Detection of the Long Period Long Duration (LPLD) Events in Time-and Frequency-Domain

Long Period Long Duration (LPLD) signals are unusual seismic events that can be observed during hydraulic fracturing. These events are very similar in appearance to tectonic tremors sequences, which were first observed in subduction zones. Their nature is not well known. LPLD might be related to the productivity of the reservoir. Different methods of the LPLD events’ detection recorded during hydraulic fracturing are presented. The author applied two methods for LPLD detection–Butterworth filtering and Continuous Wavelet Transform (CWT). Additionally, a new approach to LPLD events detection–instantaneous seismic attributes–was used, common in a classical seismic interpretation but not in microseismic monitoring.     

Shear Wave Splitting Analysis to Estimate Fracture Orientation and Frequency Dependent Anisotropy

Shear wave splitting is a well-known method for indication of orientation, radius, and length of fractures in subsurface layers. In this paper, a three component near offset VSP data acquired from a fractured sandstone reservoir in southern part of Iran was used to analyse shear wave splitting and frequency-dependent anisotropy assessment. Polarization angle obtained by performing rotation on radial and transverse components of VSP data was used to determine the direction of polarization of fast shear wave which corresponds to direction of fractures. It was shown that correct implementation of shear wave splitting analysis can be used for determination of fracture direction. During frequencydependent anisotropy analysis, it was found that the time delays in shearwaves decrease as the frequency increases. It was clearly demonstrated throughout this study that anisotropy may have an inverse relationship with frequency. The analysis presented in this paper complements the studied conducted by other researchers in this field of research.     

Scaling Analysis of Time Distribution between Successive Earthquakes in Aftershock Sequences

The earthquake inter-event time distribution is studied, using catalogs for different recent aftershock sequences. For aftershock sequences following the Modified Omori’s Formula (MOF) it seems clear that the inter-event distribution is a power law. The parameters of this law are defined and they prove to be higher than the calculated value (2–1/p). Based on the analysis of the catalogs, it is determined that the probability densities of the inter-event time distribution collapse into a single master curve when the data is rescaled with instantaneous intensity, R(t; M _th ), defined by MOF. The curve is approximated by a gamma distribution. The collapse of the data provides a clear view of aftershock-occurrence self-similarity.     

Regional Variations of the <Emphasis Type="Italic">ω</Emphasis>-upper Bound Magnitude of GIII Distribution in the Iranian Plateau

The Iranian Plateau does not appear to be a single crustal block, but an assemblage of zones comprising the Alborz—Azerbaijan, Zagros, Kopeh—Dagh, Makran, and Central and East Iran. The Gumbel’s III asymptotic distribution method (GIII) and maximum magnitude expected by Kijko—Sellevoll method is applied in order to check the potentiality of the each seismogenic zone in the Iranian Plateau for the future occurrence of maximum magnitude (M_max). For this purpose, a homogeneous and complete seismicity database of the instrumental period during 1900–2012 is used in 29 seismogenic zones of the examined region. The spatial mapping of hazard parameters (upper bound magnitude (ω), most probable earthquake magnitude in next 100 years (M₁₀₀) and maximum magnitude expected by maximum magnitude estimated by Kijko—Sellevoll method (max M_{K ? S}^max) reveals that Central and East Iran, Alborz and Azerbaijan, Kopeh—Dagh and SE Zagros are a dangerous place for the next occurrence of a large earthquake.     

Digitized Database of Old Seismograms Recorder in Romania

The aim of this paper is to describe a managing system for a unique Romanian database of historical seismograms and complementary documentation (metadata) and its dissemination and analysis procedure. For this study, 5188 historical seismograms recorded between 1903 and 1957 by the Romanian seismological observatories (Bucharest-Filaret, Foc?ani, Bac?u, Vrincioaia, Câmpulung-Muscel, Ia?i) were used. In order to reconsider the historical instrumental data, the analog seismograms are converted to digital images and digital waveforms (digitization/ vectorialisation). First, we applied a careful scanning procedure of the seismograms and related material (seismic bulletins, station books, etc.). In a next step, the high resolution scanned seismograms will be processed to obtain the digital/numeric waveforms. We used a Colortrac Smartlf Cx40 scanner which provides images in TIFF or JPG format. For digitization the algorithm Teseo2 developed by the National Institute of Geophysics and Volcanology in Rome (Italy), within the framework of the SISMOS Project, will be used.     

Long-term Geomechanical Observation in the Jeroným Mine

Geomechanical measurements have been carried out in the medieval Jeroným Mine since 2001. At first quarterly observation and later also continual monitoring by distributed measurement network were used. The network includes a number of different sensors that have been installed in selected places of underground spaces. There have not been any manifestations documenting dangerous changes of stability during the period of monitoring (2001–2015). The results of accomplished measurements from all convergence profiles confirm the total stability of all underground spaces. However, a number of places have been documented as potentially unstable. Measured values of selected parameters are presented in the paper, namely, movements along fractures, changes of stress tensor and fluctuations in the level of mine water table.     

Enhancement of Seismic Data Processing and Interpretation of Fracture Zones on the Upper Part of Granitic Basement in Cuu Long Basin,Vietnam

The fractured granite basement is the primary oil and gas reservoir in the Cuu Long Basin, Vietnam. Due to the complexity of this nonlayered unconventional target, combined with complicated fault and fracture systems, the seismic data quality near and within the basement section is very low. For this reason, it is important to apply improved seismic data processing workflows, filtering and migration techniques, as wells as attribute processing methods to enhance the imaging quality.Our studies show that applying different types of filters, including the f-k, Radon transform and Tau-P, improves signal to noise ratio, removing multiples, revealing basement’s top and its related fractured and fault zones. In addition, the application of multi-arrival-solution migration algorithms, such as Kirchhoff Migration and Controlled Beam Migration, provides improved imaging for identifying basement top and faults and fractures within the basement. Furthermore, the application of seismic attributes such as curvature, apparent dip, or energy gradient, is important in locating faults and fractures, whereas mapping of intensity and orientation of such structures assists the delineation of “sweet spots” and assists the planning of exploration.     

Coseismic displacement estimate of the 2013 <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>7.0 Lushan,China earthquake based on the simulation of near-fault displacement field

Usually, GPS observation provides direct evidence to estimate coseismic displacement. However, GPS stations are scattered, sparse and cannot provide a detailed distribution of coseismic displacement. Strong ground motion records share the same disadvantages as GPS in estimating coseismic displacement. Estimations from InSAR data can provide displacement distributions; however, the resolution of such methods is limited by the analysis techniques. The paper focuses on estimating the coseismic displacement of the M _S7.0 Lushan earthquake on April 20, 2013 using a simulation of the wave field based on the elastic wave equation instead of a quasi-static equation. First, the media and source models were constructed by comparing the simulated velocity and the record velocity of the ground motion. Then simulated static displacements were compared with GPS records. Their agreement validates our results. Careful analysis of the distribution of simulated coseismic displacements near the fault reveals more details of the ground motion. For example, an uplift appears on the hanging wall of the fault, rotation is associated with the horizontal displacement, the fault strike and earthquake epicenter provide the main control on motion near the faults, and the motion on the hanging wall is stronger than that on the footwall. These results reveal additional characteristics of the ground motion of the Lushan earthquake.     

Colloidal Stability and Toxicity of Gold Nanoparticles and Gold Chloride on <Emphasis Type="Italic">Chlamydomonas reinhardtii</Emphasis>

Here we have examined interactions of gold nanoparticles differing in primary particle size and coating with the green algae Chlamydomonas reinhardtii as function of the colloidal stability of the particles in the experimental media used for toxicity studies. Interactions of dissolved Au³⁺ ions with algae were also examined. Included endpoints were photosynthetic yield and algal growth. Morphological and structural effects were examined microscopically and by flow cytometry. The results indicate no significant toxicity of gold nanoparticles to C. reinhardtii. Analysis of published data suggests toxicity of gold nanoparticles on algal growth to relate rather to particular coatings than to the gold core.     

Is tidal forcing critical to trigger large Sumatra earthquakes?

Complexity in the earthquake mechanism is manifested in different forms such as fractal distribution, clustering of seismicity, etc., and characterized as critical phenomenon. Occurrences of earthquakes generally represent the state of metastable equilibrium. The Andaman–Sumatra subduction zone is one of the most seismically active corridors (possibly in metastable state) in the world. Recently, the region faced three major earthquakes of magnitude more than 8.5 (M ~ 9.1 on December 26, 2004; M ~ 8.6 on March 28, 2005; M ~ 8.6 on April 11, 2012). Researchers have suggested multiple causes of earthquake generation in this region including the one with possible correlation of tidal stresses with earthquake occurrences. The latter issue, however, has been hotly debated in view of the fact that a small stress generated due to tidal forcing cannot cause such a bigger magnitude earthquake. We study here the impact of tidal forcing on critically generated earthquake phenomena. We examined the statistical behavior of recurrence time interval of earthquakes using the available data for period of about 40 years from 1973 to 2013. We constrain the simple empirical toy model using the concept of catastrophe theory to evaluate the impact of small tidal forcing on the critical state of earthquakes occurrences. In addition to the major role of Helmholtz free energy during the plate motion, our analysis suggests that the stability and critical behavior of the earthquake in Sumatra region could be associated with tidal forcing, however, only for triggering of some of the “Catastrophic–Chaotic” earthquake phenomenon.