Trace metal composition of and accumulation rates of sediments in the Upper Gulf of Thailand

Sediment cores and grab samples were collected in the Upper Gulf of Thailand to determine sedimentation rates and to determine if metal concentrations reflect anthropogenic inputs.Accumulation rates of sediments in the Upper Gulf measured using the ²¹⁰Pb method, appear to vary from ca. 4 to 11 mm yr^?1. Sediment budgets suggest that little of the sediment delivered to the Upper Gulf by the major rivers is ultimately transported to the Lower Gulf. Metal concentrations in Upper Gulf sediments appear to be dominantly controlled by natural inputs.     

Morphology of HCN and CN in Comet Hale-Bopp (1995 O1)

We compare images of Comet Hale-Bopp (1995 O1) in HCN and CN taken near perihelion (April 1, 1997) to determine the origin of CN in comets. We imaged the J=1→0 transition of HCN at λ=3 mm with the BIMA Array. Data from two weeks around perihelion were summed within four phase bins based on the rotational period of the comet. This increases both the signal-to-noise ratio and the u-v coverage while decreasing the smearing of the spatial features. The similarly phased narrowband CN images were taken at Lowell Observatory within the same range of dates as the HCN images. We find that there is a better correlation between HCN and CN than between HCN and the optically dominant dust. If the CN in jets does have a dust source it would have to have a very low albedo and/or small particle size. The production rates are consistent with HCN being a primary parent of CN, although there are discrepancies between the HCN destruction scalelength and the CN production scalelength which we discuss.     

Methane Abundance on Titan, Measured by the Space Telescope Imaging Spectrograph

Although methane is the dominant absorber in Titan's reflection spectrum, the amount of methane in the atmosphere has only been determined to an order of magnitude. We analyzed spectra from the Space Telescope Imaging Spectrograph, looking at both a bright surface region (700-km radius) and a dark surface region. The difference between the spectra of the two regions is attributed to light that has scattered off the surface, and therefore made a round-trip through all of Titan's methane. Considering only absorption, the shape of the difference spectrum provides an upper limit on methane abundance of 3.5 km-am. Modeling the multiple scattering in the atmosphere further constrains the methane abundance to 2.63±0.17 km-am. In the absence of supersaturation and with a simplified methane vertical profile, this corresponds to a surface methane-mole fraction near 3.8% and a relative humidity of 0.32. With supersaturation near the tropopause, the surface methane mole fraction could be as low as 3%.     

Recent Changes in the Near-Infrared Structure of eta Carinae

I present the first results from a Hubble Space Telescope/NICMOS imaging study of the most metal-poor blue compact dwarf galaxy, I Zw 18. The near-infrared color-magnitude diagram (CMD) is dominated by two populations, one 10-20 Myr population of red supergiants and one 0.1-5 Gyr population of asymptotic giant branch stars. Stars older than 1 Gyr are required to explain the observed CMD at the adopted distance of 12.6 Mpc, showing that I Zw 18 is not a young galaxy. The results hold also if the distance to I Zw 18 is significantly larger. This rules out the possibility that I Zw 18 is a truly young galaxy formed recently in the local universe.     

ASCA Observation of the Quiescent X-Ray Counterpart to SGR 1627-41

We present a 2-10 keV ASCA observation of the field around the soft gamma repeater SGR 1627-41. A quiescent X-ray source, whose position is consistent both with that of a recently discovered BeppoSAX X-ray source and with the Interplanetary Network localization for this soft gamma repeater, was detected in this observation. In 2-10 keV X-rays, the spectrum of the X-ray source may be fit equally well by a power-law, blackbody, or bremsstrahlung function, with unabsorbed flux approximately 5x10-12 ergs cm-2 s-1. We do not confirm a continuation of a fading trend in the flux, and we find no evidence for periodicity, both of which were noted in the earlier BeppoSAX observations.     

Ionospheric measurements of relative coronal brightness during the total solar eclipses of 11 August, 1999 and 9 July, 1945

Swept-frequency (1/10 MHz) ionosonde measurements were made at Helston, Cornwall (50°06N, 5°18W) during the total solar eclipse on August 11, 1999. Soundings were made every three minutes. We present a method for estimating the percentage of the ionising solar radiation which remains unobscured at any time during the eclipse by comparing the variation of the ionospheric E-layer with the behaviour of the layer during a control day. Application to the ionosonde date for 11 August, 1999, shows that the flux of solar ionising radiation fell to a minimum of 25±2% of the value before and after the eclipse. For comparison, the same technique was also applied to measurements made during the total solar eclipse of 9 July, 1945, at Sörmjöle (63°68N, 20°20E) and yielded a corresponding minimum of 16 ± 2%. Therefore the method can detect variations in the fraction of solar emissions that originate from the unobscured corona and chromosphere. We discuss the differences between these two eclipses in terms of the nature of the eclipse, short-term fluctuations, the sunspot cycle and the recently-discovered long-term change in the coronal magnetic field.     

Influence of uncertain boundary conditions and model structure on flood inundation predictions

In this study, the GLUE methodology is applied to establish the sensitivity of flood inundation predictions to uncertainty of the upstream boundary condition and bridges within the modelled region. An understanding of such uncertainties is essential to improve flood forecasting and floodplain mapping. The model has been evaluated on a large data set. This paper shows uncertainty of the upstream boundary can have significant impact on the model results, exceeding the importance of model parameter uncertainty in some areas. However, this depends on the hydraulic conditions in the reach e.g. internal boundary conditions and, for example, the amount of backwater within the modelled region. The type of bridge implementation can have local effects, which is strongly influenced by the bridge geometry (in this case the area of the culvert). However, the type of bridge will not merely influence the model performance within the region of the structure, but also other evaluation criteria such as the travel time. This also highlights the difficulties in establishing which parameters have to be more closely examined in order to achieve better fits. In this study no parameter set or model implementation that fulfils all evaluation criteria could be established. We propose four different approaches to this problem: closer investigation of anomalies; introduction of local parameters; increasing the size of acceptable error bounds; and resorting to local model evaluation. Moreover, we show that it can be advantageous to decouple the classification into behavioural and non-behavioural model data/parameter sets from the calculation of uncertainty bounds.     

Link between SSZ ophiolite formation, emplacement and arc inception, Northland, New Zealand: U–Pb SHRIMP constraints; Cenozoic SW Pacific tectonic implications

New U–Pb age-data from zircons separated from a Northland ophiolite gabbro yield a mean ²⁰⁶Pb/²³⁸U age of 31.6 ± 0.2 Ma, providing support for a recently determined 28.3 ± 0.2 Ma SHRIMP age of an associated plagiogranite and  29–26 Ma ⁴⁰Ar/³⁹Ar ages (n = 9) of basalts of the ophiolite. Elsewhere, Miocene arc-related calc-alkaline andesite dikes which intrude the ophiolitic rocks contain zircons which yield mean ²⁰⁶Pb/²³⁸U ages of 20.1 ± 0.2 and 19.8 ± 0.2 Ma. The ophiolite gabbro and the andesites both contain rare inherited zircons ranging from 122–104 Ma. The Early Cretaceous zircons in the arc andesites are interpreted as xenocrysts from the Mt. Camel basement terrane through which magmas of the Northland Miocene arc lavas erupted. The inherited zircons in the ophiolite gabbros suggest that a small fraction of this basement was introduced into the suboceanic mantle by subduction and mixed with mantle melts during ophiolite formation.

We postulate that the tholeiitic suite of the ophiolite represents the crustal segment of SSZ lithosphere (SSZL) generated in the southern South Fiji Basin (SFB) at a northeast-dipping subduction zone that was initiated at about 35 Ma. The subduction zone nucleated along a pre-existing transform boundary separating circa 45–20 Ma oceanic lithosphere to the north and west of the Northland Peninsula from nascent back arc basin lithosphere of the SFB. Construction of the SSZL propagated southward along the transform boundary as the SFB continued to unzip to the southeast. After subduction of a large portion of oceanic lithosphere by about 26 Ma and collision of the SSZL with New Zealand, compression between the Australian Plate and the Pacific Plate was taken up along a new southwest-dipping subduction zone behind the SSZL. Renewed volcanism began in the oceanic forearc at 25 Ma producing boninitic-like, SSZ and within-plate alkalic and calc-alkaline rocks. Rocks of these types temporally overlap ophiolite emplacement and subsequent Miocene continental arc construction.     

Geochemistry and magmatic properties of eruption episodes from Haroharo linear vent zone, Okataina Volcanic Centre, New Zealand during the last 10 kyr

Post-10 ka rhyolitic eruptions from the Haroharo linear vent zone, Okataina Volcanic Centre, have occurred from several simultaneously active vents spread over 12 km. Two of the three eruption episodes have tapped multiple compositionally distinct homogeneous magma batches. Three magmas totalling ~8 km³ were erupted during the 9.5 ka Rotoma episode. The most evolved Rotoma magma (SiO₂=76.5–77.9 wt%, Sr=96–112 ppm) erupted from a southeastern vent, and is characterised by a cummingtonite-dominant mineralogy, a temperature of 739±14°C, and fO₂ of NNO+0.52±0.11. The least evolved (SiO₂=75.0–76.4 wt%, Sr=128–138 ppm, orthopyroxene+ hornblende-dominant) Rotoma magma erupted from several vents, and was hotter (764±18°C) and more reduced (NNO+0.40±0.13). The ~11 km³ Whakatane episode occurred at 5.6 ka and also erupted three magmas, each from a separate vent. The most evolved (SiO₂=73.3–76.2 wt%, Sr=88–100 ppm) Whakatane magma erupted from the southwestern (Makatiti) vent and is cummingtonite-dominant, cool (745±11°C), and reduced (NNO+0.34±0.08). The least evolved (SiO₂=72.8–74.1 wt%, Sr=132–134 ppm) magma was erupted from the northeastern (Pararoa) vent and is characterised by an orthopyroxene+ hornblende-dominant mineralogy, temperature of 764±18°C, and fO₂ of NNO+0.40±0.13. Compositionally intermediate magmas were erupted during the Rotoma and Whakatane episodes are likely to be hybrids. A single ~13 km³ magma erupted during the intervening 8.1 ka Mamaku episode was relatively homogeneous in composition (SiO₂=76.1–76.8 wt%, Sr=104–112 ppm), temperature (736±18°C), and oxygen fugacity (NNO+0.19±0.12). Some of the vents tapped a single magma while others tapped several. Deposit stratigraphy suggests that the eruptions alternated between magmas, which were often simultaneously erupted from separate vents. Both effusive and explosive activity alternated, but was predominantly effusive (>75% erupted as lava domes and flows). The plumbing systems which fed the vents are inferred to be complex, with magma experiencing different conditions in the conduits. As the eruption of several magmas was essentially concurrent, the episodes were likely triggered by a common event such as magmatic intrusion or seismic disturbance.     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.