Experimental investigation of runoff reduction and sediment removal by vegetated filter strips

The impact of vegetated filter strips (VFS) on sediment removal from runoff has been studied extensively in recent years. Vegetation is believed to increase water infiltration and decrease water turbulence thus enhancing sediment deposition within filter media. In the study reported here, field experiments have been conducted to examine the efficiency of vegetated filter strips for sediment removal from cropland runoff. Twenty filters with varying length, slope and vegetated cover were used under simulated runoff conditions with an average sediment concentration of 2700 mg/L. The filters were 2, 5, 10 and 15 m long with a slope of 2·3 and 5% and three types of vegetation. Three other strips with bare soil were used as a control. The experimental results showed that the average sediment trapping efficiency of all filters was 84% and ranging from 68% in a 2‐m filter to as high as 98% in a 15‐m long filter compared with only 25% for the control. The length of filter has been found to be the predominant factor affecting sediment deposition in VFS up to 10 m. Increasing filter length to 15 m did not improve sediment trapping efficiency under the present experimental conditions. The rate of incoming flow and vegetation cover percentage has a secondary effect on sediment deposition in VFS. Copyright © 2004 John Wiley & Sons, Ltd.     

Sapphirine + quartz assemblage in contrasting textural modes from the Eastern Ghats Belt, India: Implications for stability relations in UHT metamorphism and retrograde processes

Stability of the assemblage sapphirine + quartz in Mg–Al-rich granulites implies ultrahigh temperature (UHT) condition of metamorphism but their direct contact is rarely preserved in natural rocks. The present study shows contrasting textural relations between sapphirine and quartz in different parts of the same occurrence of a Mg–Al-rich granulite, Eastern Ghats Belt, India. Textural data suggest stabilization of the assemblage sapphirine + quartz with orthopyroxene and cordierite during the metamorphic peak. Thermometric estimates yield temperature exceeding 950 °C for the stability of this assemblage. Most of such sapphirine grains (Spr₁) are texturally separated from quartz and cordierite grains by double corona of sillimanite + orthopyroxene that results due to isobaric cooling during the post-peak stage. Sapphirine (Spr₂) also forms a symplectic intergrowth with quartz and orthopyroxene at the fringe of coarse orthopyroxene. This textural feature can be explained by the breakdown of (Fe, Mg)-Tschermak components of orthopyroxene during the same isobaric cooling episode from UHT peak condition. The preservation of grain contact of this intergrown sapphirine and quartz can be attributed to a problem in reaction kinetics. In the other mode, sapphirine (Spr₃) occurs with quartz with a thin skin of cordierite near a quartz vein. Such texture could result from isothermal decompression of the cooled crust. Alternatively and more possibly, cordierite could form from ingress of CO₂–H₂O rich fluid during terminal stage of cooling. Finally, sapphirine (Spr₄) and quartz show direct contact close to the quartz vein. Direct contact of such sapphirine and quartz represents textural disequilibrium as this particular quartz is introduced as a vein much later than the peak metamorphism but prior to the major foliation-forming deformation. Coarse sapphirine and vein quartz, therefore, accidentally came in contact with each other and persisted metastably. Therefore, though coexistence of sapphirine and quartz is considered to be a strong evidence for ultrahigh temperature condition, care should be taken to decipher their stable coexistence. Different types of textural relations involving this mineral pair could originate in a single rock, probably in different stages of its metamorphic history.     

Delineation of an exhumed intermediate-depth crustal fault in a collisional setting: An example from the Himalaya

The regionally prominent main boundary thrust (MBT) of the Himalayan fold-thrust belt in northwest India is typically defined by the presence of Proterozoic rocks in the hanging wall and Cenozoic rocks in the footwall. The present study focuses on identifying the MBT contact across Gambar River section in Himachal Pradesh, India, using alternative methodologies, such as the meter-scale litho-structural mapping, followed by detrital zircon U–Pb geochronology to precisely identify the thrust contact and provide insights on the deformation history of the MBT zone. We have identified a sharp change in the age (from ~600 to ~61 Ma) of the sedimentary units along a narrow zone in the study area by detrital zircon U–Pb geochronology using LA-ICP-MS. The sharp change in the detrital zircon U–Pb age data thus delineate the MBT occurring in the area along a < ~1 m thickness. The lithological assemblage and the age data indicate the unified maximum depositional age from ~700 to ~600 Ma for the hanging wall rocks, which have been equated with the Krol Group of the Lesser Himalayan Sequence (LHS). In comparison, the footwall rocks exhibit the maximum depositional age of ~61 Ma and have been equated with the Cenozoic Subathu Formation of the Sub-Himalayan Sequence (SHS).     

Zircon U–Pb geochronology of “Sashu mylonite”, eastern extension of Higo Plutono‐metamorphic Complex,Southwest Japan: Implication for regional tectonic evolution

Geochronological and geochemical studies reveal the possible origin of the restricted body of mylonite rocks occurring at the eastern edge of Kyushu Island, Japan, just in contact with the Sashu Fault, a part of the Paleo‐Median Tectonic Line (Paleo‐MTL). The LA‐ICP‐MS zircon U–Pb dating of the quartz diorite mylonite in this mylonitic body indicates a crystallization age of 114.0 ±1.7 Ma. Moreover, the two tonalite samples appear as thin layers within the Permian fine‐grained mafic mylonite; a part of the same body yields the age of 113.7 ±2.3 Ma and 116.9 ±1.3 Ma, with extremely low Th/U ratio. These quartz diorite mylonite and tonalite are consistent with the late Early Cretaceous magmatism and coeval metamorphism similar to those in the Higo Plutono‐metamorphic Complex in western Kyushu, Japan. This newly characterized complex occurs just south of the Cretaceous Sambagawa metamorphic rocks. The newly characterized mylonitic rocks are lying structurally above the Sambagawa Metamorphic Complex and are distributed along the Paleo‐MTL. The extension of the Higo Plutonometamorphic Complex, as well as the structural relationship between this complex and the Sambagawa Metamorphic Complex, is still controversial but holds a key to reconstruct the tectonic evolution of Southwest Japan during the Late Mesozoic to Early Cenozoic period. Hence, this article provides new insight into the reconstruction of the evolution history of East Asia as an active convergent margin.     

Development of bedforms due to waves blocked by a counter current

Experiments are conducted in a laboratory flume on the propagation of a surface wave against unidirectional flow with a sediment bed. This article presents the spatial variation of bedforms induced by the wave-blocking phenomenon by a suitably tuned uniform fluid flow and a counter-propagating wave. The occurrence of wave-blocking is confirmed by finding a critical wave frequency in a particular flow discharge in which the waves are effectively blocked and is established using the linear dispersion relation. The purpose of this work is to identify wave-blocking and its influence on the development of bedforms over the sediment bed. Interestingly bedform signatures are observed at a transition of bedforms in three zones, with asymmetric ripples having a steeper slope downstream face induced by the incoming current, followed by flat sand bars beneath the wave-blocking zone and more symmetric ripples below the wave-dominated region at the downstream. This phenomenon suggests that the sediment bed is segmented into three different regions of bed geometry along the flow. The deviations of mean flows, Reynolds stresses, turbulent kinetic energy, and power spectral density due to the wave-blocking phenomenon are presented along the non-uniform flow over sediment bed. The bottom shear stress, bed roughness and stochastic nature of the bedform features are also discussed. The results are of relevance to engineers and geoscientists concerned with contemporary process as well as those interested in the interpretation of palaeoenvironmental conditions from fossil bedforms. © 2019 John Wiley & Sons, Ltd.     

Large amplitude double layers in a dusty plasma with nonthermal electrons featuring Tsallis distribution

The problems of large amplitude double layers are discussed using Sagdeev’s pseudo-potential technique for a dusty plasma comprising two temperature isothermal ions and nonextensive nonthermal velocity distributed electron. For different sets of plasma parameter values, the Sagdeev potential V(?) has been plotted. It is found that nonextensive q parameter plays a significant role in determining the shape and size of large amplitude double layers. Also, it is observed that the existence of large amplitude double layers depends on different plasma parameters.     

Petrophysical properties of the Himalayan granitoids: Implication on composition and source

The paper reports the characterization of density, magnetic susceptibility, magnetic anisotropy, seismic wave velocities, attenuation as well as mineralogy and major element chemistry of the four generation of granitoids from the Indian Himalaya. Based on these petrophysical properties, only the Cretaceous granitoids of the Trans-Himalayan region by virtue of their mantle affinity and domination of magnetite and/or magnetite–ilmenite series qualify to be the I-type granitoid. On the other hand, rest of the 3 suites of granitoids have a crustal affinity and can be categorized as S-type granitoids enriched with ilmenite and/or hemo-ilmenite series. Beside this general classification, some anomalous petrophysical properties can be related to distinctive mineralogy, stages of magmatic crystallization, and intensity of deformation in different class of granitoids. For example; (i) presence of heavy minerals like hornblende and magnetite accounts for the significantly high density and seismic wave velocity of the Cretaceous granitoids; (ii) fractional crystallization of mantle melts leads to hornblende-rich granitoids (rich in magnetite) in the earlier stage where biotite-rich granitoids (low magnetite) crystallize in the later stage, thus explaining bimodal distribution of magnetic susceptibility in Cretaceous granitoids; (iii) in S-type granitoids, high quartz content (45%) account for the lowest density recorded in Saruna Proterozoic granitoids whereas high content of micaceous minerals reduce the seismic wave and are responsible for the lowest S-wave velocity in the Early Palaeozoic Mandi granitoids; (iv) further, the effect of texture is seen as varying attenuation character of P- and S-waves on grain size. In general, the higher the grain size, the greater the attenuation. Once again Cretaceous granitoids negate this well established relation. Incorporation of this anomalous dependence of physical properties on mineralogical, tectonic fracturing, texture will help the translation of geophysical maps to more a realistic region specific crustal tectonic evolution models.     

Modified theory of gravity and the history of cosmic evolution

A continuous transition from early Friedmann-like radiation era through to late time cosmic acceleration passing through a long Friedmann-like matter dominated era followed by a second phase of radiation era has been realized in modified theory of gravity containing a combination of curvature squared term, a linear term, a three-half term and an ideal fluid. Thus the history of cosmic evolution is explained by modified theory of gravity singlehandedly. The second phase of radiation-like era might provide an explanation to the hydrogen and helium reionization at low redshift.     

Bioremediation of salt affected soils using cyanobacteria in terms of physical structure,nutrient status and microbial activity

In present investigation, consortia of two indigenous heterocystous cyanobacteria, Nostoc ellipsosporum HH-205 and Nostoc punctiforme HH-206 isolated from a salt affected area of Hisar, Haryana (India) were used as biofertilizer in bioremediation of salt affected soils having high electrical conductivity (13.5 dS/m) and pH (8) with poor organic carbon (0.3%) as well as nitrogen content (0.008%). The experiments were conducted in a pot house for the period of 240 days. There was a significant (P < 0.05) increase in carbon, phosphate, nitrogen, potassium, magnesium, cation exchange capacity, mean weight diameter and hydraulic conductivity of soil with biofertilizer treatment whereas sodium ion and electrical conductivity were found to be decreased. Improvement in soil aggregation and stability due to increased soil microbial activities (dehydrogenase, invertase and phosphomonoesterase) were also observed. Significant increase in growth and yield of pearl millet–wheat crop was observed in amended pots even under low water regime. Thus, the indigenous cyanobacterial species show promise in effective exploitation for phytoremediation and improved productivity of saline soils under semi-arid condition.