GPS network monitors the Western Alps' deformation over a five-year period: 1993–1998

  The Western Alps are among the best studied collisional belts with both detailed structural mapping and also crustal geophysical investigations such as the ECORS and EGT seismic profile. By contrast, the present-day kinematics of the belt is still largely unknown due to small relative motions and the insufficient accuracy of the triangulation data. As a consequence, several tectonic problems still remain to be solved, such as the amount of N–S convergence in the Occidental Alps, the repartition of the deformation between the Alpine tectonic units, and the relation between deformation and rotation across the Alpine arc. In order to address these problems, the GPS ALPES group, made up of French, Swiss and Italian research organizations, has achieved the first large-scale GPS surveys of the Western Alps. More than 60 sites were surveyed in 1993 and 1998 with a minimum observation of 3 days at each site. GPS data processing has been done by three independent teams using different software. The different solutions have horizontal repeatabilities (N–E) of 4–7 mm in 1993 and 2–3 mm in 1998 and compare at the 3–5-mm level in position and 2-mm/yr level in velocity. A comparison of 1993 and 1998 coordinates shows that residual velocities of the GPS marks are generally smaller than 2 mm/yr, precluding a detailed tectonic interpretation of the differential motions. However, these data seem to suggest that the N–S compression of the Western Alps is quite mild (less than 2 mm/yr) compared to the global convergence between the African and Eurasian plate (6 mm/yr). This implies that the shortening must be accomodated elsewhere by the deformation of the Maghrebids and/or by rotations of Mediterranean microplates. Also, E–W velocity components analysis supports the idea that E–W extension exists, as already suggested by recent structural and seismotectonic data interpretation. Received: 27 November 2000 / Accepted: 17 September 2001     

Magnetic anomaly pattern in the western mediterranean

A survey of the southern part of the Balearic Basin was flown in 1971 at a height of 600 m. The results of a survey of the northern part, flown at a height of 3000 m, which was previously published, have been downward continued to a height of 600 m. The resulting composite map shows well defined low amplitude (100 gammas) magnetic lineations of the Vine et Matthews' type offset by fracture zones. The lineated zones are bounded by large quasi-circular anomalies on the edge of possibly “continental” non magnetic zones. The results define a complex kinematic pattern of the opening of the Balearic Basin, in terms of plate tectonics.     

Conventional and combined pump-and-treat systems under nonuniform background flow

We investigate the performance of vertical hydraulic barriers in combination with extraction wells for the partial hydraulic isolation of contaminated aquifer areas. The potential advantage of such combinations compared to a conventional pump-and-treat system has already been demonstrated in a previous study. Here we extend the scope of the performance analysis to the impact of uncertainty in the regional flow direction as well as to highly heterogeneous aquifer transmissivity distributions. In addition, two new well-barrier scenarios are proposed and analyzed. The hydraulic efficiency of the scenarios is rated based on the expected (mean) reduction of the pumping rate that is required to achieve downgradient contaminant capture. The uncertain spatial distribution of aquifer transmissivity is considered by means of unconditioned Monte Carlo simulations. The significance of uncertain background flow conditions is incorporated by computing minimized pumping rates for deviations of the regional flow direction up to 30 degrees from a normative base case. The results give an answer on how pumping rates have to be changed for each barrier-well combination in order to achieve robust systems. It is exposed that in comparison to installing exclusively wells, the barrier-supported approach generally yields savings in the (average) pumping rate. The particular efficiency is shown to be highly dependent on the interaction of variance and integral scale of transmissivity distribution, well and barrier position, as well as direction of background flow.     

Combining pump-and-treat and physical barriers for contaminant plume control

A detailed analysis is presented of the hydraulic efficiency of plume management alternatives that combine a conventional pump-and-treat system with vertical, physical hydraulic barriers such as slurry walls or sheet piles. Various design settings are examined for their potential to reduce the pumping rate needed to obtain a complete capture of a given contaminated area. Using established modeling techniques for flow and transport, those barrier configurations (specified by location, shape, and length) that yield a maximum reduction of the pumping rate are identified assuming homogeneous aquifer conditions. Selected configurations are further analyzed concerning their hydraulic performance under heterogeneous aquifer conditions by means of a stochastic approach (Monte Carlo simulations) with aquifer transmissivity as a random space function. The results show that physical barriers are an appropriate means to decrease expected (mean) pumping rates, as well as the variance of the corresponding pumping rate distribution at any given degree of heterogeneity. The methodology presented can be transferred easily to other aquifer scenarios, provided some basic premises are fulfilled, and may serve as a basis for reducing the pumping rate in existing pump-and-treat systems.     

Evaluating MT3DMS for Heat Transport Simulation of Closed Geothermal Systems

Owing to the mathematical similarities between heat and mass transport, the multi-species transport model MT3DMS should be able to simulate heat transport if the effects of buoyancy and changes in viscosity are small. Although in several studies solute models have been successfully applied to simulate heat transport, these studies failed to provide any rigorous test of this approach. In the current study, we carefully evaluate simulations of a single borehole ground source heat pump (GSHP) system in three scenarios: a pure conduction situation, an intermediate case, and a convection-dominated case. Two evaluation approaches are employed: first, MT3DMS heat transport results are compared with analytical solutions. Second, simulations by MT3DMS, which is finite difference, are compared with those by the finite element code FEFLOW and the finite difference code SEAWAT. Both FEFLOW and SEAWAT are designed to simulate heat flow. For each comparison, the computed results are examined based on residual errors. MT3DMS and the analytical solutions compare satisfactorily. MT3DMS and SEAWAT results show very good agreement for all cases. MT3DMS and FEFLOW two-dimensional (2D) and three-dimensional (3D) results show good to very good agreement, except that in 3D there is somewhat deteriorated agreement close to the heat source where the difference in numerical methods is thought to influence the solution. The results suggest that MT3DMS can be successfully applied to simulate GSHP systems, and likely other systems with similar temperature ranges and gradients in saturated porous media.     

Zur Interpretation von Pyrrhotin-Gefügen

Zusammenfassung Die Gefüge von Pyrrhotinerzen von vier Lagerstätten wurden mit einem Röntgentexturgoniometer untersucht. Alle Proben zeigen eine Einregelung von (0001) ± parallel zur Ebene der Lagigkeit (s) der Erze. Die Gefügediagramme der (10 2)-, (11 0)- und (10 0)-Reflexe von drei Fundpunkten haben orthorhombische Symmetrie. Die gleichen Diagramme der vierten Lagerstätte sind hexagonal.Die orthorhombischen Gefüge werden durch eine Deformation mit einfacher Scherung erklärt. Mit Hilfe eines Rechenprogrammes wurden entsprechende synthetische Gefügediagramme erzeugt. Ihre Ähnlichkeit mit der Mehrzahl der natürlichen Texturen macht das angenommene Modell wahrscheinlich. Auch kann geschlossen werden, daß die Proben — ausgenommen diejenigen mit nicht hinreichend deutbarer hexagonaler Symmetrie — durch eine Scherverformung entstanden sind.Gelegentlich scheint es möglich, durch Gefügeuntersuchungen an Erzen Rückschlüsse auf die tektonische Geschichte der Lagerstätte bzw. auf deren Beanspruchung zu ziehen.

---

The fabrics of pyrrhotite ores from four deposits are determined by means of an X-ray texture goniometer. All specimens show (0001) ± parallel to the plane of schistosity (s) of the ores. The pole figures of the (10 2)-, (11 0)-, and (10 0)-reflections from samples of three localities are of orthorhombic symmetry. The same pole figures from the fourth deposit show hexagonal symmetry.The fabrics of pyrrhotite with orthorhombic symmetry are explained assuming a model with a deformation by simple shear. Synthetic diagrams are plotted using a program which simulates the conditions of this model. The synthetic diagrams are in good agreement with most of the measured ones, and this argues for the validity of the suggested model on the one hand and on the other hand confirms that these pyrrhotite fabrics may have been formed by simple shear. The fabrics with hexagonal symmetry seem to be produced by a quite different mechanism.In some cases one may infer from the results of the fabric analysis of ores to the tectonical history and the mode of deformation of the ore deposit.

     

Seismic anisotropy beneath Dronning Maud Land, Antarctica, revealed by shear wave splitting

Shear wave splitting analyses have been carried out using teleseismic data from broad-band seismograph stations deployed at temporary and permanent locations in Dronning Maud Land (DML), Antarctica. In most cases, the observed anisotropy can be related to major tectonic events that formed the present-day Antarctic continent. We rule out an anisotropic contribution from recent asthenospheric flow. At the Russian base Novolazarevskaya near the coast in central DML, waveform inversion suggests a two-layer model where the fast direction of the upper layer is oriented parallel to Archean fabrics in the lithosphere, whereas the anisotropy of the lower layer is interpreted to have been created during the Jurassic Gondwana break-up. Recordings at the South African base Sanae IV, however, show enigmatic results. For narrow backazimuthal segments, splitting parameters show strong variations together with a multitude of isotropic measurements, indicative of complex scattering that cannot be explained by simple one- or two-layer anisotropic models. In the interior of the continent, the data are consistent with single-layer anisotropy, but show significant spatial variations in splitting parameters. A set of temporary stations across the Heimefront shear zone in western DML yield splitting directions that we interpret as frozen anisotropy from Proterozoic assembly of the craton. An abrupt change in fast axis direction appears to mark a suture between the Grunehogna craton, a fragment of the Kalahari–Kaapvaal craton in southern Africa and the Mesoproterozoic Maudheim Province.     

Assessing strategic water availability using remote sensing,GIS and a spatial water budget model: case study of the Upper Ing Basin,Thailand

Abstract

This paper assesses strategic water availability and use under different development pathways on a basin scale using remote sensing (RS), geographical information systems (GIS) and a spatial water budget model (SWBM). The SWBM was applied to the Upper Ing Basin in northern Thailand to investigate the spatial and temporal variations in the location of streams and water yields from different parts of the basin. The base simulation was carried out for the years 1998–2007 using a DEM and actual land-use data at 100-m resolution. The simulated stream network was compared with topographic maps under different flow conditions, which were successfully represented. The 10-year average simulated river flow rate was 1300 L/s, but it more than doubled during periods of heavy rainfall and decreased below 600 L/s in dry seasons. The total length of the streams (based on flow threshold of 25 L/s) on a typical day in the dry season differed by a factor of approx. 1.5. Agricultural water needs and possible extraction were assessed and presented by dividing the basin into 10 different zones based on the stream network. The results show that there is the potential for harvesting significant quantities of water at different spatial gradients with no initial water supply for irrigation. Monthly water yields for each zone were computed; the results varied from less than 50% to over 137% of the per hectare water yield for the entire basin. This variation was due to differences in topography and land cover. The impact of land use and climate change on streamwater availability was also studied. The basin shows very different hydrological responses. The changes in average river flow relative to the base simulation were +27.6%,??32.1%, +94% and +52.9% under deforestation, changing land use from paddy field to orchard, bare soil and increased rainfall scenarios, respectively.

Citation Bahadur KC, K. (2011) Assessing strategic water availability using remote sensing, GIS and a spatial water budget model: case study of the Upper Ing Basin, Thailand. Hydrol. Sci. J. 56(6), 994–1014.     

Estimating time parameters of overland flow on impervious surfaces by the particle tracking method

Abstract

Travel time and time of concentration T_c are important time parameters in hydrological designs. Although T_c is the time for the runoff to travel to the outlet from the most remote part of the catchment, most researchers have used an indirect method such as hydrograph analysis to estimate T_c. A quasi two-dimensional diffusion wave model with particle tracking for overland flow was developed to determine the travel time, and validated for runoff discharges, velocities, and depths. Travel times for 85%, 95% and 100% of particles arrival at the outlet of impervious surfaces (i.e. T_t85, T_t95, and T_t100) were determined for 530 model runs. The correlations between these travel times and T_c estimated from hydrograph analysis showed a significant agreement between T_c and T_t85. All the travel times showed nonlinear relationships with the input variables (plot length, slope, roughness coefficient, and effective rainfall intensity) but showed linear relationships with each other.

Editor D. Koutsoyiannis; Associate editor S. Grimaldi