中国-巴基斯坦喀喇昆仑公路Ghulkin冰川百年进退变化

巴基斯坦喀喇昆仑山的Ghulkin冰川是距离中国-巴基斯坦喀喇昆仑公路最近的典型冰川之一,其冰川的进退变化影响着喀喇昆仑公路改建工程的线路设计与工程施工.为了追溯Ghulkin冰川的活动历史和查明近期进退变化,对过去200 a的相关文献和记录进行统计分析,并开展了2008-2011年野外定点观测,总结与分析了Ghulkin冰川冰舌的活动历史与近期变化.研究表明：Ghulkin冰川在1885-1980年近百年间经历了3次前进和3次后退,在此期间冰川波动了625 m;1913-1925年冰川处于显著的前进状态,1966-1978年冰川有小段距离的前进;2008-2011年K676+660处泥石流沟道逐年抬升,2011年南坡冰川融水由K676+660改道至K676+450;2010年的南坡冰舌较1994年后退了300余米,2011年的南坡冰舌较2010年后退了15.066 m,可见在2010-2011年期间冰川处于局部短期后退状态. 中巴公路冰川泥石流等灾害不但受区域气候的影响,而且还受冰川变化的影响.未来气候变暖将会导致冰川的强烈消融和后退,冰川融水携带大量冰碛体,形成大型的冰川泥石流,对公路的安全运营造成严重威胁.     

On the performance of a new bivariate pseudo Pareto distribution with application to drought data

A new bivariate pseudo Pareto distribution is proposed, and its distributional characteristics are investigated. The parameters of this distribution are estimated by the moment-, the maximum likelihood- and the Bayesian method. Point estimators of the parameters are presented for different sample sizes. Asymptotic confidence intervals are constructed and the parameter modeling the dependency between two variables is checked. The performance of the different estimation methods is investigated by using the bootstrap method. A Markov Chain Monte Carlo simulation is conducted to estimate the Bayesian posterior distribution for different sample sizes. For illustrative purposes, a real set of drought data is investigated.     

Flood hazard assessment and mapping of River Swat using HEC-RAS 2D model and high-resolution 12-m TanDEM-X DEM (WorldDEM)

Natural Hazards - Floods are among the most devastating and recurring natural hazards and have caused extensive economic losses to human lives and infrastructures around the world. Swat valley in...     

Geological and Geochemical Characteristics of Gold Mineralization in the Salu Bulo Prospect,Sulawesi, Indonesia

The Salu Bulo prospect is one of the gold prospects in the Awak Mas project in the central part of the western province, Sulawesi, Indonesia. The gold mineralization is hosted by the meta‐sedimentary rocks intercalated with the meta‐volcanic and volcaniclastic rocks of the Latimojong Metamorphic Complex. The ores are approximately three meters thick, consisting of veins, stockwork, and breccias. The veins can be classified into three stages, namely, early, main, and late stages, and gold mineralization is related to the main stage. The mineral assemblage of the matrix of breccia and the veins are both composed of quartz, carbonate (mainly ankerite), and albite. High‐grade gold ores in the Salu Bulo prospect are accompanied by intense alteration, such as carbonatization, albitization, silicification, and sulfidation along the main stage veins and breccia. Alteration mineral assemblage includes ankerite ± calcite, quartz, albite, and pyrite along with minor sericite. Pyrite is the most abundant sulfide mineral that is spatially related to native gold and electrum (<2–42 μm in size). It is more abundant as dissemination in the altered host rocks than those in veins. This suggests that water–rock interaction played a role to precipitate pyrite and Au in the Salu Bulo prospect. The Au contents of intensely altered host rocks and ores have positive correlations with Ag, Ni, Mo, and Na. Fluid inclusions in the veins of the main stage and the matrix of breccia are mainly two‐phase liquid‐rich inclusions with minor two‐phase, vapor‐rich, and single‐phase liquid or vapor inclusions. CO₂ and N₂ gases are detected in the fluid inclusions by Laser Raman microspectrometry. Fluid boiling probably occurred when the fluid was trapped at approximately 120–190 m below the paleo water table. δ¹⁸O_SMOW values of fluid, +5.8 and +7.6‰, calculated from δ¹⁸O_SMOW of quartz from the main stage vein indicate oxygen isotopic exchange with wall rocks during deep circulation. δ³⁴S_CDT of pyrite narrowly ranges from ?2.0 to +3.4‰, suggesting a single source of sulfur. Gold mineralization in the Salu Bulo prospect occurred in an epithermal condition, after the metamorphism of the host rocks. It formed at a relatively shallow depth from fluids with low to moderate salinity (3.0–8.5 wt% NaCl equiv.). The temperature and pressure of ore formation range from 190 to 210°C and 1.2 to 1.9 MPa, respectively.     

An estimation of the height system bias parameter <Emphasis Type="Italic">N</Emphasis><Subscript>0</Subscript> using least squares collocation from observed gravity and GPS-levelling data

This paper deals with the analysis of gravity anomaly and precise levelling in conjunction with GPS-Levelling data for the computation of a gravimetric geoid and an estimate of the height system bias parameter N_o for the vertical datum in Pakistan by means of least squares collocation technique. The long term objective is to obtain a regional geoid (or quasi-geoid) modeling using a combination of local data with a high degree and order Earth gravity model (EGM) and to determine a bias (if there is one) with respect to a global mean sea surface. An application of collocation with the optimal covariance parameters has facilitated to achieve gravimetric height anomalies in a global geocentric datum. Residual terrain modeling (RTM) technique has been used in combination with the EGM96 for the reduction and smoothing of the gravity data. A value for the bias parameter N_o has been estimated with reference to the local GPS-Levelling datum that appears to be 0.705 m with 0.07 m mean square error. The gravimetric height anomalies were compared with height anomalies obtained from GPS-Levelling stations using least square collocation with and without bias adjustment. The bias adjustment minimizes the difference between the gravimetric height anomalies with respect to residual GPS-Levelling data and the standard deviation of the differences drops from 35 cm to 2.6 cm. The results of this study suggest that N_o adjustment may be a good alternative for the fitting of the final gravimetric geoid as is generally done when using FFT methods.     

Microfacies and Depositional Environments of Miocene Isolated Carbonate Platforms from Central Luconia, Offshore Sarawak, Malaysia

The Luconia Province – offshore Sarawak – is a key geological unit for understanding the distribution of hydrocarbon resources in Malaysia. Nevertheless, little effort has been made to address the palaeoenvironmental characteristics of the Tertiary carbonates in the key sector of Central Luconia. We study the sedimentology and petrography of core samples from a well in Central Luconia, for which thirteen microfacies have been identified reflecting different depositional settings. This is the first microfacies scheme elaborated for Luconian carbonates. Lithofacies and microfacies distribution are compatible with deposition in a reef complex, originating around a framework reef, within the euphotic zone. Sediments were deposited in environments of backreef, reef crest, and forereef. The fair weather wave base is marked by the presence of coralline red algae, foraminifera, decreasing degree of bioclast fragmentation and other microfacies features. As a result, a depositional-environmental model is constructed, depicting a reef complex built around a framework reef developed on the margin of an isolated platform. In addition, an innovative, preliminary time series analysis of facies, microfacies and depositional environment data reveal the existence of seasonal cycles in the stacking patterns of facies and microfacies.     

Petrography,provenance, diaganesis and depositional environment of Murree Formation in Jhelum Valley,Sub Himalayas,Azad Jammu and Kashmir,Pakistan

The clastic sediments of the Murree Formation of Miocene age are exposed in Jhelum valley areas of Azad Jammu and Kashmir Pakistan. Field observations revealed the cyclic deposition in the Murree Formation. The sandstone, siltstone, and shale constitute a single cycle within the formation. This single unit is divided into five different lithofacies which constitute the Bouma sequence in the Murree Formation. The Murree Formation shows faulted contacts with Panjal Formation and Nagri Formation in the study area. The modal mineralogy data obtained from the petrography of sandstone indicates that sandstone is litharenite and lithic greywacke. The mineralogical and textural data suggests that sandstone is compositionally mature and poorly to moderately sorted. The dominantly angular to sub angular quartz grains show nearness of the source area. Fractured and sutured quartz grain reveals tectonodiagentic changes that occurred in Murree Formation. The sandstone experienced diagenetic changes. The pressure solution and cementation reduced the primary porosity of sandstone. However, alteration of feldspar and fractures in grains have produced secondary porosity. The X-ray diffraction (XRD) of the shale samples indicates that shale of the Murree Formation is argillaceous and dominated by illite clay mineral. The illite crystallinity values indicate very low grade metamorphism of Murree Formation in core of Hazara Kashmir Syntaxis. The petrographic data suggests that the provenance of sandstone is recycled orogen. Quartz is of igneous and metamorphic origin. Feldspar (albite and microcline) composition suggests its derivation from acidic igneous rocks. The rock fragments of volcanics, slate, phyllite, and schist suggest igneous and metamorphic provenance. The petrographic data suggests that at the time of deposition of Murree Formation, igneous and low grade metamorphic rocks were exposed. However, presence of some clasts of carbonates indicates that sedimentary rocks were also exposed in the source region. The quartz content and clay minerals in the shale revealed that source region was igneous and metamorphic rocks. Cyclic deposition, lithofacies, and various sedimentary structures like cross bedding, ripple marks, and calcite concretions suggest that deposition of Murree Formation occurred in fluviatile environment by meandering river system having decreasing turbidity current.     

Robust approach for optimal positioning and ranking potential rainwater harvesting structure (RWH): a case study of Iraq

Rainwater harvesting (RWH) structure is considered as the best solution to conserve water for arid regions. The selection of RWH location is based on several key determinants such as hydrology, environment, topography, and socio-economic. This study proposed a robust methodology to identify and select the location of RWH using geographical information systems (GIS) and remote sensing (RS) with multi-criteria decision techniques in areas where data are scarce. Several thematic maps were extracted such as vegetation cover, soil group, slope, land use, and digital elevation (DEM). The RWH sites were ranked based on four major indexes: evaporation, cost-benefit, sediment, and hydrological index. Sensitivity analysis shows that the variance inverse (VI) and rank order method (ROM) considered all indices that effect ranking as compared to the analytic hierarchy process (AHP) and fuzzy-AHP. Sensitivity analysis also proved that the proposed method is suitable to be used for RWH site selection in arid regions.