Contents to Volume 7

Volume Contents

Contents to Volume 7     

High-field cantilever magnetometry as a tool for the determination of the magnetocrystalline anisotropy of single crystals

Cantilever torque magnetometry is utilized widely in physics and material science for the determination of magnetic properties of thin films and semiconductors. Here, we report on its first application in rock magnetism, namely the determination of K₁ and K₂ of single crystal octahedra of natural magnetite. The design of cantilever magnetometers allows optimization for the specific research question at hand. For the present study, a cantilever magnetometer was used that enables measurement of samples with a volume up to 64 mm³. It can be inserted into an electromagnet with a maximum field of 2 T. The cantilever spring is suitable for torque values ranging from 7.5 × 10^− 7 N·m to 5 × 10^− 6 N·m. The torque is detected capacitively; the measured capacitance is converted into torque by using a calibrated feedback coil. The magnetometer allows in-situ rotation of the sample in both directions and is, therefore, also suitable to analyze rotational hysteresis effects.The evaluation of the magnetite anisotropy constants involved Fourier analysis of the torque signal on the magnetite crystals' (001) and (110) planes. The absolute anisotropy constant has been computed using the extrapolation-to-infinite-field method. The value of K₁ at room temperature is determined at − 1.28 × 10⁴ [J m^− 3] (± 0.13, i.e. 10%) and that of K₂ at − 2.8 × 10³ [J m^− 3] (± 0.1, i.e. 2%). These values concur with earlier determinations that could not provide an instrumental error, in contrast with this work.The cantilever magnetometer performs four times faster than other torque magnetometers used for rock magnetic studies. This makes the instrument also suitable for magnetic fabric analysis.     

Discussion: Oil seepage or fossil podzol? An Early Oligocene oil seepage at the southern rim of the North Sea Basin,near Leuven (Belgium) by E.D. van Riessen & N. Vandenberghe,Geologie en Mijnbouw 74: 301-312 (1996)

Geologie en Mijnbouw -     

The CM carbonaceous chondrite regolith Diepenveen

A carbonaceous chondrite was recovered immediately after the fall near the village of Diepenveen in the Netherlands on October 27, 1873, but came to light only in 2012. Analysis of sodium and poly‐aromatic hydrocarbon content suggests little contamination from handling. Diepenveen is a regolith breccia with an overall petrology consistent with a CM classification. Unlike most other CM chondrites, the bulk oxygen isotopes are extremely ¹⁶O rich, apparently dominated by the signature of anhydrous minerals, distributed on a steep slope pointing to the domain of intrinsic CM water. A small subset plots closer to the normal CM regime, on a parallel line 2 ‰ lower in δ¹⁷O. Different lithologies in Diepenveen experienced varying levels of aqueous alteration processing, being less aqueously altered at places rather than more heated. The presence of an agglutinate grain and the properties of methanol‐soluble organic compounds point to active impact processing of some of the clasts. Diepenveen belongs to a CM clan with ~5 Ma CRE age, longer than most other CM chondrites, and has a relatively young K‐Ar resetting age of ~1.5 Ga. As a CM chondrite, Diepenveen may be representative of samples soon to be returned from the surface of asteroid (162173) Ryugu by the Hayabusa2 spacecraft.     

Data-driven retrieval of primary plane-wave responses

Seismic images provided by reverse time migration can be contaminated by artefacts associated with the migration of multiples. Multiples can corrupt seismic images, producing both false positives, that is by focusing energy at unphysical interfaces, and false negatives, that is by destructively interfering with primaries. Multiple prediction/primary synthesis methods are usually designed to operate on point source gathers and can therefore be computationally demanding when large problems are considered. A computationally attractive scheme that operates on plane-wave datasets is derived by adapting a data-driven point source gathers method, based on convolutions and cross-correlations of the reflection response with itself, to include plane-wave concepts. As a result, the presented algorithm allows fully data-driven synthesis of primary reflections associated with plane-wave source responses. Once primary plane-wave responses are estimated, they are used for multiple-free imaging via plane-wave reverse time migration. Numerical tests of increasing complexity demonstrate the potential of the proposed algorithm to produce multiple-free images from only a small number of plane-wave datasets.     

Identification and Explanation of a Change in the Groundwater Regime using Time Series Analysis

Time series analysis is applied to identify and analyze a transition in the groundwater regime in the aquifer below the sand ridge of Salland in the Netherlands, where groundwater regime refers to the range of head variations throughout the seasons. Standard time series analysis revealed a discrepancy between modeled and observed heads in several piezometers indicating a possible change in the groundwater regime. A new time series modeling approach is developed to simulate the transition from the initial regime to the altered regime. The transition is modeled as a weighted sum of two responses, one representing the initial state of the system, the other representing the altered state. The inferred timing and magnitude of the change provided strong evidence that the transition was the result of significant dredging works that increased the river bed conductance of the main river draining the aquifer. The plausibility of this explanation is corroborated by an analytical model. This case study and the developed approach to identify a change in the groundwater regime are meant to stimulate a more systematic application of time series analysis to detect and understand changes in groundwater systems which may easily go unnoticed in groundwater flow modeling.     

High-resolution optical dating of Late Holocene storm surge deposits – a showcase from Schokland (Noordoostpolder,the Netherlands)

Storm surges have a major impact on land use and human habitation in coastal regions. Our knowledge of this impact can be improved by correlating long-term historical storm records with sedimentary evidence of storm surges, but so far few studies have applied such an approach. Here we apply, for the first time, state-of-the-art optically stimulating luminescence (OSL) methods to obtain high-resolution age information on a sequence of Late Holocene storm surge deposits. By combining this chronological framework of storm surges with other reconstruction methods, we investigate the storm surge impact on the former island Schokland, located in a former inlet of the North Sea (central Netherlands).During the Late Holocene, Schokland transformed from a peat area that gradually inundated (~800 CE) via an island in a marginal marine environment (~1600 CE) to a land-locked island in the reclaimed Province of Flevoland (1942 CE). These transitions are recorded in the sediment archive of the island, consisting of silty clay with sandy intervals deposited during storm surges. A series of ten quartz OSL ages, obtained using best-practice methods to deal with incomplete resetting of the OSL signal and dose rate heterogeneity, reveal two periods of storm surge deposition, around 1600 CE and between 1742 and 1822 CE. Historical sources indicate that major storm surges hit Schokland during these periods. Laboratory analyses (thermogravimetry, grain-size, foraminifera, bivalves and ostracods) corroborates the existence of the two sets of storm surge deposits within the clay sequence. Our study sets a benchmark for obtaining robust depositional age constraints from storm surge sediments, and demonstrates the great potential of modern OSL methods to contribute to improved assessment of storm surge risk. © 2018 John Wiley & Sons, Ltd.     

River response to variations of periglacial climate in mid-latitude Europe

The Last Glaciation was characterised by considerable changes in climate. Many European river basins reacted to these changes by initial incision and subsequent pattern change. Earlier research explained this by the time lag of vegetation development after a climatic change, which considerably affected the sediment load. However, since some river basins react differently, or do not react at all, this model needs to be refined. This paper deals with the fluvial evolution of several rivers in northern and central Europe during the Last Glaciation, and two of them, the Weiße Elster river in the Leipzig area and the Spree river in the Niederlausitz (Germany), are discussed in more detail. The vegetation cover on the floodplain, in combination with the presence of frozen ground, which affects the discharge characteristics, largely determines the river type. Nevertheless, when the sequences are compared, not only synchronous changes in fluvial development may be observed, but also distinct differences in fluvial development. By analysing the different rivers in their varying geomorphological settings, it appears that grain size, basin configuration and catchment size are important parameters also, which can determine whether a threshold is exceeded or not.     

RCP2.6: exploring the possibility to keep global mean temperature increase below 2��C

The RCP2.6 emission and concentration pathway is representative of the literature on mitigation scenarios aiming to limit the increase of global mean temperature to 2°C. These scenarios form the low end of the scenario literature in terms of emissions and radiative forcing. They often show negative emissions from energy use in the second half of the 21st century. The RCP2.6 scenario is shown to be technically feasible in the IMAGE integrated assessment modeling framework from a medium emission baseline scenario, assuming full participation of all countries. Cumulative emissions of greenhouse gases from 2010 to 2100 need to be reduced by 70% compared to a baseline scenario, requiring substantial changes in energy use and emissions of non-CO₂ gases. These measures (specifically the use of bio-energy and reforestation measures) also have clear consequences for global land use. Based on the RCP2.6 scenario, recommendations for further research on low emission scenarios have been formulated. These include the response of the climate system to a radiative forcing peak, the ability of society to achieve the required emission reduction rates given political and social inertia and the possibilities to further reduce emissions of non-CO₂ gases.