Red Sea faulting and salt diapirism as a potential geotechnical hazard in Jazan,southwest Saudi Arabia: inferences from gravity data

Natural Hazards - The main objective of this study is to detect the subsurface extension of salt diapirs and structural deformations in the city of Jazan and its suburbs using gravity data. Salt...     

Quality of GPS point positioning by TI 4100 receiver

The quality of absolute positioning by the Global Positioning System, using the TI 4100 receiver is investigated. Using 30 min of pseudo-range measurements, the derived coordinates of four tracking stations are estimated with standard errors of the order of 1–9 m. The paper points out that point-positioning users should be aware of the quality of positions and to some extent of the various sources of error.     

A structural synthesis of the Proterozoic Arabian-Nubian Shield in Egypt

Detailed structural geological and related studies were carried out in a number of critical areas in the Proterozoic basement of eastern Egypt to resolve the structural pattern at a regional scale and to assess the general characteristics of tectonic evolution, orogeny and terrane boundaries. Following a brief account of the tectonostratigraphy and timing of the orogenic evolution, the major structural characteristics of the critical areas are presented. Collisional deformation of the terranes ended about 615-600 Ma ago. Subsequent extensional collapse probably occurred within a relatively narrow time span of about 20 Ma (575 – 595 Ma ago) over the Eastern Desert and was followed by a further period of about 50 Ma of late to post-tectonic activity. The regional structures originated mainly during post-collisional events, starting with those related to extensional collapse (molasse basin formation, normal faulting, generation of metamorphic core complexes). Subsequent NNW-SSE shortening is documented by large-scale thrusting (towards the NNW) and folding, distributed over the Eastern Desert, although with variable intensity. Thrusts are overprinted by transpression, which was localized to particular shear zones. Early transpression produced, for example, the Allaqi shear zone and final transpression is documented in the Najd and Wadi Kharit-Wadi Hodein zones. Two terrane boundaries can be defined, the Allaqi and South Hafafit Sutures, which are apparently linked by the high angle sinistral strike-slip Wadi Kharit-Wadi Hodein shear zone with a tectonic transport of about 300 km towards the W/NW. In general, the tectonic evolution shows that extensional collapse is not necessarily the final stage of orogeny, but may be followed by further compressional and transpressional tectonism. The late Pan-African high angle faults were reactivated during Red Sea tectonics both as Riedel shears and normal faults, where they were oriented favourably with respect to the actual stress regime.     

An Experiment Using the High Resolution Eta and WRF Models to Forecast Heavy Precipitation over India

In the present study using the Weather Research and Forecasting (WRF) and Eta models, recent heavy rainfall events that occurred (i) over parts of Maharastra during 26 to 27 July, 2005, (ii) over coastal Tamilnadu and south coastal Andhra Pradesh during 24 to 28 October, 2005, and (iii) the tropical cyclone of 30 September to 3 October, 2004/Monsoon Depression of 2 to 5 October 2004, that developed during the withdrawal phase of the southwest monsoon season of 2004 have been investigated. Also sensitivity experiments have been conducted with the WRF model to test the impact of microphysical and cumulus parameterization schemes in capturing the extreme weather events. The results show that the WRF model with the microphysical process and cumulus parameterization schemes of Ferrier et al. and Betts-Miller-Janjic was able to capture the heavy rainfall events better than the other schemes. It is also observed that the WRF model was able to predict mesoscale rainfall more realistically in comparison to the Eta model of the same resolution.     

Hydrogeologic Units Of Lebanon

Based on geomorphologic and hydrogeologic characteristics of its territory, Lebanon is divided into three provinces: the West Lebanon province, the Bekaa province, and the East Anti-Lebanon province. These provinces are subdivided into smaller hydrogeologic units, the basins and subbasins. Significant features used in the subdivision are faults, relief, anticlinal axes, river channels, and water divides. Recharge to groundwater is a percentage of the intake area, the percipitation rate over this area, and the infiltration rate of outcropping rocks. The amounts of recharged water over the three provinces are 1609, 914, and 19 Mm³, respectively. Discharge is surface water from springs and water wells along the Lebanese coast. The discharge from the Lebanese rivers exceeds 3700 Mm³/year, an appreciable amount of which comes from natural springs. The quantity of groundwater pumped by wells or flowing into neighboring countries and to the sea as submarine springs, may exceed 800 Mm³/year.     

Geochemical Aspects of Hypogene Hydrothermal Alteration Zones in the Chol-qeshlaghi Area, NW Iran: Constrains on REEs

Chol-qeshlaghi altered area lies in the northwestern part of the post-collisional Urumieh-Dokhtar magmatic arc, NW Iran. Pervasive silicic, argillic, phyllic and propylitic altered zones appears to be intimately affiliated to the fluids derivative of upper Oligocene Khankandi granodiorite. This paper is dedicated to the identification of geochemical characteristics of hydrothermal alterations, focusing on the determination of the mass gains and losses of REEs, to gain significant insights regarding the chemical exchanges prevailed between the host rocks and hydrothermal fluids. The low pH and high activity of SO_4~(-2) ligands in silicic alteration fluids, resulting in depletion of entire REEs. Decreasing of LREEs appeared in argillic zone may attributed to reduce in adsorption ability of clay minerals in low pH; whereas HREEs enrichment in phyllic zone was inclined to put it down to the abundance of sericite(± Fe oxides). A significant reduction of Eu/Eu* ratio in silicic zone can be attributed to negligible sulfides and clay minerals as some effective agents in adsorption of released Eu~(+2). Factors such as changes in pH, the abundance of absorptive neomorph mineral phases, activity of ligands play an important role in controlling the distribution and concentration of REEs in Chol-qeshlaghi alteration system.     

The isotopic composition of carbon in the Alberta oil sand

The carbon isotopic ratios obtained from Athabasca bitumen, asphaltene and maltene have the same value $\text{δ}{}^{13}\text{C}\text{= ?29.6}\text{per ml}$. The corresponding values in the Cold Lake deposits are ?30.6, ?30.0 and ?31.6 per ml. The ratios determined for methane collected from the oil sand and its fractions are about 15 per ml lower than the above values. It appears that the Athabasca and Cold Lake Reservoirs have similar histories.     

Extended Finite Element Method for the Analysis of Discontinuities in Rock Masses

The strength and deformability of rock mass primarily depend on the condition of joints and their spacing and partially on the engineering properties of rock matrix. Till today, numerical analysis of discontinuities e.g. joint, fault, shear plane and others is conducted placing an interface element in between two adjacent rock matrix elements. However, the applicability of interface elements is limited in rock mechanics problems having multiple discontinuities due to its inherent numerical difficulties often leading to non-convergent solution. Recent developments in extended finite element method (XFEM) having strong discontinuity imbedded within a regular element provide an opportunity to analyze discrete discontinuities in rock masses without any numerical difficulties. This concept is based on partition of unity principle and can be used for cohesive rock joints. This paper summarizes the mathematical frameworks for the implementation of strong discontinuities in 3 and 6 nodded triangular elements and also provides numerical examples of the application of XFEM in one and two dimensional problems with single and multiple discontinuities.     

Biostratigraphy of oligocene succession in the High Folded Zone,Sulaimani, Kurdistan region,Northeastern Iraq

Oligocene and Lower Miocene sediments from High Folded Zone of Iraqi Zagros have been studied paleontologically at south of Sulaimaniyah, Kurdistan Region, NE Iraq. The identified fauna are consisted of (25) genera and species of benthonic and (16) species of planktonic foraminifera. The fauna comprises relatively abundant foraminiferal assemblages of moderate diversity. Based on the stratigraphic distribution of these species, two biozones have been recognized which are Nummulites—Rotalia and Globoquadrina dehiscens zones. These biozones indicate that the studied sections of Basara and Khewata are of Late Oligocene–Early Miocene age. Based on the microfossils, it has been found that the age of sediments is equivalent to or represents Anah and Serikagni Formations. Some previous studies described Oligocene rocks (Kirkuk Group) as interior sag basin. In the present study, the occurrence of the group inside High Folded Zone and its rich fauna content are used for the discussion of the sag basin versus normal marine water.     

Modeling of strong motion generation areas of the 2011 Tohoku,Japan earthquake using modified semi-empirical technique

Modification in the semi-empirical technique for the simulation of strong ground motion has been introduced to incorporate the strong motion generation areas (SMGA) in the modeled rupture plane. Strong motion generation areas identified within the rupture plane of the Tohoku earthquake of March 11, 2011 (M _w = 9.0), have been modeled using this modified technique. Two different source models having four and five SMGAs, respectively, are considered for modeling purpose. Strong motion records using modified semi-empirical technique have been simulated at two near-field stations located at epicentral distance of 137 and 140 km, respectively, using two different source models. Comparison of the observed and simulated acceleration waveforms is made in terms of root mean square error (RMSE) at both stations. Minimum root mean square error of the waveform comparison has been obtained at both the stations for source model having five SMGAs. Simulations from same rupture model have been made at other four stations lying at epicentral distance between 154 and 249 km. Comparison of observed and simulated records has been made in terms of RMSE in acceleration records, velocity records and response spectra at each six station. Simulations have been made at six other stations to obtain distribution of peak ground acceleration and peak ground velocity with hypocentral distance. Peak ground acceleration and velocity from simulated and observed records are compared at twelve stations surrounding the source of Tohoku earthquake. Comparison of waveforms and parameters extracted from observed and simulated strong motion records confirms the efficacy of the developed modified technique to model earthquake characterized by SMGAs.