Announcement

Reports

Announcement     

Comparison of sinking particles in the upper 200 m between subarctic station K2 and subtropical station S1 based on drifting sediment trap experiments

Drifting sediment trap experiments were conducted during various seasons to elucidate the characteristics of particles sinking through the upper 200 m of the water column in the western Pacific at subarctic station K2 and subtropical station S1. The sinking particle flux increased when primary productivity was high at each station, during June–July at K2 and during February at S1. Biogenic opal (Opal) and CaCO₃ were the major components of the fluxes at K2 and S1, respectively. Contrary to the expectation of a high flux at the eutrophic station K2 and low flux at the oligotrophic station S1, the annual average organic carbon fluxes at 100 m were comparable at both stations: 62.7 mg C m^?2 day^?1 at K2 and 56.1 mg C m^?2 day^?1 at S1. The similarity of the fluxes was perhaps a reflection of the unexpectedly high primary production at S1. At K2, the organic carbon export ratio (organic carbon flux/primary productivity) was significantly and negatively correlated with primary production and tended to decrease with depth. The magnitude of the rate of attenuation of the organic carbon flux with depth was larger at S1 than at K2. This rate of attenuation tended to decrease and increase with primary production at K2 and S1, respectively. The explanation for these patterns may be that the flux of labile organic carbon at relatively shallow depths decreased with increasing primary production at K2, and zooplankton grazing pressure increased with increasing primary productivity at S1.     

Podiform chromitites in the lherzolite-dominant mantle section of the Isabela ophiolite, the Philippines

Abstract The Isabela ophiolite, the Philippines, is characterized by a lherzolite‐dominant mantle section, which was probably formed beneath a slow‐spreading mid‐ocean ridge. Several podiform chromitites occur in the mantle section and grade into harzburgite to lherzolite. The chromitites show massive, nodular, layered and disseminated textures. Clinopyroxene (±orthopyroxene/amphibole) inclusions within chromian spinel (chromite hereafter) are commonly found in the massive‐type chromitites. Large chromitites are found in relatively depleted harzburgite hosts having high‐Cr? (Cr/(Cr + Al) atomic ratio = ～0.5) chromite. Light rare earth element (LREE) contents of clinopyroxenes in harzburgites near the chromitites are higher than those in lherzolite with low‐Cr? chromite, whereas heavy REE (HREE) contents of clinopyroxenes are lower in harzburgite than in lherzolite. The harzburgite near the chromitites is not a residual peridotite after simple melt extraction from lherzolite but is formed by open‐system melting (partial melting associated with influx of primitive basaltic melt of deeper origin). Clinopyroxene inclusions within chromite in chromitites exhibit convex‐shaped REE patterns with low HREE and high LREE (+Sr) abundances compared to the host peridotites. The chromitites were formed from a hybridized melt enriched with Cr, Si and incompatible elements (Na, LREE, Sr and H₂O). The melt was produced by mixing of secondary melts after melt–rock interaction and the primitive basaltic melts in large melt conduits, probably coupled with a zone‐refining effect. The Cr? of chromites in the chromitites ranges from 0.65 to 0.75 and is similar to those of arc‐related magmas. The upper mantle section of the Isabela ophiolite was initially formed beneath a slow‐spreading mid‐ocean ridge, later introduced by arc‐related magmatisms in response to a switch in tectonic setting during its obduction at a convergent margin.     

Comparative response and performance of base‐isolated and fixed‐base structures

A building with a seismic isolation system, in an earthquake, is recognized as producing substantially smaller accelerations and deformations compared with a building that use other systems. This type of system is therefore expected to better protect the building's nonstructural components, equipment, and other contents that are essential for the activities conducted in the building. Unlike many available studies on building responses, only a small number of studies on a buildings' nonstructural component responses are available, and no study has directly addressed building performance with regard to nonstructural component protection. This paper therefore measures the performance of various seismically isolated buildings. Specifically, the effects of important structural parameters, namely, isolation stiffness, isolation damping ratio, and number of stories on the response of base‐isolated structures are investigated parametrically. Ground motions with 2% exceedence in 50years Maximum Considered Earthquake (MCE) are used. Performance is compared with that of fixed‐base structures in order to present data that will be useful in justifying the more costly technology. The buildings are 3, 9, and 20 stories, represented by MDOF shear‐beam models. As examples of displacement‐sensitive and acceleration‐sensitive components, partition walls and ceilings are considered, respectively. The Pacific Earthquake Engineering Research Center performance‐based earthquake engineering methodology is adopted to evaluate the failure return periods of the examples based on their available fragility curves. In addition, the curves are varied hypothetically to understand the sensitivity of the return period to the curve features. Then, the median and dispersion of fragility curves required to satisfy the components' desired failure return period are obtained. Copyright © 2015 John Wiley & Sons, Ltd.     

Paleoenvironmental interpretations of Quaternary reef deposits based on comparisons of 10 selected modern and fossil larger foraminifera from the Ryukyu Islands, Japan

Abstract A new method for reconstructing depositional environments of larger foraminifera‐bearing limestones is proposed. First, depth and spatial distributions of empty tests of 10 foraminiferal taxa in a 1–2 mm size fraction were examined using 32 surface sediment samples collected from depths shallower than 200 m, located to the west of Miyako Island, Ryukyu Islands, northwest Pacific. Distributional ranges of empty tests in the 1–2 mm size fraction appear to be more limited than those including other size fractions in previous reports, partly because larger empty tests of each taxon are less easily transported than smaller ones. Multivariate analyses (Q‐mode cluster analysis and non‐metric multidimensional scaling ordination) based on binary (presence/absence) data of the 10 taxa delineate four sample groups, each of which corresponds to different depositional environments: nearshore zone/bay inlet; back‐reef to fore‐reef; outer shelf to shelf slope; and shelf slope distant from coral reefs. Next, these modern data were applied to reconstruct the depositional environment of a rock section distributed in the Shiratorizaki area (Irabu Island, Ryukyu Islands), which consists of larger foraminiferal limestone of the Pleistocene Ryukyu Group. Multivariate analyses were performed on the fossil plus the modern foraminiferal data to explore the possible relationship of the fossil associations with variations in modern associations, demonstrating that the fossil foraminiferal associations resemble the modern outer shelf associations. The modern analog technique was also applied to estimate paleobathymetry using fossil foraminiferal data. The results indicate that the section studied was deposited in outer shelf environments at depths between 53.5 and 98.6 m. These paleoenvironmental interpretations are consistent with previous studies based on sedimentary facies and the computer‐based expert system. The modern dataset and methods used in our work would be particularly useful for paleoenvironmental reconstructions of Quaternary reef and shelf carbonates along active margins of the northwest Pacific.     

Clay Minerals in an Active Hydrothermal Field at Iheya‐North‐Knoll,Okinawa Trough

Iheya‐North‐Knoll is one of the small knolls covered with thick sediments in the Okinawa Trough back‐arc basin. At the east slope of Iheya‐North‐Knoll, nine hydrothermal vents with sulfide mounds are present. The Integrated Ocean Drilling Program (IODP) Expedition 331 studied Iheya‐North‐Knoll in September 2010. The expedition provided us with the opportunity to study clay minerals in deep sediments in Iheya‐North‐Knoll. To reveal characteristics of clay minerals in the deep sediments, samples from the drilling cores at three sites close to the most active hydrothermal vent were analyzed by X‐ray diffraction, scanning electron microscope and transmission electron microscope. The sediments are classified into Layer 0 (shallow), Layer 1 (deep), Layer 2 (deeper) and Layer 3 (deepest) on the basis of the assemblage of clay minerals. Layer 0 contains no clay minerals. Layer 1 contains smectite, kaolinite and illite/smectite mixed‐layer mineral. Layer 2 contains chlorite, corrensite and chlorite/smectite mixed‐layer mineral. Layer 3 is grouped into three sub‐layers, 3A, 3B and 3C; Sub‐layer 3A contains chlorite and illite/smectite mixed‐layer mineral, sub‐layer 3B contains chlorite/smectite and illite/smectite mixed‐layer minerals, and sub‐layer 3C contains chlorite and illite. Large amounts of di‐octahedral clay minerals such as smectite, kaolinite, illite and illite/smectite mixed‐layer mineral are found in Iheya‐North‐Knoll, which is rarely observed in hydrothermal fields in mid‐ocean ridges. Tri‐octahedral clay minerals such as chlorite, corrensite and chlorite/smectite mixed‐layer mineral in Iheya‐North‐Knoll have low Fe/(Fe + Mg) ratios compared with those in mid‐ocean ridges. In conclusion, the characteristics of clay minerals in Iheya‐North‐Knoll differ from those in mid‐ocean ridges; di‐octahedral clay minerals and Fe‐poor tri‐octahedral clay minerals occur in Iheya‐North‐Knoll but not in mid‐ocean ridges.     

Compressional wave velocity of granite and amphibolite up to melting temperatures at 1 GPa

Compressional wave velocities (V_P) at above-solidus temperatures and at 1 GPa were obtained for a granite and amphibolite, which are considered to be major constituents of the continental crust. The temperature variation of velocities showed that the V_P values of granite decreased with rising temperature, but substantially increased beyond the melting temperature (850–900 °C). Such an increase may be caused by the α–β transition of quartz. The velocities of amphibolite decreased linearly with increasing temperature and dropped sharply at temperatures above the solidus (700 °C), indicating that partial melting of amphibolite acts to significantly lower the seismic velocities.