Some applications of humidity profiles estimated from INSAT infra red digital cloud imagery data

Moisture profiles have been estimated over the region bounded by the latitudes 40°N and 40°S and longitudes 30°E to 130°E using INSAT digital infra red cloud imagery data. The representativeness of these profiles in representing moisture field associated with the development and movement of synoptic scale systems during the period September 15th, 1996 to March 31st, 1997 has been examined. It has been shown that the changes in the moisture field associated with the withdrawal of the southwest and northeast monsoons from the Indian sub-continent, development and movement of synoptic scale sytems (depressions, tropical cyclones and waves in easterlies) and equatorial troughs in the Indian Ocean could be clearly seen in humidity profiles. The initial development of tropical systems is first seen in the humidity field in the upper troposphere. These profiles could be used in monitoring the initial development and subsequent movement of tropical systems. Further the data on moisture distribution from the data gap regions of the Indian Ocean could be used as an additional source of moisture in numerical analysis and prognosis.     

Radon emanation of heterogeneous basin deposits in Kathmandu Valley,Nepal

Effective radium-226 concentration (EC_Ra) has been measured in soil samples from seven horizontal and vertical profiles of terrace scarps in the northern part of Kathmandu Valley, Nepal. The samples belong to the Thimi, Gokarna, and Tokha Formations, dated from 50 to 14 ky BP, and represent a diverse fluvio-deltaic sedimentary facies mainly consisting of gravelly to coarse sands, black, orange and brown clays. EC_Ra was measured in the laboratory by radon-222 emanation. The samples (n = 177) are placed in air-tight glass containers, from which, after an accumulation time varying from 3 to 18 days, the concentration of radon-222, radioactive decay product of radium-226 and radioactive gas with a half-life of 3.8 days, is measured using scintillation flasks. The EC_Ra values from the seven different profiles of the terrace deposits vary from 0.4 to 43 Bq kg^?1, with profile averages ranging from 12 ± 1 to 27 ± 2 Bq kg^?1. The values have a remarkable consistency along a particular horizon of sediment layers, clearly demonstrating that these values can be used for long distance correlations of the sediment horizons. Widely separated sediment profiles, representing similar stratigraphic positions, exhibit consistent EC_Ra values in corresponding stratigraphic sediment layers. EC_Ra measurements therefore appear particularly useful for lithologic and stratigraphic discriminations. For comparison, EC_Ra values of soils from different localities having various sources of origin were also obtained: 9.2 ± 0.4 Bq kg^?1 in soils of Syabru–Bensi (Central Nepal), 23 ± 1 Bq kg^?1 in red residual soils of the Bhattar-Trisuli Bazar terrace (North of Kathmandu), 17.1 ± 0.3 Bq kg^?1 in red residual soils of terrace of Kalikasthan (North of Trisuli Bazar) and 10 ± 1 Bq kg^?1 in red residual soils of a site near Nagarkot (East of Kathmandu). The knowledge of EC_Ra values for these various soils is important for modelling radon exhalation at the ground surface, in particular in the vicinity of active faults. Importantly, the study also reveals that, above numerous sediments of Kathmandu Valley, radon concentration in dwellings can potentially exceed the level of 300 Bq m^?3 for residential areas; a fact that should be seriously taken into account by the governmental and non-governmental agencies as well as building authorities.     

Geo-engineering properties of expansive soil treated with xanthan gum biopolymer

ABSTRACT

This paper presents the effectiveness of xanthan gum (XG) biopolymer in stabilising the expansive soil. The XG biopolymer is mixed with expansive soil in different proportions such as 0%, 0.2%, 0.5%, 0.8% and 1.0% by weight of the dry soil mass. The plasticity, compaction, swelling, compressibility, hydraulic conductivity, strength and durability characteristics of the treated and un-treated expansive soil are examined. Results show that the plasticity index of the treated soil mass initially increases but beyond 0.5% biopolymer addition it decreases sharply. The optimum moisture content and maximum dry density of treated soil, found out from light and heavy compaction tests, do not follow any definite trend. It is also found that increasing XG content increases compressibility slightly but, it reduces swelling pressure, differential free swelling value and hydraulic conductivity remarkably. On the other hand, time-dependent compressive strength and resistance to mass loss increases with increasing XG content. Microscopic examination confirms the formation of gel-like linkage, which brings about the modifications in the treated expansive soil.     

Why relatively fewer people died? The case of Bangladesh’s Cyclone Sidr

Cyclone Sidr, a Category IV storm, struck the southwestern coast of Bangladesh on November 15, 2007 killing 3,406 people. Despite a similar magnitude, Sidr claimed far fewer lives than Cyclone Gorky, also a Category IV storm, which struck Bangladesh in 1991 causing an estimated 140,000 fatalities. The relatively low number of deaths experienced with Sidr is widely considered the result of Bangladesh government’s efforts to provide timely cyclone forecasting and early warnings, and successful evacuation of coastal residents from the projected path of Cyclone Sidr. Using information collected from both primary and secondary sources, this study identified several other reasons for the unexpectedly lower mortality associated with Cyclone Sidr relative to Cyclone Gorky. Fewer casualties may be attributed to a number of physical characteristics of Cyclone Sidr, such as duration of the storm and storm surge, landfall time and site, varied coastal ecology, and coastal embankment. This article recommends improvements to the cyclone warning systems, establishment of more public cyclone shelters, and implementation of an education campaign in coastal areas to increase the utilization of public shelters for future cyclone events.     

Heavy metal content in the beach sediment with respect to contamination levels and sediment quality guidelines: a study at Kalpakkam coast,southeast coast of India

Socioeconomic developments and industrialization exert tremendous impact on beaches which is often neglected. Heavy metal (Cr, Mn, Co, Ni, Cu, Zn, Cd, and Pb) contents were estimated in the intertidal region from Kalpakkam to Mamallapuram (20 km), southeast coast of India covering seven locations. To evaluate the level of contamination of these metals; enrichment factor (EF), geoaccumulation index (I _geo), contamination factor (CF), pollution load index (PLI) and modified degree of contamination (mCd) were applied. The results were also compared with the sediment quality guidelines (SQGs) to find out the eco-toxicity level. Metal contents in the beach sediment were observed in the order: Fe > Al > Mn > Cr > Cu > Ni > Zn > Pb > Co > Cd. Grain size distribution showed medium to coarse nature of the sediment. Significant positive correlation was found among the metals indicating their common source of input. Based on EF, minor enrichment of Mn and Zn and moderately severe to severe enrichment of Cr, Cu, Pb and Cd were observed which was further confirmed by I _geo and CF values. Moreover, Mamallapuram showed a very high CF value for Cd (>6) indicating very high contamination accountable to anthropogenic sources. PLI and mCd in all the stations indicated unpolluted nature except M1 where the values pointed moderate degree of contamination. As per the SQGs, Ni and Cr values exceeded the probable effect limit value implying that these metals can have adverse impacts. None of the metals exceeded the effect range median indicating that the beach sediment is not very toxic.     

Impact of Doppler weather radar data on thunderstorm simulation during STORM pilot phase—2009

This study assesses the impact of Doppler weather radar (DWR) data (reflectivity and radial wind) assimilation on the simulation of severe thunderstorms (STS) events over the Indian monsoon region. Two different events that occurred during the Severe Thunderstorms Observations and Regional Modeling (STORM) pilot phase in 2009 were simulated. Numerical experiments—3DV (assimilation of DWR observations) and CNTL (without data assimilation)—were conducted using the three-dimensional variational data assimilation technique with the Advanced Research Weather Research and Forecasting model (WRF-ARW). The results show that consistent with prior studies the 3DV experiment, initialized by assimilation of DWR observations, performed better than the CNTL experiment over the Indian region. The enhanced performance was a result of improved representation and simulation of wind and moisture fields in the boundary layer at the initial time in the model. Assimilating DWR data caused higher moisture incursion and increased instability, which led to stronger convective activity in the simulations. Overall, the dynamic and thermodynamic features of the two thunderstorms were consistently better simulated after ingesting DWR data, as compared to the CNTL simulation. In the 3DV experiment, higher instability was observed in the analyses of thermodynamic indices and equivalent potential temperature (θ _e) fields. Maximum convergence during the mature stage was also noted, consistent with maximum vertical velocities in the assimilation experiment (3DV). In addition, simulated hydrometeor (water vapor mixing ratio, cloud water mixing ratio, and rain water mixing ratio) structures improved with the 3DV experiment, compared to that of CNTL. From the higher equitable threat scores, it is evident that the assimilation of DWR data enhanced the skill in rainfall prediction associated with the STS over the Indian monsoon region. These results add to the body of evidence now which provide consistent and notable improvements in the mesoscale model results over the Indian monsoon region after assimilating DWR fields.     

An integrated approach to investigate saline water intrusion and to identify the salinity sources in the Central Godavari delta, Andhra Pradesh, India

The Central Godavari delta is located along the Bay of Bengal Coast, Andhra Pradesh, India, and is drained by Pikaleru, Kunavaram and Vasalatippa drains. There is no groundwater pumping for agriculture as wells as for domestic purpose due to the brackish nature of the groundwater at shallow depths. The groundwater table depths vary from 0.8 to 3.4 m and in the Ravva Onshore wells, 4.5 to 13.3 m. Electrical Resistivity Tomography (ERT) surveys were carried out at several locations in the delta to delineate the aquifer geometry and to identify saline water aquifer zones. Groundwater samples collected and analyzed for major ions for assessing the saline water intrusion and to identify the salinity origin in the delta region. The results derived from ERT indicated low resistivity values in the area, which can be attributed to the existence of thick marine clays from ground surface to 12–15 m below ground level near the coast and high resistivity values are due to the presence of coarse sand with freshwater away from the coast. The resistivity values similar to saline water <0.01 Ω m is attributed to the mixing of the saline water along surface water drains. In the Ravva Onshore Terminal low resistivity values indicated up coning of saline water and mixing of saline water from Pikaleru drain. The SO ₄ ^?2 /Cl^?and Na⁺²/Cl^?ratios did not indicate saline water intrusion and the salinity is due to marine palaeosalinity, dilution of marine clays and dissolution of evaporites.     

Distribution of heavy minerals in Nizampatnam-Lankavanidibba coastal sands,Andhra Pradesh,East Coast of India

Heavy mineral analysis was carried out for the beach and fore dune sediments along 60 transects of Nizampatnam-Lankavanidibba coastal area. The heavy mineral assemblage in this area with decreasing abundance of opaques (Ilmenite + magnetite, 47.67%), pyriboles (20.35%), garnets (3.66%), epidote (3.23%) and with less than 3.0% concentration of sillimanite, zircon, staurolite, kyanite, apatite, spinel, monazite, biotite, topaz, leucoxene and chlorite. The heavy mineral concentrations are high in the finer fractions i.e., +120 and +230 (ASTM) than the coarse fraction (+60) of sand. In the seven sectors, heavy mineral assemblage is same but their concentrations are different. The sectors nearer to the river mouth contain high concentration of high specific gravity heavy minerals (ilmenite and magnetite) than sectors away from the river mouth. The redistribution of heavy minerals is controlled by creek dynamics, longshore currents, size and specific gravity of the heavy minerals.     

Magnetic Mapping of Banded Iron Formation of Sandur Schist Belt,Dharwar Craton,India

High ground magnetic anomalies are observed at western basin of the Sandur schist belt (SSB) near Muraripura village, Karnataka. Sources for these anomalies are inferred due to presence of exposed banded iron formations hosted by metabasalts, arenaous and argillaceous rocks associated with the Donimali Formation of the schist belt. Two varieties of BIF bands are observed in the study area viz. Band 1 and Band 2. The bands 1 and 2 are displaced by lateral strike-slip fault. Band 1 is dominantly composed of banded iron formation, rich in iron ore minerals and silica chert. Band 2 is largely composed of ferruginous quartzite and quartz arenites. Qualitative analysis of the magnetic data indicates that the study area can be divided into three lithologically important BIF/BQ formations. Spectral and quantitative analysis of the magnetic data indicates, the average depth of band 1 is 70 m and band 2 is 130 m. The magnetic data results are well correlated with chemical analysis of borehole and surface rock samples data.