Potential of superelastic Cu–Al–Mn alloy bars for seismic applications

We present the results of the quasi‐static cyclic tensile tests of Cu–Al–Mn shape memory alloy (SMA) bars of 4 and 8 mm diameters to examine their superelasticity and other mechanical properties closely related to seismic applications. The present Cu–Al–Mn SMA bars have achieved the recovery strains of over 8% and the fracture strains of over 17%. Low‐cycle fatigue was observed in neither of the bars. The mechanical properties obtained from the test, along with the lower material cost and higher machinability than Ni–Ti SMAs, demonstrate the high potential of the present Cu–Al–Mn SMA bars to be used in seismic applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Diffuse pollution by persistent organic pollutants as measured in plastic pellets sampled from various beaches in Greece

Plastic pellets found stranded on beaches are hydrophobic organic materials and thus, they are a favourable medium for persistent organic pollutants to absorb to. In the present study, plastic pellets are used to determine the diffuse pollution of selected Greek beaches. Samples of pellets were taken from these beaches and were analyzed for PCBs, DDTs, HCHs, and PAHs. The observed differences among pellets from various sampling sites are related to the pollution occurring at each site. Plastic pellets collected in Saronikos Gulf beaches demonstrate much higher pollutant loading than the ones collected in a remote island or close to an agricultural area. Based on data collected in this study and the International Pellet Watch program, pollution in Saronikos Gulf, Greece, is comparable to other heavily industrialized places of the world. The present study demonstrates the potential of pellet watch to be utilized as a detailed-scale monitoring tool within a single country.     

Cathodoluminescence microscopy and spectroscopy of forsterite from Kaba meteorite: An application to the study of hydrothermal alteration of parent body

Highly forsteritic olivine (Fo: 99.2–99.7) in the Kaba meteorite emits bright cathodoluminescence (CL). CL spectra of red luminescent forsterite grains have two broad emission bands at approximately 630 nm (impurity center of divalent Mn ions) in the red region and above 700 nm (trivalent Cr ions) in the red–IR region. The cores of the grains show CL blue luminescence giving a characteristic broad band emission at 400 nm, also associated with minor red emissions related to Mn and Cr ions. CL color variation of Kaba forsterite is attributed to structural defects. Electron probe microanalyzer (EPMA) analysis shows concentrations of Ca, Al, and Ti in the center of the forsterite grain. The migration of diffusible ions of Mn, Cr, and Fe to the rim of the Kaba meteoritic forsterite was controlled by the hydrothermal alteration at relatively low temperature (estimated at about 250 °C), while Ca and Al ions might still lie in the core. A very unusual phase of FeO (wüstite) was also observed, which may be a terrestrial alteration product of FeNi‐metal.     

Comparison of seismicity declustering methods using a probabilistic measure of clustering

We present a new measure of earthquake clustering and explore its use for comparing the performance of three different declustering methods. The advantage of this new clustering measure over existing techniques is that it can be used for non-Poissonian background seismicity and, in particular, to compare the results of declustering algorithms where different background models are used. We use our approach to study inter-event times between successive earthquakes using earthquake catalog data from Japan and southern California. A measure of the extent of clustering is introduced by comparing the inter-event time distributions of the background seismicity to that of the whole observed seismicity. Theoretical aspects of the clustering measure are then discussed with respect to the Poissonian and Weibull models for the background inter-event time distribution. In the case of a Poissonian background, the obtained clustering measure shows a decrease followed by an increase, defining a V-shaped trend, which can be explained by the presence of short- and long-range correlation in the inter-event time series. Three previously proposed declustering methods (i.e., the methods of Gardner and Knopoff, Reasenberg, and Zhuang et al.) are used to obtain an approximation of the residual “background” inter-event time distribution in order to apply our clustering measure to real seismicity. The clustering measure is then estimated for different values of magnitude cutoffs and time periods, taking into account the completeness of each catalog. Plots of the clustering measure are presented as clustering attenuation curves (CACs), showing how the correlation decreases when inter-event times increase. The CACs demonstrate strong clustering at short inter-event time ranges and weak clustering at long time ranges. When the algorithm of Gardner and Knopoff is used, the CACs show strong correlation with a weak background at the short inter-event time ranges. The fit of the CACs using the Poissonian background model is successful at short and intermediate inter-event time ranges, but deviates at long ranges. The observed deviation shows that the residual catalog obtained after declustering remains non-Poissonian at long time ranges. The apparent background fraction can be estimated directly from the CAC fit. The CACs using the algorithms of Reasenberg and Zhuang et al. show a relatively similar behavior, with a time correlation decreasing more rapidly than the CACs of Gardner and Knopoff for shorter time ranges. This study offers a novel approach for the study of different types of clustering produced as a result of various hypotheses used to account for different backgrounds.     

Eutrophication-induced changes in Lake Nakaumi,southwest Japan

Lake Nakaumi, southwest Japan, is an enclosed lagoon characterized by polyhaline and halocline conditions. Since the last century, its ecological state has been altered by eutrophication. We used a paleolimnological approach and studied multiple proxies, including chemical compounds, diatoms, foraminifera and molluscs, to infer the eutrophication history of the ecosystem. Eutrophication in Lake Nakaumi was associated with several factors, including increased nutrient loading, input of herbicides, and dike building since the 1920s. The ecological condition of this lake was divided into several stages that reflect the eutrophication process after the 1940s. A catastrophic “regime shift” from a clear state with aquatic vegetation to a turbid one with phytoplankton occurred in the early 1950s. Environmental degradation in the Honjo area, a part of Lake Nakaumi, was attributed primarily to physical changes caused by the construction of an enclosing dike. Eutrophication occurred almost simultaneously with the physical changes to the Honjo area in the 1970s. Until recently, no regime shift was observed in this area, though the core-top sediments show possible symptoms of incipient change.     

Water content variations and respective ecosystems of sandy land in China

Soil water conservation is essential to the sustainability of sandy farming. In this paper, long-term observation of soil water, dry soil thickness and soil chemical changes are evaluated at eight locations in sandy soil. This paper subdivides the sandy lands and deserts of China into three climate zones: arid (hyperarid and extremely arid), semiarid, and humid (subhumid and subtropical humid), with respect to the bioclimatic zone, aridity, soil water content, and soil chemical characteristics. The water movement conditions, and chemical variations in each zone are analyzed. The paper also estimates the spatial and temporal correlation function of arid soil thickness and soil moisture. Sandy soils organic matter content, CaCO₃ content, soluble salts content are investigated. Afforestation and selection of tree species in different sandy areas are suggested to regulate sandy land soil moisture. Sandy land in China can be divided into the four sand stabilization regions according to the shifting sand conditions and the techniques advanced: regions I, II, III, and IV. These results have important implications for remote sensing of soil moisture and soil organic carbon, and soil moisture parameterization in climate models.     

A prototype global volcano surveillance system monitoring seismic activity and tilt

The Earth Resources Technology Satellite makes it feasible for the first time to monitor the level of activity at widely separated volcanoes and to relay these data almost instantancously to one central office. This capability opens a new era in volcanology where the hundreds of normally quiescent but potentially dangerous volcanoes near populated regions around the world can be economically and reliably monitored. A prototype global volcano surveillance system has been established beginning in the fall of 1972 with the help of local scientists on 15 volcanoes in Alaska, Hawaii, Washington, California, Iceland. Guatemala, El Salvador, and Nicaragua. Data on earthquake activity and ground tilt are received 6 to 10 times daily in Menlo Park, California, within 90 minutes of transmission from the sites. Seismic event counters were installed at 19 locations with biaxial borehole tiltineters with 1 microradian sensitivity installed at seven sites. Direct comparison of seismic events that are counted with records from nearby seismic stations show the event counters work quite reliably. An order of magnitude increase in seismic events was observed prior to the eruption of Volcán Fuego in Guatemala in February, 1973. Significant changes in tilt were observed on volcanoes Kilauea. Fuego, and Pacava. This study demonstrates the technological and economic feasibility of utilizing such a volcano surveillance system throughout the world.     

Symmetropy of Fault Patterns: Quantitative Measurement of Anisotropy and Entropic Heterogeneity

The purpose of the effort in this paper is to show symmetropy of fault patterns. This quantity can be considered as a measure of entropic heterogeneity and anisotropy. We describe this measure based on the discrete Walsh transform. The specific results of its applications are obtained as follows. When a rock specimen undergoes creep in a laboratory experiment, the fault propagation can be monitored by the decrease of symmetropy. Moreover, in a fault model with self-organized criticality, fault patterns of critical states and subcritical states are distinguished by the behavior of the symmetropy: subcritical fault patterns show almost constant value of symmetropy but it takes various values during critical states. These results demonstrate that symmetropy idea can be used for the quantification of fault patterns.     

Barchan ripples under unidirectional water flows in the laboratory: formation and planar morphology

The purpose of the present study is to investigate the formation and planar shape of barchan ripples generated by laboratory unidirectional water currents and to compare the morphology with that of barchans formed by laboratory waves and flows in natural environments. A thin veneer of sand as a sediment source was placed initially at the upstream part of a recirculating flume and the change in bed configurations by the flow was recorded by a video camera. Two types of formative process were observed: one was that barchan ripples grew from barchanoid bedforms and the other was that they developed from a small aggregate of sand particles. The barchan ripples in the present test had the same characteristics in the height–width relation and in the migration speed as previously reported from the desert environment and wave‐flume studies. An examination of the planar shape of the barchans led to the result that the barchan ripples had larger values of body‐length/width, compared with those of barchans formed by water waves in the laboratory and by airflow in natural deserts. The horn‐length/width of the barchan ripples was smaller than that of barchan dunes in deserts but larger than that of barchans in oscillatory laboratory flows. Copyright © 2005 John Wiley & Sons, Ltd.     

High temperature X-ray study of single crystal stishovite synthesized with Li2WO4 as flux

Single crystal stishovite with a square prismatic habit and maximum length 0.8 mm was grown from α-quartz at 120 kbar and ～1,300° C. Li₂WO₄, chosen as a result of a previous experiment in growing coesite, was also successful as flux for stishovite. Single crystal X-ray structure analysis of the crystals thus obtained has been carried out at high temperatures under ambient pressure. Lattice constant measurements give a larger thermal expansion coefficient along the a-axis than along the c-axis. The bond distances and bond angles show a decreasing distortion of the SiO₆ octahedron with increasing temperature. The increasing amplitude of thermal vibrations of oxygen atoms with increasing temperature results in increasing O-O repulsion in the basal plane, which explains the observed crystallographic changes.