energy within the quasi-harmonic approximation and to derive the equation of state and several thermodynamic properties of interest. A dissociation of jadeite into a mixture of a CF-type phase and stishovite is predicted to occur at 23.4 GPa and 1,800 K with a positive Clapeyron slope of 2.8 MPa/K. Elastic anisotropy for jadeite, the CF-type phase, and stishovite also computed clearly shows that stishovite and the CF-type phase are the most anisotropic and isotropic in these three phases, respectively.     

Driftwood deposition from debris flows at slit-check dams and fans

Experience shows that debris flows containing large woody debris (driftwood) can be more damaging than debris flows without driftwood. In this study, the deposition process of debris flows carrying driftwood was investigated using numerical simulations and flume experiments. Debris-flow trapping due to driftwood jamming in a slit-check dam was also investigated. A numerical model was developed with an interacting combination of Eulerian expression of the debris flow and Lagrangian expression of the driftwood, in which the fluctuating coordinates and rotation of the driftwood were treated stochastically. The calculated shapes and thicknesses of a debris-flow fan and the positions and orientations of the deposited driftwood on a debris-flow fan were consistent with experimental flume results. The jamming of driftwood in a slit-check dam was evaluated based on geometry and probability. The simulated results of outflow discharge and the proportion of driftwood passed through the slit-check dam also agreed with the experimental results.     

Chemical characteristics of chromian spinel in plutonic rocks: Implications for deep magma processes and discrimination of tectonic setting

We summarize chemical characteristics of chromian spinels from ultramafic to mafic plutonic rocks (lherzolites, harzburgites, dunites, wehrlites, troctolites, olivine gabbros) with regard to three tectonic settings (mid‐ocean ridge, arc, oceanic hotspot). The chemical range of spinels is distinguishable between the three settings in terms of Cr# (= Cr/(Cr + Al) atomic ratio) and Ti content. The relationships are almost parallel with those of chromian spinels in volcanic rocks, but the Ti content is slightly lower in plutonics than in volcanics at a given tectonic environment. The Cr# of spinels in plutonic rocks is highly diverse; its ranges overlap between the three settings, but extend to higher values (up to 0.8) in arc and oceanic hotspot environments. The Ti content of spinels in plutonics increases, for a given lithology, from the arc to oceanic hotspot settings by mid‐ocean ridge on average. This chemical diversity is consistent with that of erupted magmas from the three settings. If we systematically know the chemistry of chromian spinels from a series of plutonic rocks, we can estimate their tectonic environments of formation. The spinel chemistry is especially useful in dunitic rocks, in which chromian spinel is the only discriminating mineral. Applying this, discordant dunites cutting mantle peridotites were possibly precipitated from arc‐related magmas in the Oman ophiolite, and from an intraplate tholeiite in the Lizard ophiolite, Cornwall.     

Mixing of magmatic CO2 into volcano groundwater flow at Aso volcano assessed combining carbon and water stable isotopes

To understand deep groundwater flow systems and their interaction with CO₂ emanated from magma at depth in a volcanic edifice, deep groundwater samples were collected from hot spring wells in the Aso volcanic area for hydrogen, oxygen and carbon isotope analyses and measurements of the stable carbon isotope ratios and concentrations of dissolved inorganic carbon (DIC). Relations between the stable carbon isotope ratio (δ¹³C_DIC) and DIC concentrations of the sampled waters show that magma-derived CO₂ mixed into the deep groundwater. Furthermore, groundwaters of deeper areas, except samples from fumarolic areas, show higher δ¹³C_DIC values. The waters' stable hydrogen and oxygen isotope ratios (δD and δ¹⁸O) reflect the meteoric-water origin of that region's deep groundwater. A negative correlation was found between the altitude of the well bottom and the altitude of groundwater recharge as calculated using the equation of the recharge-water line and δD value. This applies especially in the Aso-dani area, where deeper groundwater correlates with higher recharge. Groundwater recharged at high altitude has higher δ¹³C_DIC of than groundwater recharged at low altitude, strongly suggesting that magmatic CO₂ is present to a much greater degree in deeper groundwater. These results indicate that magmatic CO₂ mixes into deeper groundwater flowing nearer the magma conduit or chamber.