Laboratory measurement of P-wave velocity in crustal and upper mantle xenoliths from Ichino-megata, NE Japan: ultrabasic hydrous lower crust beneath the NE Honshu arc

Ultrasonic laboratory measurements of P-wave velocity (Vp) were carried out up to 1.0 GPa in a temperature range of 25–400 °C for crustal and mantle xenoliths of Ichino-megata, northeast Japan. The rocks used in the present study cover a nearly entire range of lithological variation of the Ichino-megata xenoliths and are considered as representative rock samples of the lower crust and upper mantle of the back arc side of the northeast (NE) Honshu arc. The Vp values measured at 25 °C and 1.0 GPa are 6.7–7.2 km/s for the hornblende gabbros (38.6–46.9 wt.% SiO₂), 7.2 km/s for the hornblende-pyroxene gabbro (43.8 wt.% SiO₂), 6.9–7.3 km/s for the amphibolites (36.1–44.3 wt.% SiO₂), 8.0–8.1 km/s for the spinel lherzolites (46.2–47.2 wt.% SiO₂) and 6.30 km/s for the biotite granite (72.1 wt.% SiO₂). Combining the present data with the Vp profile of the NE Honshu arc [Iwasaki, T., Kato, W., Moriya, T., Hasemi, A., Umino, N., Okada, T., Miyashita, K., Mizogami, T., Takeda, T., Sekine, S., Matsushima, T., Tashiro, K., Miyamachi, H. 2001. Extensional structure in northern Honshu Arc as inferred from seismic refraction/wide-angle reflection profiling. Geophys. Res. Lett. 28 (12), 2329–2332], we infer that the 15 km thick lower crust of the NE Honshu arc is composed of amphibolite and/or hornblende (±pyroxene) gabbro with ultrabasic composition. The present study suggests that the Vp range of the lower crustal layer (6.6–7.0 km/s) in the NE Honshu arc, which is significantly lower than that obtained from various seismic measurements (e.g. the northern Izu-Bonin-Mariana arc: 7.1–7.3 km/s), is due to the thick hydrous lower crustal layer where hornblende, plagioclase and magnetite are dominant.     

Lagrangian observation of phytoplankton dynamics at an artificially enriched subsurface water in Sagami Bay,Japan

Phytoplankton dynamics in the lower euphotic zone were observed by tracking a subsurface water released at 20-m depth from Takumi, an artificial upwelling device. Takumi continually discharged seawater pumped up from a depth of 205 m: this water was mixed with 5-m depth water to adjust the density to that of 20-m depth water of Sagami Bay, Japan. The discharged water was pulse-labeled at Takumi with uranine and tracked for 63.9 h with a drifting buoy equipped with a drogue at 20-m depth. We present a simple model to estimate in situ phytoplankton net growth rates from temporal changes in phytoplankton abundance in the discharged water with correction for the influence of water exchange between the discharged water and neighboring layers. Lagrangian observation showed active growth of pico- and nanophytoplankton, especially cryptophytes and Synechococcus (Cyanobacteria), in the subsurface layer. In contrast, diatoms grew little in spite of micromolar concentrations of nutrients. The active growth of pico- and nanophytoplankton was in good agreement with shipboard serial dilution culture experiments. The low growth activity of diatoms was suggested to be related to low light availability in the subsurface layer.     

网式大地电磁阻抗张量及其影响因素分析

网式大地电磁（Network-MT,N-MT）法采用长数公里至数十公里的电话线为电极线测量电场,很难形成两条笔直且相互垂直的电极线,因此阻抗张量的计算不如大地电磁法中直接.本文依据阻抗张量的旋转规则提出了一种计算N-MT阻抗张量的简便算法.依据该算法计算了中国东北地区5个N-MT测站的阻抗张量,获得了基于阻抗张量的视电阻率、相位曲线和最佳主轴方位角分布图像,为我国东北N-MT资料的进一步处理和解释提供了基础性数据.此外,本文对比分析了朝阳测站中6条N-MT观测电极线上阻抗张量旋转值与观测值之间的差异,重点讨论了产生这种系统性偏差的各种因素,提出其主要因素可能来自“电场等效各向异性”效应,即测站附近的地壳内部存在与观测电极线尺度相比拟的横向非均匀构造,而测站各电极线沿不同方向跨越不均匀构造,此时各电极线上的电场分量不遵循同一电场矢量的分解准则,导致地表观测三角形内阻抗分量不满足统一的阻抗张量旋转规则.     

Evolution of crustal deformation in the northeast–central Japanese island arc: Insights from fault activity

We evaluated fault activity in northeast–central Japan based on fault orientation, regional stress field, and slip tendency analysis for active and non‐active faults (i.e. faults for which Quaternary activity has not been identified). Slip tendency is generally higher along active faults than non‐active faults, although a high slip tendency was observed along some non‐active faults, indicating their potential to become active. The potential for fault activity along non‐active faults can be modeled using the temporal evolution from non‐active to active during long‐term crustal deformation. The density of potentially active faults varies spatially across the study areas and reflects the temporal evolution of crustal deformation in northeast–central Japan.     

Hf–Nd isotope constraints on the origin of Dehshir Ophiolite,Central Iran

The peri‐Arabian ophiolite belt, from Cyprus in the west, eastward through Northwest Syria, Southeast Turkey, Northeast Iraq, Southwest Iran, and into Oman, marks a 3000 km‐long convergent margin that formed during a Late Cretaceous (ca 100 Ma) episode of subduction initiation on the north side of Neotethys. The Zagros ophiolites of Iran are part of this belt and are divided into Outer (OB) and Inner (IB) Ophiolitic Belts. We here report the first Nd–Hf isotopic study of this ophiolite belt, focusing on the Dehshir ophiolite (a part of IB). Our results confirm the Indian mid‐oceanic ridge basalt (MORB) mantle domain origin for the Dehshir mafic and felsic igneous rocks. All lavas have similar Hf isotopic compositions, but felsic dikes have significantly less‐radiogenic Nd isotopic compositions compared to mafic lavas. Elevated Th/Nb and Th/Yb in felsic samples accompany nonradiogenic Nd, suggesting the involvement of sediments or continental crust.     

Formation of TiC core‐graphitic mantle grains from CO gas

Abstract— We demonstrate a new formation route for TiC core‐graphitic mantle spherules that does not require carbon‐atom addition and the very long time scales associated with such growth (Bernatowicz et al. 1996). Carbonaceous materials can be formed from C₂H₂ and its derivatives, as well as from CO gas. In this paper, we will demonstrate that large‐cage‐structure carbon particles can be produced from CO gas by the Boudouard reaction. Since the sublimation temperature for such fullerenes is low, the large cages can be deposited onto previously nucleated TiC and produce TiC core‐graphitic mantle spherules. New constraints for the formation conditions and the time scale for the formation of TiC core‐graphitic mantle spherules are suggested by the results of this study. In particular, TiC core‐graphitic mantle grains that are found in primitive meteorites that have never experienced hydration could be mantled by fullerenes or carbon nanotubes rather than by graphite. In situ observations of these grains in primitive anhydrous meteoritic matrix could confirm or refute this prediction and would demonstrate that the graphitic mantle on such grains is a metamorphic feature due to interaction of the presolar fullerenes with water within the meteorite matrix.     

Mineral chemistry of MUSES‐C Regio inferred from analysis of dust particles collected from the first‐ and second‐touchdown sites on asteroid Itokawa

The mineralogy and mineral chemistry of Itokawa dust particles captured during the first and second touchdowns on the MUSES‐C Regio were characterized by synchrotron‐radiation X‐ray diffraction and field‐emission electron microprobe analysis. Olivine and low‐ and high‐Ca pyroxene, plagioclase, and merrillite compositions of the first‐touchdown particles are similar to those of the second‐touchdown particles. The two touchdown sites are separated by approximately 100 meters and therefore the similarity suggests that MUSES‐C Regio is covered with dust particles of uniform mineral chemistry of LL chondrites. Quantitative compositional properties of 48 dust particles, including both first‐ and second‐touchdown samples, indicate that dust particles of MUSES‐C Regio have experienced prolonged thermal metamorphism, but they are not fully equilibrated in terms of chemical composition. This suggests that MUSES‐C particles were heated in a single asteroid at different temperatures. During slow cooling from a peak temperature of approximately 800 °C, chemical compositions of plagioclase and K‐feldspar seem to have been modified: Ab and Or contents changed during cooling, but An did not. This compositional modification is reproduced by a numerical simulation that modeled the cooling process of a 50 km sized Itokawa parent asteroid. After cooling, some particles have been heavily impacted and heated, which resulted in heterogeneous distributions of Na and K within plagioclase crystals. Impact‐induced chemical modification of plagioclase was verified by a comparison to a shock vein in the Kilabo LL6 ordinary chondrite where Na‐K distributions of plagioclase have been disturbed.     

Structure of magnetic fields generated by galactic dynamos

Abstract

We investigated global axisymmetric (m = 0) and non-axisymmetric (m = 1) modes of magnetic fields generated by the galactic dynamo including the α²-dynamo. The α²-dynamo is responsible for the field generation in the central region of galaxies where the shear of galactic rotation is weak (e.g. M51). The highest growth rate of m = 1 modes is always smaller than that of m = 0 modes; thus m = 1 modes of the standard galactic dynamo cannot explain the dominance of the bisymmetric fields in spiral galaxies. Radial extent of each m = 1 mode is too narrow to reproduce the observed bisymmetric structure extending over a disk.     

Distinctive C isotopic signature distinguishes a novel sea ice biomarker in Arctic sediments and sediment traps

A C₂₅ highly branched isoprenoid (HBI) monoene hydrocarbon, designated IP₂₅, has been proposed previously to originate from diatoms living in Arctic sea ice, while the presence of IP₂₅ in sediments has been suggested to be a proxy for the occurrence of former Arctic sea ice. Here, we show that the ¹³C isotopic composition of IP₂₅ in sea ice, in sediment trap material collected under sea ice, and in high latitude northern sediments, is distinctive (isotopically ‘heavy’) and distinguishable from that of organic matter of planktonic or terrigenous origin. Mean δ¹³C values for IP₂₅ were − 22.3 ± 0.4‰ (sea ice), − 19.6 ± 1.1‰ (sediment traps) and − 19.3 ± 2.3‰ (sediments). These measurements, therefore, support further the proposed use of IP₂₅ as an Arctic sea ice proxy.