空间智能:地理信息科学的新进展

在总结多年来研究GIS智能计算的理论与实践基础上,提出地理信息科学发展的新方向:空间智能.空间智能强调发现与应用空间模式,以增强GIS处理复杂数据和解决复杂问题的能力.空间智能主要的技术体系由空间分析、空间优化和空间模拟三大模块构成,其技术基础包括空间统计与索引、智能代理、高级启发式,以及数学规划等系列智能技术.由于空间智能融合了机器学习、统计分析和人工智能等多个学科理论,面向解决实际工程需求中大量存在的复杂时空问题,因此理论上具有广阔的发展空间,实践上也有重大的应用需求.随着空间智能体系的完善和技术的进一步成熟,它将在实际应用中具有巨大的价值.     

无棱镜技术在电厂施工土方量测量中的应用

随着全站仪在测量中的广泛应用,测量的精度有了很大的提高.特别是无棱镜技术的发展,改变了以往的测量手段和方法,提高了工作的效率.土方量测量是施工过程中不可避免的,为此本文介绍无棱镜测量技术在洛河电厂施工过程中测量土方量的应用情况,通过对比实验,我们对无棱镜测量技术工作效率和成果精度以及适用条件进行分析.     

基于GPS的短基线定向测量及精度分析

介绍了利用GPS载波相位测量技术进行短基线定向的基本方法,推导了估计GPS短基线定向的精度公式,得到了对于边长400～700 m的基线可以达到±(1"～2")的方位精度.     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

Benthic nutrient fluxes in the intertidal flat within the Changjiang （Yangtze River） Estuary

In an annual cycle from March 2005 to February 2006, benthic nutrient fluxes were measured monthly in the Dongtan intertidal flat within the Changjiang （Yangtze River） Estuary. Except for NH4^＋, there always showed high fluxes from overlying water into sediment for other four nutrients. Sediments in the high and middle marshes, covered with halophyte and consisting of macrofauna, demonstrated more capabilities of assimilating nutrients from overlying water than the low marsh. Sampling seasons and nutrient concentrations in the overlying water could both exert significant effects on these fluxes. Additionally, according to the model provided by previous study, denitrification rates, that utilizing NO3- transported from overlying water （Dw） in Dongtan sediments, were estimated to be from -16 to 193 μmol·h^-1·m^-2 with an average value of 63 μmol·h^-1·m^-2 （n=18）. These estimated values are still underestimates of the in-situ rates owing to the lack of consideration of DN, i.e., denitrification supported by the local NO3^- production via nitrification.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

甘肃王河金矿床地质特征及找矿方向

王河金矿床是李坝金矿田的组成部分。矿床产于秦岭造山带泥盆纪浅变质碎屑岩中,区域地质构造较复杂,岩浆活动频繁且强烈,是一受断裂、岩浆活动和蚀变带控制的蚀变岩型（工业类型为徽细粒浸染型）金矿。通过对矿床地质特征、控矿因素及找矿标志的研究认为,已知矿体深部及西部找矿潜力很大,应进一步开展找矿工作。     

老松公路延吉段K64+300～K64+900边坡稳定性评价及治理措施

对老松公路10标边坡开挖后的稳定性分析表明,地表及地下水是影响其稳定性的重要因素,排水不畅使边坡体饱水处于欠安全状态,稳定性难以保证.针对该边坡体的特点,采用了支撑盲沟和排水盲沟联合作用并结合坡面防护的处治措施,疏干坡体内地表及地下水,增大抗滑力,达到了提高边坡稳定性,保护生态环境,美化公路的目的.     

地下水土石油类污染修复技术途径

石油工业在开采、加工、运输、储备过程中石油及其初加工产品泄漏,进入环境造成污染。本文根据国内外现有异位修复技术和原位修复技术研究成果,提出“加强场地调查,有效控制污染源,阻断污染途径,同时开展受污染地下水土修复,优化组合多种修复技术方法”路线,表明可修复地下水土石油类有机污染。