Diatom-inference models for surface-water temperature and salinity developed from a 57-lake calibration set from the Sierra Nevada, California, USA

Physical, chemical, and biological data were collected from a suite of 57 lakes that span an elevational gradient of 1360 m (2115 to 3475 m a.s.l.) in the eastern Sierra Nevada, California, USA as part of a multiproxy study aimed at developing transfer functions from which to infer past drought events. Multivariate statistical techniques, including canonical correspondence analysis (CCA), were used to determine the main environmental variables influencing diatom distributions in the study lakes. Lakewater depth, surface-water temperature, salinity, total Kjeldahl nitrogen, and total phosphorus were important variables in explaining variance in the diatom distributions. Weighted-averaging (WA) and weighted-averaging partial least squares (WA-PLS) were used to develop diatom-based surface-water temperature and salinity inference models. The two best diatom-inference models for surface-water temperature were developed using simple WA and inverse deshrinking. One model covered a larger surface-water temperature gradient (13.7 °C) and performed slightly poorer (r² = 0.72, RMSE = 1.4 °C, RMSEP_jack = 2.1 °C) than a second model, which covered a smaller gradient (9.5 °C) and performed slightly better (r² = 0.89, RMSE = 0.7 °C, RMSEP_jack = 1.5 °C). The best diatom-inference model for salinity was developed using WA-PLS with three components (r² = 0.96, RMSE = 4.06 mg L^–1, RMSEP_jack = 11.13 mg L^–1). These are presently the only diatom-based inference models for surface-water temperature and salinity developed for the southwestern United States. Application of these models to fossil-diatom assemblages preserved in Sierra Nevada lake sediments offers great potential for reconstructing a high-resolution time-series of Holocene and late Pleistocene climate and drought for California.     

A subaqueous hazard map for earthquake-triggered landslides in Lake Zurich,Switzerland

The awareness of geohazards in the subaqueous environment has steadily increased in the past years and there is an increased need to assess these hazards in a quantitative sense. Prime examples are subaqueous landslides, which can be triggered by a number of processes including earthquakes or human activities, and which may impact offshore and onshore infrastructure and communities. In the literature, a plenitude of subaqueous landslide events are related to historical earthquakes, including cases from lakes in Switzerland. Here, we present an approach for a basin-wide earthquake-triggered subaquatic landslide hazard assessment for Lake Zurich, which is surrounded by a densely populated shoreline. Our analysis is based on high-resolution sediment-mechanical and geophysical input data. Slope stabilities are calculated with a grid-based limit equilibrium model on an infinite slope, which uses Monte Carlo sampled input data from a sediment-mechanical stratigraphy of the lateral slopes. Combined with probabilistic ground-shaking forecasts from a recent national seismic hazard analysis, subaquatic earthquake-triggered landslide hazard maps are constructed for different mean return periods, ranging from 475 to 9975 years. Our results provide a first quantitative landslide hazard estimation for the lateral slopes in Lake Zurich. Furthermore, a back-analysis of a case-study site indicates that pseudostatic accelerations in the range between 0.04 and 0.08 g were needed to trigger a well-investigated subaqueous landslide, dated to ~2210 cal. years B.P.     

The Footprint Database and Web Services of the Herschel Space Observatory

Data from the Herschel Space Observatory is freely available to the public but no uniformly processed catalogue of the observations has been published so far. To date, the Herschel Science Archive does not contain the exact sky coverage (footprint) of individual observations and supports search for measurements based on bounding circles only. Drawing on previous experience in implementing footprint databases, we built the Herschel Footprint Database and Web Services for the Herschel Space Observatory to provide efficient search capabilities for typical astronomical queries. The database was designed with the following main goals in mind: (a) provide a unified data model for meta-data of all instruments and observational modes, (b) quickly find observations covering a selected object and its neighbourhood, (c) quickly find every observation in a larger area of the sky, (d) allow for finding solar system objects crossing observation fields. As a first step, we developed a unified data model of observations of all three Herschel instruments for all pointing and instrument modes. Then, using telescope pointing information and observational meta-data, we compiled a database of footprints. As opposed to methods using pixellation of the sphere, we represent sky coverage in an exact geometric form allowing for precise area calculations. For easier handling of Herschel observation footprints with rather complex shapes, two algorithms were implemented to reduce the outline. Furthermore, a new visualisation tool to plot footprints with various spherical projections was developed. Indexing of the footprints using Hierarchical Triangular Mesh makes it possible to quickly find observations based on sky coverage, time and meta-data. The database is accessible via a web site http://herschel.vo.elte.hu and also as a set of REST web service functions, which makes it readily usable from programming environments such as Python or IDL. The web service allows downloading footprint data in various formats including Virtual Observatory standards.     

The Multi-Scale Structure of the Australian Cool Changes

Summary In Southern Australia summertime deep cold fronts are frequently preceded by a shallow cold frontal line connected to a prefrontal lower tropospheric trough. The advance of this line defines a “cool change” which in many cases causes severe weather events. The goal of this paper is to analyze the multi-scale structure of these cool changes using aircraft observations and synoptic-scale analyses. The aircraft measurements on cross-frontal tracks of horizontal lengths of up to 300 km are performed with an average resolution of 3 to 4 m along the track. Thus a multi-scale analysis from micro-scale events up to the synoptic-scale phenomena can be presented. All flights and thus all meso- and micro-scale analyses are performed over water only. The obviously very different characteristics of the cool change structure elements over land are not investigated. The synoptic analyses for one very typical case show a prefrontal trough as characterized by its position in relation to the main deep cold front, its source region in Western Australia and its extent to the southeast. Fields of strong wind shear, temperature gradients, vertical wind and Q-vectors are displayed. The meso-β-scale x, z-cross-sections derived from two aircraft missions (data of the second one in brackets) show: a shallow cold front with a 160 (60) km wide transition zone in which the near surface potential temperature drops rather steadily by 9 °C (20 °C); a shallow feeder flow topped by a strong inversion with a vertical gradient of potential temperature up to 5 °C/100 m between the top of the feeder flow at 400 (200) m and 1500 (700) m; a cross-frontal circulation expressed by the ageostrophic wind components u _ϕ,subscale and w with a center at 1200 m over the frontal edge of the feeder flow (for one mission only); a strong shear of the along-frontal wind component v _ϕ with a large increase of the negative v _ϕ-values with height, which very well fits to the synoptic-scale view of the wave structure of the geostrophic wind (well-known from the upper level synoptic charts) at different heights; a jet core of this along-frontal wind in the center of the cross-frontal circulation, again for one mission only. A very striking example of a micro-scale event is an approximately 1 km wide head of a frontal squall line. It shows dramatic changes of all meteorological parameters. The event is displayed in a horizontal domain of 4 km with full resolution (∼ 4 m). Derivatives of the measured parameters in the cross-frontal direction add information to the space series of the parameters themselves. Deformation frontogenesis of potential temperature and specific humidity show very large values on the scale resolved here. Fortunately the squall line could be sampled again at the same height, but in a somewhat degenerated state 1? h later. Received September 3, 1999 Revised December 14, 1999     

Macro- and Micro-Purge Soil-Gas Sampling Methods for the Collection of Contaminant Vapors

Purging influence on soil‐gas concentrations for volatile organic compounds (VOCs), as affected by sampling tube inner diameter and sampling depth (i.e., system volume) for temporary probes in fine‐grained soils, was evaluated at three different field sites. A macro‐purge sampling system consisted of a standard, hollow, 3.2‐cm outer diameter (OD) drive probe with a retractable sampling point attached to an appropriate length of 0.48‐cm inner diameter (ID) Teflon^® tubing. The macro‐purge sampling system had a purge system volume of 24.5 mL at a 1‐m depth. In contrast, the micro‐purge sampling systems were slightly different between the field sites and consisted of a 1.27‐cm OD drive rod with a 0.10‐cm ID stainless steel tube or a 3.2‐cm OD drive rod with a 0.0254‐cm inner diameter stainless steel tubing resulting in purge system volumes of 1.2 and 7.05 mL at 1‐m depths, respectively. At each site and location within the site, with a few exceptions, the same contaminants were identified in the same relative order of abundances indicating the sampling of the same general soil atmosphere. However, marked differences in VOC concentrations were identified between the sampling systems, with micro‐purge samples having up to 27 times greater concentrations than their corresponding macro‐purge samples. The higher concentrations are the result of a minimal disturbance of the ambient soil atmosphere during purging. The minimal soil‐gas atmospheric disturbance of the micro‐purge sampling system allowed for the collection of a sample that is more representative of the soil atmosphere surrounding the sampling point. That is, a sample that does not contain an atmosphere that has migrated from distance through the geologic material or from the surface in response to the vacuum induced during purging soil‐gas concentrations. It is thus recommended that when soil‐gas sampling is conducted using temporary probes in fine‐grained soils, the sampling system use the smallest practical ID soil‐gas tubing and minimize purge volume to obtain the soil‐gas sample with minimal risk of leakage so that proper decisions, based on more representative soil‐gas concentrations, about the site can be made.     

A clash of values and approaches: A case study of marine protected area planning in Mozambique

Many developing countries are expanding their network of Marine Protected Areas (MPAs) to meet ambitious marine conservation targets set globally and to develop tourism nationally. This study explores the human dimensions of MPA planning in Mozambique by engaging local resource users in a series of structured discussions about marine resource use, pressures on marine resources, ways to address such pressures, and the potential positive and negative impacts of MPAs on the management of marine resources and livelihoods, from a community perspective. Findings show that the groups and communities interviewed are at best ambivalent towards MPAs while at the same time supporting increased government regulation, including conventional fisheries management measures. The study suggests that without significant community involvement in the choice of marine conservation tools, the drive to establish MPAs to achieve biodiversity conservation and tourism development goals may be counterproductive, at least in terms of poverty alleviation and sustainable resource use. It argues that a wider range of marine conservation approaches and tools needs to be considered in addition to MPAs, taking into consideration local views and institutional capacities.     

Development of a chironomid-based air temperature inference model for the central Canadian Arctic

Subfossil midge remains were identified in surface sediment recovered from 88 lakes in the central Canadian Arctic. These lakes spanned five vegetation zones, with the southern-most lakes located in boreal forest and the northern-most lakes located in mid-Arctic tundra. The lakes in the calibration are characterized by ranges in depth, summer surface-water temperature (SSWT), average July air temperature (AJAT) and pH of 15.5 m, 10.60°C, 8.40°C and 3.69, respectively. Redundancy analysis (RDA) indicated that maximum depth, pH, AJAT, total nitrogen-unfiltered (TN-UF), Cl and Al capture a large and statistically significant fraction of the overall variance in the midge data. Inference models relating midge abundances and AJAT were developed using different approaches including: weighted averaging (WA), weighted averaging-partial least squares (WA-PLS) and partial least squares (PLS). A chironomid-based inference model, based on a two-component WA-PLS approach, provided robust performance statistics with a high coefficient of determination (r ² = 0.77) and low root mean square error of prediction (RMSEP = 1.03°C) and low maximum bias. The use of a high-resolution gridded climate data set facilitated the development of the midge-based inference model for AJAT in a region with a paucity of meteorological stations and where previously only the development of a SSWT inference model was possible. David Porinchu and Nicolas Rolland contributed equally to the work.     

Urban and rural dewfall,surface moisture,and associated canopy-level air temperature and humidity measurements for vancouver,canada

Canopy-level humidity is often less at night during fine weather in a mid-latitude city, compared to its rural surroundings. This feature has been attributed, in part, to reduced urban dew, but links are largely unproven, because urban dew data are rare. In this study, surface moisture (i.e., dew + guttation by blotting) and dewfall (by mini-lysimeter) were measured at rural and urban residential sites in Vancouver, Canada, during the summer of 1996. Air temperature and humidity were measured at both sites, and on rural-to-urban vehicle traverses. Weather and location effects were evident. Humidity data suggested the small (< 1 g m^–3) urban moisture excess observed on fine nights was linked to reduced urban dew. For grass, the frequency of moisture events, and surface moisture amounts, were similar for both sites. However, on grass, rural dewfall (mean=0.10 mm per night) was more than urban dewfall (mean=0.07 mm per night). On the other hand, data for a roof lysimeter (mean dewfall=0.12 mm per night) showed that an urban roof could rival rural grass as a favoured location for dewfall in Vancouver.