δ18O and δ13C in fossil shells of Radix sp. from the sediment succession of a dammed palaeo‐lake in the Yarlung Tsangpo valley,Tibet, China

A series of confirmed and suspected dammed palaeo‐lake sedimentary successions is scattered within the middle Yarlung Tsangpo valley in Tibet. However, the chronology, the genesis of the dam and its location, the water level of the dammed lake, the process of dam failure and the spatiotemporal relationships between the sedimentary successions remain controversial. Here, we focus on one sedimentary succession of the suspected dammed palaeo‐lake at Xigazê. We measured the grain‐size distribution, magnetic susceptibility, organic and inorganic carbon content, and δ¹³C_org and δ¹⁵N_total ratios of the sediments. In addition, we measured the δ¹⁸O_shell and δ¹³C_shell values of modern and fossil Radix sp. shells, and the δ¹⁸O_water and δ¹³C_DIC values of the ambient water with different hydrological regimes. The results indicate that the δ¹⁸O_shell values of modern Radix sp. and the δ¹⁸O_water of the ambient water body significantly depend on its hydrological status. In addition, a strong positive relationship was observed between δ¹⁸O_shell values of modern Radix sp. shells and the δ¹⁸O_water of the ambient water on the Tibetan Plateau. According to this correlation, the δ¹⁸O_water values of the palaeo‐water body are reconstructed using the δ¹⁸O_shell values of Radix sp. fossil shells in the Xigazê section. Further, based on the δ¹⁸O_shell values of fossil Radix sp., the reconstructed δ¹⁸O_water of the palaeo‐water body and the specific habitats of Radix sp., we infer that the sedimentary succession in the Xigazê broad valley was mainly formed within the backwater terminal zone of a dammed palaeo‐lake and that the elevation of the water level of the lake was approximately 3811 m a.s.l. AMS ¹⁴C dating indicates that the deposits of the dammed palaeo‐lake were formed at about 33–22 cal. ka BP. Finally, the presence of Radix sp. fossil shells within the Xigazê section suggests that Radix sp. survived the late Last Glacial Period on the Tibetan Plateau.     

In‐situ analysis of trace elements and Sr–Pb isotopes of K‐feldspars from Tongshankou Cu–Mo deposit,SE Hubei Province,China: Insights into early potassic alteration of the porphyry mineralization system

In the Tongshankou porphyry deposit (SE Hubei Province, South China), three types of K‐feldspars are recognized: (I) the phenocryst type in the porphyry that crystalized during the magmatic stage, (II) the megacryst type and (III) the vein type in the altered porphyry and orebody that was produced by hydrothermal fluids. A detailed in‐situ analysis of trace elements and Sr–Pb isotopes was carried out on K‐feldspars in an attempt to unravel their formation processes and to trace the element sources during potassic alteration. The Type III K‐feldspars show lower Sr contents and Sr‐isotope ratios but higher Pb contents and Pb‐isotope ratios than the Type I and II K‐feldspars, possibly reflecting a contribution from the country carbonate rocks with less radiogenic Sr but more radiogenic Pb sources, and indicate that the ore‐forming fluids and materials may have been partially derived from external sources such as the host sedimentary rocks during the early potassic alteration stage.     

Biotite Reference Materials for Secondary Ion Mass Spectrometry 18O/16O Measurements

Five new biotite reference materials were calibrated at the SwissSIMS laboratory (University of Lausanne) for oxygen isotope determination by secondary ion mass spectrometry (SIMS) and are available to the scientific community. The oxygen isotope composition of the biotites, UNIL_B1 to B5, was determined by laser‐heating fluorination to be 11.4 ± 0.11‰, 8.6 ± 0.15‰, 6.1 ± 0.04‰, 7.1 ± 0.05‰ and 7.6 ± 0.04‰, respectively. SIMS analyses on spots smaller than 20 μm gave a measurement repeatability of 0.3‰ (2 standard deviation, 2s). The matrix effect due to solid solution in natural biotite could be expressed as a linear function of X_Mg and X_F for biotite. No effect was found for different crystallographic orientations. SIMS analysis allows the oxygen isotope composition of biotite to be measured with a measurement uncertainty of 0.3–0.4‰ (2s) for biotites with similar major element compositions. A measurement uncertainty of 0.5‰ (2s) is realistic when F poor biotites (lower than 0.2% m/m oxides) within the compositional range of X_Mg of 0.3–0.9 were compared from different sessions. The linear correlation with F content offers a reasonable working curve for F‐rich biotites, but additional reference materials are needed to confirm the model.     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.     

Estimation of surface roughness (z0) over a stabilizing coastal dune field based on vegetation and topography

Accurate knowledge of the surface roughness and the resultant wind speed are important for many applications, such as climatic models, wind power meteorology, agriculture and erosion hazards, especially on sand dunes in arid and semi‐arid environments, where vegetation cover is scarce. In this study we aimed at quantifying the effects of vegetation cover and topography on surface roughness over a stabilizing dune field on the southern coast of Israel. Forty‐six wind measurements were made at various distances from the coastline, ranging from 10 to 2800 m, and z₀ values were calculated from the wind measurements based on the ratio between the wind gust and the average wind speed. We estimated vegetation cover using the soil adjusted vegetation index (SAVI) from Landsat satellite images for the upwind sector at various lengths, ranging from 15 to 400 m, and based on digital elevation models and differential GPS field measurements we calculated the topographic variable of the relative heights of the stations. z₀ values were positively correlated with the winter SAVI values (r = 0·87 at an upwind length of 200 m) and negatively correlated with the relative height (r = ?0·68 at an upwind length of 200–400 m for the inland dune stations). Using these variables we were able to create a map of estimated z₀ values having an accuracy of over 64%. Such maps provide a better understanding of the spatial variability in both wind speed and sand movement over coastal dune areas. Copyright © 2007 John Wiley & Sons, Ltd.     

Betrachtungen über die Grundschicht

Zusammenfassung 1. Es werden die einzelnen Vorgänge besprochen, die das eigentümliche Verhalten der Veränderlichkeit von Druck und Temperatur in ihrer vertikalen Verteilung erklären sollen. Wenn ein unteres an der Erdoberfläche vorhandenes Druckausgleichsniveau vorhanden ist und ein weiteres in grösserer Höhe, so müssen Temperaturänderungen in dem einen Niveau durch solche eines anderen ausgeglichen, kompensiert werden. Es wird gezeigt, dass dem kompensierenden Einfluss der mittleren und oberen Troposphäre ein kompensierender Einfluss der Kälte- und Wärmewellen aus dem Bereiche der Grundschicht entgegenwirkt, sodass letzten Endes das Druckausgleichsniveau nicht mehr am Erdboden liegt, sondern in eine Höhe verschoben wird, die der ungefähren Höhe der Grundschicht entspricht. — 2. Der Einfluss von Reibung und Konvektion auf die Bildung der Grundschicht wird besprochen. Die Reibung wirkt langsam und immer schichtweise. Die Konvektion wirkt rascher, aber zunächst immer nur lokal. Im Verlaufe längerer Zeit kann aber auch die Konvektion eine Homogenisierung der unteren Luftschichten bewirken, also eine Luftschicht von einem einheitlichen Charakter schaffen. Dieser Prozess wird noch verstärkt, wenn die Konvektion mit Kondensation verbunden ist. Jetzt ist eine weitere Ueberhöhung der Grundschicht möglich. Da dieser Prozess aber über weite Räume nicht von gleicher Grösse ist, wird diese Ueberhöhung vielfach gebietsweise verschieden sein. Die Grundschicht vom Böenwettertyp hat daher gewöhnlich keine einheitliche Oberfläche über weite Gebiete hinweg. — 3. Ein weiterer Faktor, der für die Bildung der Grundschicht von Bedeutung ist, ist die Strahlung. Da der Beitrag, den jeder der drei Faktoren (Reibung, Konvektion, Strahlung) zur Bildung der Grundschicht beisteuert, nicht errechnet werden kann, muss man sich zunächst mit einer qualititativen Abschätzung der Einflüsse der einzelnen an der Bildung der Grundschicht beteiligten Faktoren begnügen. Ein entsprechendes Schema wird vorgelegt und besprochen.

---

Summary 1. There are discussed individual proceedings which shall explain the characteristic behaviour of pressure, and temperature instability in their vertical distribution. When there exists equalization of pressure on a lower level near the ground, and again on a higher level, changes of temperature on one level will be compensated by such on another level. It is shown that the compensating influence of middle and upper troposphere is opposed by the compensating influence of cold, and heat waves from the ground layer, ultimately resulting in the removal of the level of pressure equalization from the ground to an altitude roughly corresponding to the height of ground layer. — 2. The influence of friction and convection on the formation of ground layer is discussed. While friction is acting slowly and by layers, convection is acting more rapidly, but only locally at first. In the long run however, also convection can produce homogeneity of the lower layers of the atmosphere, i. e. an atmospheric layer of uniform character. This process is being intensified when convection is associated with condensation. Then, another increase in height of the ground layer will be possible. However, as this process will not be of similar intensity over wide stages, the increase in height will vary locally. Therefore, generally the ground layer of the squally weather type will not possess a uniform surface extending over wide areas. — 3. Another important factor in the formation of ground layer is radiation. Since the share taken by each of the three factors (friction, convection, radiation) cannot be computed, one must be satisfied with qualitative valuation of the influence of the factors participating in the formation of ground layer. An appropriate scheme is submitted and discussed.

     

Devonian of the isle of Rügen

Summary In the Rügen area of northern Germany, Old Red Sandstones, ranging from Late Emsian to Givetian in age, unconformably overlie deformed Ordovician strata. The Middle Devonian Old Red passes conformably up into a Late Devonian carbonate facies and then into the Lower Carboniferous, apparently without a break.     

Evaluation of Sludge Digester Effluent as Feeding Solution for the Enrichment of Anammox Bacteria

The aim of this study is to evaluate the feasibility of sludge digester effluent as feeding solution to enrich anaerobic ammonium oxidation (anammox) bacteria. The performance of the two parallel pilot scale‐upflow packed bed anammox reactors (UPBAn1 and UPBAn2) are examined in terms of the enrichment of anammox bacteria. The control experiment is set up conducting synthetic wastewater as feeding solution in the UPBAn1 reactor whereas, the sludge digester effluent is fed to the nitritation reactor and then the partially nitrated digester effluent to the UPBAn2 reactor. Anammox activities are evaluated by mass balances based on ammonium (NH₄⁺), nitrite (NO₂^?), and nitrate (NO₃^?) analysis and NRR. Microbial community of anammox bacteria is analyzed using real‐time polymerase chain reaction (PCR). The results demonstrate that UPBAn 1 and UPBAn2 reactors are successfully enriched on days 64 and 40 with NRRs of 19.54 and 19.43 g N m^?3 per day, respectively. This study reveals that both synthetic wastewater and digester effluent are suitable for the enrichment of anammox bacteria; however, digester effluent as feeding solution for enrichment of anammox bacteria based on the ease of process control and process stability is more advisable.     

A semi‐distributed parallel‐type linear reservoir rainfall‐runoff model and its application in Taiwan

The main purpose of this paper is to introduce a semi‐distributed parallel surface rainfall‐runoff conceptual model. In this paper, a general solution of the instantaneous unit hydrograph (IUH) has been derived successfully for N linearly connected reservoirs, each having a different storage constant. The solution is a function of geomorphologic parameters, meteorologic factors and roughness coefficients. The model also takes into account the hydrologic response which is influenced by outflow downstream of a reservoir. For calibration, the shuffled complex evolution (SCE) algorithm is used to search for the global optimal parameters of the model. Because of the parallel structure, the mean roughness parameter of the channel becomes a “conceptual” parameter without a real physical meaning. To evaluate the adaptability of the model adopted, three watersheds around the city of Taipei in Taiwan were chosen to test the effectiveness of the model. The study provides an appropriate rainfall‐runoff model for planning flood mitigation in Taiwan. Copyright © 1999 John Wiley & Sons, Ltd.