CLEAN: project overview on CO2 large-scale enhanced gas recovery in the Altmark natural gas field (Germany)

The joint research project CLEAN was conducted in the years 2008?C2011 by a German research and development (R&D) alliance of 16 partners from science and industry. The project was set-up as pilot project to investigate the processes relevant to enhanced gas recovery (EGR) by the injection of CO₂ into a subfield of the almost depleted Altmark natural gas field. Despite the setback that permission for active injection was not issued by the mining authority during the period of the project, important results fostering the understanding of processes linked with EGR were achieved. Work carried out led to a comprehensive evaluation of the EGR potential of the Altmark field and the Altensalzwedel subfield in particular. The calculated safety margins emphasize that technical well integrity of the 12 examined boreholes is given for EGR without a need for any further intervention. The laboratory and field tests confirm that the Altensalzwedel subfield is suitable for the injection of 100,000?t of CO₂. Numerical simulations provide sound predictions for the efficiency and safety of the EGR technology based on the CO₂ injection. The development and testing of different monitoring techniques facilitate an improved surveying of CO₂ storage sites in general. The CLEAN results provide the technological, logistic and conceptual prerequisites for implementing a CO₂-based EGR project in the Altmark and provide a benchmark for similar projects in the world.     

Impact of shore-parallel breakwaters on the microtidal coast of Hammam-Lif (North-East of Tunisia)

The Hammam Lif coast (North-East of Tunisia) suffered from erosion mainly after the storm that damaged the zone in 1981. To protect it, eight shore-parallel breakwaters were built. The present study is interested in presenting the effect of the protection works on the coastline behavior by using aerial photographs geo-referenced by the digital photogrammetric method and empirical relationships. The successive breakwaters made a general accretion with formation of seven tombolos and salient. The response of the coast to these structures was related to the characteristics of these latter (length, distance to coast, and spacing). The effectiveness of such protection works is shown by the evaluation of the accretion areas formed behind them. The breakwaters which are the longest, less distant from the shoreline, and less spaced formed well-developed tombolos. Whereas, the structures which are short, very far from the coastline, and far from each other caused very small tombolos and even a salient.     

Using Two-Point Set Statistics to Estimate the Diameter Distribution in Boolean Models with Circular Grains

This paper deals with the counting and measuring of overlapping circular objects in binary images, a problem that arises in the mineral processing industry when estimating the distribution of bubble diameters in flotation cells in order to predict the geometallurgical performance of the flotation process. By viewing the images as realizations of a stationary planar Boolean model with circular grains and by using two-point set statistics, it is possible to jointly estimate the average number of objects per unit area and their diameter distribution. When applied to real and simulated images, this method is shown to give accurate estimates, to be robust to the presence of noise contaminating the images and of moderate drifts in the number of objects per unit area, and to speed up the processing time with respect to currently used methods. Combined, these properties serve to make the method suitable for an on-line monitoring of the flotation process.     

Feasibility of geoelectrical monitoring and multiphase modeling for process understanding of gaseous CO2 injection into a shallow aquifer

Potential pathways in the subsurface may allow upwardly migrating gaseous CO₂ from deep geological storage formations to be released into near surface aquifers. Consequently, the availability of adequate methods for monitoring potential CO₂ releases in both deep geological formations and the shallow subsurface is a prerequisite for the deployment of Carbon Capture and Storage technology. Geoelectrical surveys are carried out for monitoring a small-scale and temporally limited CO₂ injection experiment in a pristine shallow aquifer system. Additionally, the feasibility of multiphase modeling was tested in order to describe both complex non-linear multiphase flow processes and the electrical behavior of partially saturated heterogeneous porous media. The suitability of geoelectrical methods for monitoring injected CO₂ and geochemically altered groundwater was proven. At the test site, geoelectrical measurements reveal significant variations in electrical conductivity in the order of 15?C30?%. However, site-specific conditions (e.g., geological settings, groundwater composition) significantly influence variations in subsurface electrical conductivity and consequently, the feasibility of geoelectrical monitoring. The monitoring results provided initial information concerning gaseous CO₂ migration and accumulation processes. Geoelectrical monitoring, in combination with multiphase modeling, was identified as a useful tool for understanding gas phase migration and mass transfer processes that occur due to CO₂ intrusions in shallow aquifer systems.     

Combined L1/L2 Kalman filter-based tracking scheme for weak signal environments

A Kalman filter-based method combining the energy of both L1 C/A and L2C GPS signals in a combined tracking loop method to enhance performance under adverse conditions is developed. Standard tracking methods and the ionospheric effect on GPS signals are reviewed and compared to a new Kalman filter that simultaneously estimates delay, phase and total electron content by combining L1 C/A and L2C code and phase discriminator outputs. The new filter is tested and compared to standard methods for tracking L1 C/A and L2C using both simulated and real data. The new method is found to have improved sensitivity of 3 dB compared to standard L1 tracking and 4.5 dB compared to standard L2C tracking while at the same time providing an accurate estimate of the total electron content along the signal path.     

VLBI-derived troposphere parameters during CONT08

Time-series of zenith wet and total troposphere delays as well as north and east gradients are compared, and zenith total delays (ZTD) are combined on the level of parameter estimates. Input data sets are provided by ten Analysis Centers (ACs) of the International VLBI Service for Geodesy and Astrometry (IVS) for the CONT08 campaign (12?C26 August 2008). The inconsistent usage of meteorological data and models, such as mapping functions, causes systematics among the ACs, and differing parameterizations and constraints add noise to the troposphere parameter estimates. The empirical standard deviation of ZTD among the ACs with regard to an unweighted mean is 4.6?mm. The ratio of the analysis noise to the observation noise assessed by the operator/software impact (OSI) model is about 2.5. These and other effects have to be accounted for to improve the intra-technique combination of VLBI-derived troposphere parameters. While the largest systematics caused by inconsistent usage of meteorological data can be avoided and the application of different mapping functions can be considered by applying empirical corrections, the noise has to be modeled in the stochastic model of intra-technique combination. The application of different stochastic models shows no significant effects on the combined parameters but results in different mean formal errors: the mean formal errors of the combined ZTD are 2.3?mm (unweighted), 4.4?mm (diagonal), 8.6?mm [variance component (VC) estimation], and 8.6?mm (operator/software impact, OSI). On the one hand, the OSI model, i.e. the inclusion of off-diagonal elements in the cofactor-matrix, considers the reapplication of observations yielding a factor of about two for mean formal errors as compared to the diagonal approach. On the other hand, the combination based on VC estimation shows large differences among the VCs and exhibits a comparable scaling of formal errors. Thus, for the combination of troposphere parameters a combination of the two extensions of the stochastic model is recommended.     

The economics of climate change impacts and policy benefits at city scale: a conceptual framework

Cities are particularly vulnerable to climate change and climate extremes in part because they concentrate many activities, people and wealth in limited areas. As a result they represent an important scale for assessment and understanding of climate change impacts. This paper provides a conceptual and methodological framework for urban economic impact assessment of climate change. The focus of the paper is on model-based analysis of future scenarios, including a framing of uncertainty for these projections, as one valuable input into the decision-making process. The paper highlights the main assessment difficulties, methods and tools, and selected examples across these areas. A number of challenges are unique to climate change impact assessment and others are unique to the problem of working at local scales. The paper also identifies the need for additional research, including the need for more integrated and systemic approaches to address climate change as a part of the urban development challenge as well as the need to assess the economic impacts of climate change and response policy at local scale.     

Evolution of anthropogenic and biomass burning emissions of air pollutants at global and regional scales during the 1980�C2010 period

Several different inventories of global and regional anthropogenic and biomass burning emissions are assessed for the 1980?C2010 period. The species considered in this study are carbon monoxide, nitrogen oxides, sulfur dioxide and black carbon. The inventories considered include the ACCMIP historical emissions developed in support of the simulations for the IPCC AR5 assessment. Emissions for 2005 and 2010 from the Representative Concentration Pathways (RCPs) are also included. Large discrepancies between the global and regional emissions are identified, which shows that there is still no consensus on the best estimates for surface emissions of atmospheric compounds. At the global scale, anthropogenic emissions of CO, NO_x and SO₂ show the best agreement for most years, although agreement does not necessarily mean that uncertainty is low. The agreement is low for BC emissions, particularly in the period prior to 2000. The best consensus is for NO_x emissions for all periods and all regions, except for China, where emissions in 1980 and 1990 need to be better defined. Emissions of CO need better quantification in the USA and India for all periods; in Central Europe, the evolution of emissions during the past two decades needs to be better determined. The agreement between the different SO₂ emissions datasets is rather good for the USA, but better quantification is needed elsewhere, particularly for Central Europe, India and China. The comparisons performed in this study show that the use of RCP8.5 for the extension of the ACCMIP inventory beyond 2000 is reasonable, until more global or regional estimates become available. Concerning biomass burning emissions, most inventories agree within 50?C80%, depending on the year and season. The large differences between biomass burning inventories are due to differences in the estimates of burned areas from the different available products, as well as in the amount of biomass burned.     

Past connections and present similarities in slave ownership and fossil fuel usage

The first part of the paper demonstrates the connection between the abolition of slavery and the Industrial Revolution: steam power changed the perception of labour; new techniques facilitated diffusion of pro-abolition pamphlets; fewer threats to basic existence resulting from industrial advances fostered sensibilities and moral standards toward abolitionism; and, through industrial development, the North grasped victory in the American Civil War. The second part presents similarities between societies in the past that have used slave labour and those in the present that use fossil fuels. It argues that slaves and fossil-fuelled machines play(ed) similar economic and social roles: both slave societies and developed countries externalise(d) labour and both slaves and modern machines free(d) their owners from daily chores. Consequently, we are as dependent on fossil fuels as slave societies were dependent on bonded labour. It also suggests that, in differing ways, suffering resulting (directly) from slavery and (indirectly) from the excessive burning of fossil fuels are now morally comparable. When we emit carbon dioxide at a rate that exceeds what the ecosystem can absorb, when we deplete non-renewable resources, we indirectly cause suffering to other human beings. Similarly, cheap oil facilitates imports of goods from countries with little social protection and hence help externalise oppression. The conclusion draws on the lessons which may be learned by Climate Change campaigners from the campaigns to abolish slavery: environmental apathy can be opposed effectively if we learn from what worked in the fight against this inhuman institution.     

Improving a tree-ring reconstruction from west-central Scandinavia: 900?years of warm-season temperatures

Dendroclimatological sampling of Scots pine (Pinus sylvestris L.) has been made in the province of J?mtland, in the west-central Scandinavian mountains, since the 1970s. The tree-ring width (TRW) chronology spans several thousand years and has been used to reconstruct June?CAugust temperatures back to 1632 bc. A maximum latewood density (MXD) dataset, covering the period ad 1107?C1827 (with gap 1292?C1315) was presented in the 1980s by Fritz Schweingruber. Here we combine these historical MXD data with recently collected MXD data covering ad 1292?C2006 into a single reconstruction of April?CSeptember temperatures for the period ad 1107?C2006. Regional curve standardization (RCS) provides more low-frequency variability than ??non-RCS?? and stronger correlation with local seasonal temperatures (51% variance explained). The MXD chronology shows a stronger relationship with temperatures than the TRW data, but the two chronologies show similar multi-decadal variations back to ad 1500. According to the MXD chronology, the period since ad 1930 and around ad 1150?C1200 were the warmest during the last 900?years. Due to large uncertainties in the early part of the combined MXD chronology, it is not possible to conclude which period was the warmest. More sampling of trees growing near the tree-line is needed to further improve the MXD chronology.