Influence of physico-mechanical properties of Indian dimension stones on cutting rate of diamond wire saw

Cutting performance of diamond wire saw is a key factor influencing mine planning, production scheduling, and equipment selection for dimension stone quarries. It is normally measured in terms of cutting rate. Rock samples collected from various granite and marble quarries in India were tested in laboratory to determine their physico-mechanical properties. Cutting rate of diamond wire saw was measured in the field studies during the actual cutting process in quarries. Using these laboratory determined properties and the cutting rate, a multiple linear regression model has been developed to predict the cutting rate of diamond wire saw. Physico-mechanical properties of rocks determined in laboratory are used as independent variables and cutting rate as predictor variable in the regression model. The study indicates that the cutting rate increases with a decrease in most of the hardness and strength parameters of rock. The final model is tested for its goodness of fit indicating a significant linear relation between cutting rate and physico-mechanical properties, namely tensile strength, slake durability index, and Cerchar hardness index with regression coefficient of 94%. The resulting model can be used suitably for different types of hard to medium hard and soft dimension stones. The generalized model for estimating the cutting rate becomes a handy tool for mining engineers to work out operating efficiency, expenses, planning etc. of the dimension stone block cutting.     

Geotechnical investigation of the El-Elb dam site,northwest Riyadh,Saudi Arabia,using 2D resistivity and ground-penetrating radar techniques

In the present study, the existence of cavities, voids, and fractures was verified at the site of the El-Elb Dam, which is located to the northwest of Riyadh City across Wadi Hanifa, using 2D electrical resistivity tomography (ERT) and ground-penetrating radar (GPR) techniques. For this purpose, four ERT profiles were measured on the downstream side of the El-Elb Dam using the Syscal Pro Switch-72 resistivity meter. In addition, a GPR survey using a 400-MHz antenna and a SIR-3000 instrument was conducted along five profiles above the stilling basins on the downstream side of the dam and one radar profile was measured outside the stilling basins area across the course of the wadi. The resultant geophysical data were interpreted with the aid of information from a field-based structural and stratigraphic evaluation of the outcropped bedrock on the banks of the wadi course. The analysis of the inverted ERT and filtered radar sections revealed several resistivity and electromagnetic reflection anomalies that are identified laterally and vertically across the measured sections. These anomalies indicate the presence of fractures and karst features affected the limestone bedrock in the dam site. These near-surface karstified and fractured strata represent a critical hazard to the structural safety of the dam.     

Geothermal energy potential of Tulsishyam thermal springs of Gujarat,India

Tulsishyam thermal springs are located in the Saurashtra region of Gujarat, India with discharge temperatures varying from 39 to 42 °C. The pH of these thermal springs varies from 7.1 to 7.4, indicating neutral character. Though these thermal springs propagate through the near surface layer of Deccan basalt, detailed geochemical analysis of the thermal waters using Piper diagram suggests that the water is interacting with the granitic basement rock. Silica and cation geothermometry estimates have reservoir temperature in the range of 138 to 207 °C categorizing it into a low to moderate enthalpy geothermal system. Furthermore, the area has high heat flow values of 53–90 mW/m² because of shallow Moho depth. The prevailing conditions suggest that the geothermal energy can potentially be exploited through an enhanced geothermal system (EGS). The study also indicates different mineral phases that may precipitate out of water during exploitation of geothermal energy and it should be taken into account while designing an EGS for the area.     

Hydrogeochemical Characterization and Groundwater Quality of Jamshedpur Urban Agglomeration in Precambrian Terrain,Eastern India

This paper reports petrography, geochemistry and Rb-Sr age data on the rare metal bearing Neoarchean fertile (Nb-Ta) granite at Allapatna and elucidates its petrogenesis and role in Nb-Ta-Li-Be mineralization. The Allapatna granite (AG) intrudes the Tonalitic-Trondhjemitic - Granodioritic (TTG) Peninsular Gneiss and analysed SiO₂ (72.3-75.6 wt%), K₂O (4.0-5.7wt%), Na2O (3.0-4.4wt%), CaO (0.7-1wt%), MgO (0.13-0.25wt%) and K₂O/Na₂O (>1) indicating evolved nature. The presence of muscovite, biotite and garnet in the mode, peraluminous nature and high initial ⁸⁷Sr/⁸⁶Sr ratio (0.7284±0.0083) attest to their S-type characteristics. Varying Nb/Ta ratio and high Li with moderate abundance of Cs further indicate affinity to Li-Cs-Ta (LCT) type granite-pegmatite system. TheAG showing whole rock Rb-Sr isochron age of 2803± 68 Ma, is the oldest reported fertile granite in India parental to rare metal pegmatites hosting Nb-Ta, Be, and Li resources. Partial melting of a mixed source consisting of both basement TTG rocks and metapelites has generated such type of granitic magma. Fractionation of such granitic magma possibly has given rise to the rare metal (Ta-Nb-Li-Be) bearing pegmatites intruding the nearby schist belt.     

Classification and Potential Utilization of Eocene Coals of Meghalaya,North East India

In the present study, petrographic and geochemical investigation of Meghalayan coal deposits have been carried out to classify these coals in terms of rank, type and grade, using Indian and International classification schemes. Based on petrographic and geochemical characteristics, an attempt has also been made to identify the potential utilization of Meghalayan coals for various industrial applications. According to the study, these coals have been classified as sub-bituminous C to high volatile bituminous in rank, vitric in type and clean to ashy in grade. Considering their hydrocarbon potential, these coals are suitable for liquefaction and gasification.     

Soil Erosion Susceptibility Assessment of the Lower Himachal Himalayan Watershed

Assessment of erosion status of a watershed is an essential prerequisite for integrated watershed management. It not only assists in chalking out suitable soil and water conservation measures to arrest erosion and conserve water but also helps in devising best management practices to enhance biomass production in watersheds. Keeping this in view, the present study has been undertaken by involving geospatial-statistical techniques to determine the critical and priority areas for soil and water conservation in Suketi watershed of the lower Himachal Himalayan region. A novel weighted sum analysis technique was used for ranking each of hydrological unit by obtaining the weightages from various morphometric parameters. This technique offers dynamic, effective and sustainable approach over traditional prioritization methods in which significance of each parameter were considered equally. Considering this approach, sub-watersheds were delineated into low, medium and high priority zones. The results illustrate that about 52 % of sub-watersheds of Suketi watershed are in moderate to high erosion and runoff susceptible zones. Therefore, these potential areas can be considered for preferential soil and water conservation planning. The results obtained from the study will be useful for various stakeholders such as agriculturists, water resource managers, conservation measures planners and decision policy makers for better management practices and decision making. The geospatial-statistical technique can be used for effective estimation of erosion status of watersheds leading to watershed prioritization for taking up soil and water conservation measures in watershed systems. Finally, this technique can be very useful in remote, rugged and inaccessible watersheds with absence of soil erosion and runoff monitoring.     

A Preliminary Evaluation on the Prospects of Hydrocarbon Potential in the Carbonaceous Shales of Spiti and Chikkim Formations,Tethys Himalaya,India

In the present investigation, an attempt has been made to explore the possibility of hydrocarbon prospects in the carbonaceous shale deposits of Spiti and Chikkim formations exposed in the Spiti valley of the Tethys Himalaya. Twenty samples, collected from successive levels of these litho-units, have been subjected to maceral analysis, Rock-Eval Pyrolysis and six samples to Fourier Transform Infra-red Spectroscopy (FTIR) and nuclear magnetic resonance (NMR) analyses. The study reveals the presence of mainly kerogen-III type of organic matter but some of the shale samples have shown a good amount of total organic carbon (TOC) to the tune of 3.19% which is sufficient to produce hydrocarbon. The results indicate the presence of methane occurring as free and fixed hydrocarbon in the shale samples. Few levels are especially rich in hydrocarbon. They have shown encouraging results with potential for generating liquid as well as lighter hydrocarbon. The data is also supported by the FTIR and NMR studies.     

Geochemical Characterization and Controlling Factors of Chemical Composition of Spring Water in a Part of Eastern Himalaya

This paper focuses on the suitability of spring water for drinking and irrigation purposes in a part of eastern Himalaya, south Sikkim. There are many anthropogenic and geogenic factors contributing as a source of major cations and anions in the spring water. The spring water chemistry show a variation in EC, pH, TDS, Temperature, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe²⁺, Pb, Mn, Cu, HCO₃^-, Cl^-, PO₄^3-, NO₃^-, F^- and SO₄^2-. Mainly two types of water quality indexing has been used, one for suitability of spring water for drinking purposes and the other for irrigation purposes. For drinking purposes, Piper diagram used for determination of water type, water quality index (WQI) for quality monitoring and saturation index for mineral dissolution in water. % Na, RSC (Residual Sodium Carbon) and SAR (sodium absorption ratio) have been used for irrigation suitability. Piper diagram shows that CaHCO₃ type of water was dominant in the study area. The WQI depicted excellent category and SAR, percent sodium and RSC (Residual Sodium Carbon) depict excellent, good and permissible category for irrigation purposes. Principle component analysis (PCA) was used to determine the major influencing factor responsible for the variability in the parameters analysed of spring water.     

Late Glacial–Holocene record of benthic foraminiferal morphogroups from the eastern Arabian Sea OMZ: Paleoenvironmental implications

The Arabian Sea is characterized today by a well-developed and perennial oxygen minimum zone (OMZ) at mid-water depths. The Indian margin where the OMZ impinges provides sediment records ideal to study past changes in the OMZ intensity and its vertical extent in response to the changes of monsoon-driven primary productivity and intermediate water ventilation. Benthic foraminifera, depending upon their adaptation capabilities to variation in sea floor environment and microhabitat preferences, develop various functional morphologies that can be potentially used in paleoenvironmental reconstruction. In this study, we analysed benthic foraminiferal morphogroups in assemblage records of the last 30 ka in a sediment core collected from the lower OMZ of the Indian margin (off Goa). In total, nine morphogroups within two broadly classified epifaunal and infaunal microhabitat categories are identified. The abundance of morphogroups varies significantly during the late Glacial, Deglacial and Holocene. It appears that monsoon wind driven organic matter flux, and water column ventilation governing the OMZ intensity and sea-bottom oxygen condition, have profound influence on structuring the benthic foraminiferal morphogroups. We found a few morphogroups showing major changes in their abundances during the periods corresponding to the northern hemisphere climatic events. Benthic foraminifera with planoconvex tests are abundant during the cold Heinrich events, when the sea bottom was oxygenated due to a better ventilated, weak OMZ; whereas, those having tapered/cylindrical tests dominate during the last glacial maximum and the Holocene between 5 and 8 ka BP, when the OMZ was intensified and poorly ventilated, leading to oxygen-depleted benthic environment. Characteristically, increased abundance of taxa with milioline tests during the Heinrich 1 further suggests enhanced ventilation attributed probably to the influence of oxygen-rich Antarctic Intermediate Water (AAIW).