Generalized diffraction‐stack migration and filtering of coherent noise

We reformulate the equation of reverse‐time migration so that it can be interpreted as summing data along a series of hyperbola‐like curves, each one representing a different type of event such as a reflection or multiple. This is a generalization of the familiar diffraction‐stack migration algorithm where the migration image at a point is computed by the sum of trace amplitudes along an appropriate hyperbola‐like curve. Instead of summing along the curve associated with the primary reflection, the sum is over all scattering events and so this method is named generalized diffraction‐stack migration. This formulation leads to filters that can be applied to the generalized diffraction‐stack migration operator to mitigate coherent migration artefacts due to, e.g., crosstalk and aliasing. Results with both synthetic and field data show that generalized diffraction‐stack migration images have fewer artefacts than those computed by the standard reverse‐time migration algorithm. The main drawback is that generalized diffraction‐stack migration is much more memory intensive and I/O limited than the standard reverse‐time migration method.     

Occurrence of persistent organic pollutants in marine fish from the Natuna Island,South China Sea

Five marine fish species were collected from the Natuna Island, South China Sea to investigate the occurrence of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane and its metabolites (DDTs). Concentrations of PBDEs, PCBs, and DDTs in marine fish ranged from 2.85 to 7.82, 14.3 to 48.1, and 7.99 to 40.3 ng/g lipid weight, respectively. Higher concentrations of PBDEs, PCBs, and DDTs were observed in Snakefish (Trachinocephalus myops), which might be attributed to their different feeding and living habits. PCBs were the predominant POPs in all marine fish, followed by DDTs and PBDEs. BDE 47 and PCB 153 were the predominant congener of PBDEs and PCBs, respectively. Compositional distribution of DDTs indicated the possible presence of fresh input sources around the Natuna Island. The ratios of o,p′-DDT/p,p′-DDT being less than 1 in fish samples suggested that DDT contributions from dicofol seemed considerably low. New input sources of DDT in South China Sea are worth further research.     

土层分层参数不确定时对二维工程场址地震动影响分析

工程场地地震安全性评价中计算二维复杂场地地震反应分析时,如采用一维等效线性化分析模型会带来较大的误差,而直接采用二维的非线性模型在技术上还存在一定的困难和不合理性。目前工程中多采用对一维分析结果进行二维修正的思想给出设计地震动及反应谱。然而在建立二维分析模型时,由于勘测条件的限制使模型建立出现很多不确定性。基于以往提出的二维复杂工程场址设计地震动的修正分析思想,建立了几种可能且工程认可的二维复杂场地模型,主要研究不同分层特征模型及土层剪切波速这一物理参数不确定时对设计地震动的影响,进一步考虑不同场地类别下,不同二维分层模型及土体物理参数对地震动的影响。根据分析结果提出了不同类别场地下,方便且合理建立二维复杂场地地震动分析模型的方法,为实际工程中模型的建立及参数的选取提供一些参考。     

Design,simulation, and large‐scale testing of an innovative vibration mitigation device employing essentially nonlinear elastomeric springs

This study proposes an innovative passive vibration mitigation device employing essentially nonlinear elastomeric springs as its most critical component. Essential nonlinearity denotes the absence (or near absence) of a linear component in the stiffness characteristics of these elastomeric springs. These devices were implemented and tested on a large‐scale nine‐story model building structure. The main focus of these devices is to mitigate structural response under impulse‐like and seismic loading when the structure remains elastic. During the design process of the device, numerical simulations, optimizations, and parametric studies of the structure‐device system were performed to obtain stiffness parameters for the devices so that they can maximize the apparent damping of the fundamental mode of the structure. Pyramidal elastomeric springs were employed to physically realize the optimized essentially nonlinear spring components. Component‐level finite element analyses and experiments were conducted to design the nonlinear springs. Finally, shake table tests using impulse‐like and seismic excitation with different loading levels were performed to experimentally evaluate the performance of the device. Experimental results demonstrate that the properly designed devices can mitigate structural vibration responses, including floor acceleration, displacement, and column strain in an effective, rapid, and robust fashion. Comparison between numerical and experimental results verified the computational model of the nonlinear system and provided a comprehensive verification for the proposed device. Copyright © 2014 John Wiley & Sons, Ltd.     

Regional grain size variations in aeolian sediments along the transition between Tibetan highlands and north‐western Chinese deserts – the influence of geomorphological settings on aeolian transport pathways

Sediment distribution is investigated applying grain size analysis to 279 surface samples from the transitional zone between high mountains (Qilian Shan) and their arid forelands (Hexi Corridor) in north‐western China. Six main sediment types were classified. Medium scale (10³ m) geomorphological setting is carefully considered as it may play an important role concerning sediment supply and availability. A tripartite distribution of sedimentological landscape units along the mountain to foreland transition is evident. Aeolian sediments (e.g. loess and dune sands) are widespread. They are used to identify aeolian transport pathways. The mU/fS‐ratio (5–11 µm/48–70 µm) among primary loess opposes the two grain size fractions being most sensitive to varying accumulation conditions. The first fraction is attributed to long‐distance transport in high suspension clouds whereas the latter represents local transport in saltation mode. The ratio shows strong correlation with elevation (R² = 0.77). Thus, it indicates a relatively higher far‐traveled dust supply in mountainous areas (>3000 m above sea level [a.s.l.]) compared to the foreland. The contribution of westerlies to high mountain loess deposits is considered likely. Hereby, the influence of the geomorphological setting on grain size composition of aeolian sediments becomes apparent: the contribution from distant dust sources is ubiquitous in the study area. However, the far‐distance contribution may be reduced by the availability of fine sand provided in low topography settings. Plain foreland areas support fine sand deflation from supplying river beds, allowing the formation of sandy loess in foreland areas and intramontane basins. In contrast, high mountain topography inhibits strong sand deflation into loess deposits. Eastern parts of the Hexi Corridor show higher aeolian sand occurrence. In contrast, the western parts are dominated by gravel gobi surfaces. This is attributed to higher sand supply in eastern parts provided by the Badain Jaran Desert and fluvial storages as sand sources. Copyright © 2014 John Wiley & Sons, Ltd.     

宽频带地震台网在滑坡地质灾害监测预报中的应用

在千将坪滑坡前地震动事件分析基础上,总结滑坡前滑坡体内部岩体形变和破裂所产生地震信号的典型特征,并建立宽频带地震台,对金坪子滑坡体和早谷田危岩体进行监测实验,提取基岩类、土质类和危岩体类3种基本物质组成滑坡的微振动前兆信息特征,为地震台网在滑坡监测预报中的应用推广和监测预报系统软件的研制奠定基础.根据测震学原理,研发滑坡监测分析系统软件（Smas）,可为滑坡大规模活动前快速预警.     

Earthquake engineering research needs in light of lessons learned from the 2011 Tohoku earthquake

Earthquake engineering research and development have received much attention since the first half of the twentieth century. This valuable research presented a huge step forward in understanding earthquake hazard mitigation, which resulted in appreciable reduction of the effects of past earthquakes. Nevertheless, the 2011 Tohoku earthquake and the subsequent tsunami resulted in major damage. This paper presents the timeline of earthquake mitigation and recovery, as seen by the authors. Possible research directions where the authors think that many open questions still remain are identified. These are primarily based on the important lessons learned from the 2011 Tohoku earthquake.     

A contrast of two typical LUCC processes and their driving forces in oases of arid areas: A case study of Sangong River Watershed at the northern foot of Tianshan Mountains

Aerial photographs taken in 1978 and 1987, Landsat TM images in 1998 as well as soil, hydrology and socio-economic data for the oases in Sangong River Watershed were processed by Remote Sensing (RS) and Geographic Information System (GIS). There are two typical agricultural land uses in oases, Farm-based Land Use with large-scale intensified agricultural activities (FLU) and Household Responsibility-based Land Use with small-scale activities (HRLU). The Index Model of Land Use/Land Cover Change (LUCC), Weighted Index Sum (WIS) and logistic stepwise regression model were established to contrast the two typical LUCC processes and their driving forces. The land use patterns were dominated by cropland and grassland for the entire region, and cropland, residential and industrial land were increasing stably. In the HRLU areas, woodland and grassland declined dramatically, but in the FLU areas, grassland decreased only by 12.0%, whereas woodland increased by 13.7%. LUCC was stronger in the earlier stage (1978–1987) than in the later stage (1987–1998) for the entire region. LUCC was more intense in the HRLU areas than in the FLU areas during the entire period (1978–1998). Policy was a key factor in the land use change, and water resources were a precondition in land use. Under the control of policy and water resources, the main human driving factors included population and economy, and the main natural restrictions were soil fertility and groundwater depth. Human driving factors controlled the land change in the HRLU areas, but natural restriction factors dominated in the FLU areas. In the mean time, intensification of LUCC in the region had some spatiotemporal implications with a fluctuation of impact factors.