Simulating the effect of hydrate dissociation on wellhead stability during oil and gas development in deepwater

It is well known that methane hydrate has been identified as an alternative resource due to its massive reserves and clean property. However, hydrate dissociation during oil and gas development (OGD) process in deep water can affect the stability of subsea equipment and formation. Currently, there is a serious lack of studies over quantitative assessment on the effects of hydrate dissociation on wellhead stability. In order to solve this problem, ABAQUS finite element software was used to develop a model and to evaluate the behavior of wellhead caused by hydrate dissociation. The factors that affect the wellhead stability include dissociation range, depth of hydrate formation and mechanical properties of dissociated hydrate region. Based on these, series of simulations were carried out to determine the wellhead displacement. The results revealed that, continuous dissociation of hydrate in homogeneous and isotropic formations can causes the non-linear increment in vertical displacement of wellhead. The displacement of wellhead showed good agreement with the settlement of overlying formations under the same conditions. In addition, the shallower and thicker hydrate formation can aggravate the influence of hydrate dissociation on the wellhead stability. Further, it was observed that with the declining elastic modulus and Poisson’s ratio, the wellhead displacement increases. Hence, these findings not only confirm the effect of hydrate dissociation on the wellhead stability, but also lend support to the actions, such as cooling the drilling fluid, which can reduce the hydrate dissociation range and further make deepwater operations safer and more efficient.     

Magmatic Evolution of the La Pacana Caldera System, Central Andes, Chile: Compositional Variation of Two Cogenetic, Large-Volume Felsic Ignimbrites

La Pacana is one of the largest known calderas on Earth, andis the source of at least two major ignimbrite eruptions witha combined volume of some 2700 km³. These ignimbrites have stronglycontrasting compositions, raising the question of whether theyare genetically related. The Toconao ignimbrite is crystal poor,and contains rhyolitic (76–77 wt % SiO₂) tube pumices.The overlying Atana ignimbrite is a homogeneous tuff whose pumiceis dacitic (66–70 wt % SiO₂), dense (40–60% vesicularity)and crystal rich (30–40 % crystals). Phase equilibriaindicate that the Atana magma equilibrated at temperatures of770–790°C with melt water contents of 3·1–4·4wt %. The pre-eruptive Toconao magma was cooler (730–750°C)and its melt more water rich (6·3–6·8 wt% H₂O). A pressure of 200 MPa is inferred from mineral barometryfor the Atana magma chamber. Isotope compositions are variablebut overlapping for both units (⁸⁷Sr/⁸⁶Sr_i 0·7094–0·7131;¹⁴³Nd/¹⁴⁴Nd 0·51222–0·51230) and are consistentwith a dominantly crustal origin. Glass analyses from Atanapumices are similar in composition to those in Toconao tubepumices, demonstrating that the Toconao magma could representa differentiated melt of the Atana magma. Fractional crystallizationmodelling suggests that the Toconao magma can be produced by30% crystallization of the observed Atana mineral phases. Toconaomelt characteristics and intensive parameters are consistentwith a volatile oversaturation-driven eruption. However, thelow H₂O content, high viscosity and high crystal content ofthe Atana magma imply an external eruption trigger. KEY WORDS: Central Andes; crystal-rich dacite; eruption trigger; high-silica rhyolite; zoned magma chamber     

Set-asides for carbon sequestration: implications for permanence and leakage

This paper examines the potential role of forest set-asides in global carbon sequestration policy. While set asides that protect forests from timber harvests and land-use conversion may alleviate concerns with permanence, and they may provide large ancillary environmental benefits, they may also lead to large leakage. This paper uses a global land use and forestry model to examine the efficiency of three crediting schemes for set-asides. The results show that if set-asides are integrated into a global forestry carbon sequestration program that includes a wide range of other management options, then 300 million hectares of land would be set-aside, and up to 128 Pg C could be sequestered in global forests by 2105. Under alternative policies that focus exclusively on set-asides, more forestland can be set-asides, up to 3.2 billion hectare, but these policies invite large leakage in the near-term, and in the long-run, they less net carbon is removed from the atmosphere. Specifically, leakage is estimated to be 47–52%, depending on the policy, and by the end of the century, up to 17% less carbon will be sequestered in all forests.     

Ultramafic–Mafic Assemblage of Plutonic Rocks and Hornblende Schists of Shirshov Rise,Bering Sea,and Stalemate Ridge,Northwest Pacific: Geodynamic Interpretations of Geochemical Data

The paper presents data on plutonic and metamorphic rocks dredged during Cruise 249 of the German R/V Sonne to the Stalemate Ridge, Northwest Pacific Ocean and the Shirshov Rise, western Bering Sea. Dredges in the northwestern sector of the Stalemate Ridge and central portion of the Shirshov Rise show that the plutonic and metamorphic rocks obtained here are amazingly similar. Our petrologic and geochemical data led us to view the rocks as members of a mafic–ultramafic assemblage typical of cumulate portions of ophiolite complexes and backarc spreading centers. The plutonic complexes of the Shirshov Rise and Stalemate Ridge show similarities not only in the petrography and mineralogy of their protoliths but also in the character of their metamorphic transformations. Plutonic rocks from both areas display mineralogical evidence of metamorphism within a broad temperature range: from the high-temperature amphibolite facies to the greenschist facies. Relations between the index mineral assemblages indicate that the metamorphic history of plutonic complexes in the Stalemate Ridge and Shirshov Rise proceeded along a retrograde path. Hornblende schists accompanying the plutonic rocks of the Stalemate Ridge and Shirshov Rise are petrographically close to foliated amphibolites in subophiolitic metamorphic aureoles. Within the framework of geodynamic interpretations of our results, it is realistic to suggest that the examined plutonic complexes were exhumed from subduction zones of various age.     

Development of New Zealand according to the fore-arc model of crustal evolution

Analysis of New Zealand geology using a fore-arc model (Crook, 1980a) leads to the recognition of four arc terrains. The west facing Tuhua volcanic arc was active from the Late Proterozoic until the Middle or Late Cambrian. Post-subduction sediments, neritic in the east and flysch in the west, accumulated on the Tuhua accretionary prism from the Late Cambrian until the Early Devonian. Thermal equilibration, metamorphism, granitoid plutonism and penetrative deformation occurred in the Middle to Late Devonian. A small area of Permian platform cover has escaped later erosion. The east-facing Rangitata Terrain records subduction from Early Permian to late Early Cretaceous. Much of its accretionary prism consists of a submarine fan complex derived from Western Antarctica and carried sideways into the trench. The accretionary prism is thick and completely kratonized in southern New Zealand, but the thickness is more variable northwards. There the overlying Upper Cretaceous to Upper Oligocene post-subduction sequence comprises shelf sediments (implying an intermediate-thickness prism) or flysch followed by shelf sediments (implying a thin prism). During the accumulation of this sequence the Rangitata Terrain was a passive continental margin. The south-facing Jurassic-late Oligocene Northland Terrain collided with this passive margin in northern New Zealand at the end of the Oligocene, forming the Northland Allochthon. Subduction then flipped and the oldest part of the Kaikoura Terrain volcanic arc formed on the outer part of the Northland Terrain. Originally this terrain faced northeast and consumed the southwestern part of the South Fiji Basin crust, but during the Miocene the arc migrated clockwise to assume its present northeastern orientation. The fore-arc model employed here satisfactorily explains most first-order and many second-order features of New Zealand geology without requiring modification, thus attesting to the model's versatility and robustness. New Zealand provides a basis for elaborating some aspects of the model, particularly the transition from the syn- to post-subduction phases of fore-arc evolution. Combination of this study with a similar study of the southeastern Australian Paleozoic yields insights into the Phanerozoic evolution of the Australian: Pacific Plates' active margin.     

Nature and age of metamorphic rocks from the basement of the West Siberian megabasin (according to U-Pb isotopic dates)

The SHRIMP-II zircon U-Pb dates for metamorphic rocks from the West Siberian basement are determined for the first time. It is established that the major protolith of the metamorphic strata from the Shaimsk-Kuznetsovsk meganticlinorium is composed of sedimentary Late- and Middle-Devonian rocks (395–398 Ma). It is likely that the greywackes, whose strata were mainly formed under erosion of ophiolitic rocks, served as a substrate for the metamorphic rocks. The metamorphic transformations of the rocks occurred under conditions of greenschist and occasionally lower amphibolite facies of metamorphism during the Late Carboniferous-Early Permian period.     

Theoretical calculation of equilibrium Mg isotope fractionation between silicate melt and its vapor

Isotope fractionation during the evaporation of silicate melt and condensation of vapor has been widely used to explain various isotope signals observed in lunar soils, cosmic spherules, calcium–aluminum-rich inclusions, and bulk compositions of planetary materials. During evaporation and condensation, the equilibrium isotope fractionation factor (α) between high-temperature silicate melt and vapor is a fundamental parameter that can constrain the melt’s isotopic compositions. However, equilibrium α is difficult to calibrate experimentally. Here we used Mg as an example and calculated equilibrium Mg isotope fractionation in MgSiO₃ and Mg₂SiO₄ melt–vapor systems based on first-principles molecular dynamics and the high-temperature approximation of the Bigeleisen–Mayer equation. We found that, at 2500 K, δ²⁵Mg values in the MgSiO₃ and Mg₂SiO₄ melts were 0.141?±?0.004 and 0.143?±?0.003‰ more positive than in their respective vapors. The corresponding δ²⁶Mg values were 0.270?±?0.008 and 0.274?±?0.006‰ more positive than in vapors, respectively. The general \(\alpha - T\) equations describing the equilibrium Mg α in MgSiO₃ and Mg₂SiO₄ melt–vapor systems were: \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.264 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\) and \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.340 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\), respectively, where m is the mass of light isotope ²⁴Mg and m′ is the mass of the heavier isotope, ²⁵Mg or ²⁶Mg. These results offer a necessary parameter for mechanistic understanding of Mg isotope fractionation during evaporation and condensation that commonly occurs during the early stages of planetary formation and evolution.     

Towards urbanisation of the non-hydrostatic numerical weather prediction model Lokalmodell (LM)

Numerical weather prediction models are increasingly employed for providing meteorological data for urban air quality applications. Model resolution, physiographic parameters and surface-layer parameterisations need to be adapted to the requirements of the urban boundary layer. The Lokalmodell of the German Weather Service was triple-nested down to a horizontal grid resolution of 1.1 km, urbanised physiographic parameters were implemented, and an additional anthropogenic heat source was introduced. Results of a sensitivity study for a spring dust episode in Helsinki show a clear urbanisation effect of these measures on temperature, humidity and the partitioning of surface fluxes, leading to an increased Bowen ratio and heat storage and an urban heat island effect.     

Cyclic degradation and non-coaxiality of soft clay subjected to pure rotation of principal stress directions

Foundation soils are often under non-proportional cyclic loadings. The deformation behaviour and the mechanism of non-coaxiality under continuous pure principal stress rotation for clays are not clearly investigated up to now. In order to study the effect of pure principal stress rotation, a series of cyclic undrained tests on Shanghai soft clay subjected to cyclic rotation of principal stress directions keeping the deviatoric stress constant under the pure rotation condition were conducted using hollow cylinder apparatus. Based on this, the evolutions of excess pore pressure and strains during cyclic loading were investigated, together with the effects of the intermediate principal stress parameter and the deviatoric stress level on stress–strain stiffness and non-coaxiality. The result can provide an experimental basis for constitutive modelling of clays describing the behaviour under non-proportional loadings.     

Uranium (U) concentration and its genetic significance in the phosphorites of the Paleoproterozoic Bijawar Group of the Lalitpur district,Uttar Pradesh,India

The paper presents the uranium (U) concentration and distribution pattern in the Paleoproterozoic phosphorites of Lalitpur district of Uttar Pradesh. The study of thin sections, SEM and XRD reveal that apatite is the essential phosphate mineral while quartz and feldspars are the dominant gangue in the phosphorites of the investigated area. The collophane is observed to be mostly oolitic in form and microspherulitic in texture. The major element geochemistry indicated that the phosphorite samples are rich in P₂O₅, CaO, SiO₂ and Fe₂O₃ whereas depletion of MgO, MnO, K₂O and Al₂O₃ was observed. The CaO/P₂O₅ ratio ranges from 1.13 to 1.46 which is slightly lower than that of cations and anions substituted francolite (1.621) and close to that of carbonate-fluorapatite (1.318). The trace element geochemistry indicates that the phosphorites of Lalitpur have the significant range of U concentration (1.67 to 129.67 μg/g) which is more than that of Th (0.69 to 0.09 μg/g) among the analysed trace elements in the phosphorite samples of the area. The positive correlation of U with P₂O₅, CaO and U/P₂O₅ indicates a close association of U with phosphate minerals like collophane (apatite), whereas negative correlation of U with SiO₂ and Fe₂O₃ may be due to mutual replacement. The antipathetic relationship of U with Ni may be an indication of high oxidizing conditions, whereas sympathetic relationship of U with K₂O points towards higher alkaline conditions of the basin of deposition during phosphatization. The variable concentration of U and its relationship with significant major and trace elements in most of the phosphorite samples lead one to believe that the deposition of these phosphorites might have taken place in highly alkaline medium during fairly oxidizing to weakly reducing environmental conditions of geosynclinal basin.