High time resolution monitoring of tropospheric temperature with a Radio Acoustic Sounding System (RASS)

We have observed the time-height variation of the temperature field in the upper troposphere using a Radio Acoustic Sounding System (RASS) which consists of the MU radar and a high-power acoustic transmitter. The fast beam steerability of the MU radar has made it possible to measure temperature profiles in a fairly wide height range in the upper troposphere (5–11 km), even under intense wind conditions. Observations were continued for about 32 hr on 24–26 December, 1986 with a time-height resolution of 30 min and 150 m. During the observation period, the tropospheric jet was so intense that the acoustic wavefronts were severely distorted. Using wind velocity profiles observed by the MU radar we have numerically estimated the propagation of acoustic wavefronts, and further determined favorable pointing directions for the MU radar to receive significant backscattering from refractive index fluctuations produced by the acoustic waves. Conventional radiosonde soundings were carried out every 6 hr, which showed a temperature decrease of 4 K/day in the upper troposphere during the observation period. Temperature profiles taken by RASS agree well with the radiosonde results.     

Unified approach to amplitude attenuation and coda excitation in the randomly inhomogeneous lithosphere

A unified model is proposed for explaining the frequency dependent amplitude attenuation and the coda wave excitation on the basis of the single scattering process in the randomly inhomogeneous lithosphere. Adopting Birch's law and a direct proportion between density and wave velocity, we statistically describe the inhomogeneous medium by one random function characterized by the von Karman autocorrelation function. We calculate the amplitude attenuation from the solid angle integral of scattered wave energy on the basis of the Born approxiimation after subtracting the travel-time fluctuation effect caused by slowly varying velocity inhomogeneities. This subtraction is equivalent to neglect energy loss by scattering within a cone around the forward direction. The random inhomogeneity of the von Karman autocorrelation function of order 0.35 with the mean square fractional fluctuation of 7.2×10^–3 1.3×10^–2 and the correlation distance of 2.15.1 km well explains observed backward scattering coefficientg and the ratioQ _P ^–1 /Q _S ^–1 , and observed and partially conjecturedQ _S ^–1 for frequencies between 0.5 Hz and 30 Hz.     

A new technique for measuring diffusion coefficients of cations and anions in ionic crystals

A new technique has been developed for measuring the diffusion coefficient in ionic crystals. Based on Einstein's formula expressing the relation between diffusion coefficient and electric mobility, the electrical impedance of a diatomic ionic crystal is derived theoretically as a function of frequency of the applied electric field. In this method, the diffusion coefficients of both cations and anions are determined simultaneously by fitting the measured impedance to the theoretical relation. This method was applied to NaCl single crystals in the temperature range 370–780°C. The impedance was determined over the frequency range 0.01 Hz to 1 kHz, at constant temperature. The diffusion coefficients thus obtained for NaCl agree reasonably well with previous data by means of a radioactive isotope technique. The activation energies for Na⁺ and Cl^? obtained are 1.97±0.03 eV and 2.08±0.06 eV, respectively, in the intrinsic region, and 0.92±0.02 eV and 1.06±0.02 eV in the extrinsic region. It was discovered that there are diffusion blocks of approximately 2 μm width, which obstruct free migration of ions in a single crystal.     

Lermontovskoe Tungsten Skarn Deposit: the Oldest Mineralization in the Sikhote-Alin Orogen, Far East Russia

Abstract. Lermontovskoe tungsten skarn deposit in central Sikhote-Alin is concluded to have formed at 132 Ma in the Early Cretaceous, based on K-Ar age data for muscovite concentrates from high-grade scheelite ore and greisenized granite. Late Paleozoic limestone in Jurassic - early Early Cretaceous accretionary complexes was replaced during hydrothermal activity related to the Lermontovskoe granodiorite stock of reduced type. The ores, characterized by Mo-poor scheelite and Fe^3+- poor mineral assemblages, indicate that this deposit is a reduced-type tungsten skarn (Sato, 1980, 1982), in accordance with the reduced nature of the granodiorite stock.
The Lermontovskoe deposit, the oldest mineralization so far known in the Sikhote-Alin orogen, formed in the initial stage of Early Cretaceous felsic magmatism. The magmatism began shortly after the accretionary tectonics ceased, suggesting an abrupt change of subduction system. Style of the Early Cretaceous magmatism and mineralization is significantly different between central Sikhote-Alin and Northeast Japan; reduced-type and oxidized-type, respectively. The different styles may reflect different tectonic environments; compressional and extensional, respectively. These two areas, which were closer together before the opening of the Japan Sea in the Miocene, may have been juxtaposed under a transpressional tectonic regime after the magmatism.     

Non-destructive monitoring of trace element levels in short-tailed albatrosses (Phoebastria albatrus) and black-footed albatrosses (Phoebastria nigripes) from Torishima Island, Japan using eggs and blood

Concentrations of 18 trace elements (V, Cr, Mn, Co, Cu, Zn, Se, Rb, Sr, Mo, Ag, Cd, Sb, Cs, Ba, Hg, Tl and Pb) were determined in abandoned eggs of short-tailed albatrosses and abandoned eggs and blood of black-footed albatrosses from Torishima Island, Japan in 2002. Mercury concentration was highest among the toxic elements in egg content of both the two species. In some egg contents of black-footed albatrosses, Hg concentrations were higher than the threshold level that may cause decreased hatchability and aberrant nesting behavior in some avian species. Concentrations of Cd in egg content and Ba in egg content and shell increased with an increase in egg breadth/length ratio, whereas Hg in egg content showed an opposite trend in black-footed albatrosses. Since egg breadth/length ratio is known to increase with the age of mother bird, this result may imply that concentrations of these elements in eggs vary with age of mother bird. In blood of black-footed albatross chicks, concentration of Hg was highest among the toxic elements and the Hg concentration showed an increase in the later growth stages. In contrast, concentration of Sr in blood decreased with growth stage. Since the behaviour of Sr is similar to that of Ca in animals, it is conceivable that Sr was used along with Ca for the formation of bone.     

Rockfall hazard in the Daisekkei Valley, the northern Japanese Alps, on 11 August 2005

This paper describes a rockfall event in the Daisekkei Valley of Mount Shirouma-dake (2,932 m), the northern Japanese Alps. The rockfall occurred on a steep cliff comprising well-jointed felsites and produced debris of ≥8,000 m³. Most debris was deposited on an elongated snowpatch located immediately beneath the cliff, and it caused casualties among people who were trekking along a trail on the snowpatch. Additionally, a large rock block slipped 1 km on the snowpatch. The rockfall could have been due to the differential retreat of the rockwall, which contains areas of high- and low-density joints. Seasonal and diurnal freeze–thaw activities and snow avalanches and wash appear to be important factors responsible for the retreat. Although some rock blocks that can collapse further remain on the rockwall, the position of the mountain trail in the Daisekkei Valley is fixed. Fundamental reform of tourism systems for climbers, including education on natural hazards, is required.     

The 11 March 2011 Tohoku Tsunami Survey in Rikuzentakata and Comparison with Historical Events

On 11 March 2011, a moment magnitude M _w = 9.0 earthquake occurred off the Japan Tohoku coast causing catastrophic damage and loss of human lives. In the immediate aftermath of the earthquake, we conducted the reconnaissance survey in the city of Rikuzentakata, Japan. In comparison with three previous historical tsunamis impacting the same region, the 2011 event presented the largest values with respect to the tsunami height, the inundation area and the inundation distance. A representative tsunami height of 15 m was recorded in Rikuzentakata, with increased heights of 20 m around rocky headlands. In terms of the inundation area, the 2011 Tohoku tsunami exceeded by almost 2.6 times the area flooded by the 1960 Chilean tsunami, which ranks second among the four events compared. The maximum tsunami inundation distance was 8.1 km along the Kesen River, exceeding the 1933 Showa and 1960 Chilean tsunami inundations by factors of 6.2 and 2.7, respectively. The overland tsunami inundation distance was less than 2 km. The tsunami inundation height linearly decreased along the Kesen River at a rate of approximately 1 m/km. Nevertheless, the measured inland tsunami heights exhibit significant variations on local and regional scales. A designated “tsunami control forest” planted with a cross-shore width of about 200 m along a 2 km stretch of Rikuzentakata coastline was completely overrun and failed to protect the local community during this extreme event. Similarly, many designated tsunami shelters were too low and were overwashed by tsunami waves, thereby failing to provide shelter for evacuees—a risk that had been underestimated.     

Predicting the displacement of triple pendulum™ bearings in a full‐scale shaking experiment using a three‐dimensional element

The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum? (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.