Fluid-rock interaction in the Mo-bearing Nebelstein greisen complex,Bohemian Massif (Austria)

Summary In the Nebelstein area, molybdenite-bearing greisens occur together with peraluminous leucogranites. In the compositional change of the granites to the greisens, there is an almost complete loss of Na, combined with a decrease in Ca, Mg, Sr, and Ti concentrations. The progressive alteration is reflected by lower homogenization temperatures and increasing salinity in aqueous fluid inclusions. The fluid regime prior to greisenization was water-dominated with low salt contents, while the early stage of the greisen development was characterized by a mixed fluid containing carbon dioxide and water. This was succeeded by a moderate saline aqueous fluid which caused the mineralization by exchange of metal ions for Na⁺(Ca²⁺, K⁺). A negative correlation between salt content in fluid inclusions and Na₂O concentrations in the bulk rocks supports this model. Mass balance calculations for this interaction yield a minimum fluid-rock ratio of approximately 2 : I. Greisenization took place at a minimum pressure of 180 MPa (1.8 kb) and in a temperature range between 200 and < 400 °C.

---

Fluid-Gestein-Wechselwirkung in dem Molybdänit führenden Greisenkomplex Nebelstein, Böhmische Masse (Österreich)

Zusammenfassung Die Molybdänglanz führenden Greisengesteine des Nebelsteins sind an peraluminöse Granite gebunden. Bei der Alteration der Granite ist für den Übergang Biotitgranit zu Greisen eine weitestgehende Verarmung an Na zu beobachten, gleichzeitig nehmen auch die Gehalte an Ca, Mg, Sr und Ti ab. Die fortschreitende Greisenbildung dokumentiert sich in den wäßrigen Flüssigkeitseinschlüssen durch steigende Salinität bei sinkenden Homogenisierungstemperaturen. Die fluide Phase war vor der Greisenbildung H₂O dominiert und niedrig salinar. Der Beginn der Alterationsprozesse ist durch CO₂ und H₂O hältige Fluide gekennzeichnet. Danach folgt ein Anstieg der Salinität, der auf den Austausch von Metallchloridlösungen gegen Na⁺, K^- und Ca^2- zurückgeführt wird. Dies läßt sich durch eine negative Korrelation der Salinität in den Flüssigkeitseinschlüssen mit dem Na-Gehalt der Gesteine belegen. Daraus wurde die Volumsbeziehung der den Granit durchströmenden fluiden Phase relativ zum Gestein mit mindestens 2 : 1 abgeleitet. Die Mineralisation fand bei einem Minimaldruck von 1,8 kb in einem Temperaturbereich von 200 - < 400 °C statt.

---

---

This paper was presented at the IGCP 291 Project Symposium Metamorphic Fluids and Mineral Deposits, ETH Zürich, March21–23,1991.     

Water-rock interaction in a zone of lateral flow: A natural example from the active geothermal field and gold-mineralized zone of Beppu (Kyushu Island,Japan)

Summary Beppu is a water-dominated active geothermal system in Kyushu (Japan). Gold mineralization exists in places within altered Pleistocene volcanites in the southernmost part of this field. A shallow 300 m well was drilled in an alluvial fan deposit made up of unsorted volcanic clasts of andesite and dacite. Water and core samples were collected and a temperature log was carried out. In the depth range of 150-230 m and at temperatures of 126-148° C the main authigenic minerals are quartz, calcite, K-feldspar, mixed layers illite/smectite, stilbite and pyrite. The chemical data of the waters indicate that mixing occurs between shallow bicarbonate waters and deep Na-Cl geothermal waters in the outflow zone. The authigenic mineral assemblages found in the well are analogous to those found in the epithermal gold deposits of southern Kyushu. Au concentration data for the hydrothermal springs of Beppu (0.53 g/kg) indicate that the fluids found in the borehole at 148° C could theoretically deposit gold. It is reasonable to hypothesise that a process of mixing between deep Na-Cl fluids and shallow Ca-HCO₃-SO₄ fluids were responsible for massive silicate deposition, accompanied in places by Au mineralizations.

---

Wasser-Gesteins-Wechselwirkung in einer Zone lateraler Fließbewegung: ein natürliches Beispiel aus der aktiven Geothermal-Golderz-Zone von Beppu (Kyushu, Japan)

Zusammenfassung Beppu ist ein geothermales System auf der Insel Kyushu, Japan, in der Wasser die dominante Rolle spielt. Goldvererzungen treten stellenweise in umgewandelten pleistozänen Vulkaniten im südlichsten Teil des Gebietes auf. Ein 300 m tiefes Bohrloch wurde in einem alluvialen Sedimentations-Fächer, der aus unsortierten vulkanischen Klasten, aus Andesit und Dazit besteht, niedergebracht. Wasserproben und Kernproben wurden genommen und die Temperaturen im Bohrloch systematisch gemessen. In Tiefen von 150–230 m und bei Temperaturen von 126–148°C sind die wichtigsten autigen gebildeten Minerale Quarz, Calcit, K-Feldspat, Illit/Smectit, Stilbit und Pyrit. Der Chemismus der Wässer zeigt, daß eine Mischung zwischen seichten Bikarbonat-Wässern und aus der Tiefe stammenden Na-Cl geothermalen Wässern erfolgt. Die autigenen Mineralassoziationen in diesem. Bohrloch sind vergleichbar mit denen in epithermalen Goldlagerstätten des südlichen Kyushu. Auf der Basis von existierenden Goldkonzentrationsdaten für die hydrothermalen Quellen auf Beppu (0.53 g/kg) läßt sich zeigen, daß die Fluide, die in dem Bohrloch bei 148 angetroffen wurden, theoretisch Gold absetzen könnten. Daher läßt sich die Theorie vertreten, daß Mischungsvorgänge zwischen einem aus der Tiefe stammenden Na-Cl Fluid und einem oberflächennahen Ca-HCO₃-SO₄ Wasser für die massive Silikatausscheidung verantwortlich waren, die stellenweise von Goldmineralisation begleitet wurden.

---

---

Contribution No 4. Foreign Visiting Scientist Section, Beppu Geophysical Research Laboratory, Kyoto University.

---

This paper was presented at the IGCP 291 Project Symposium Metamorphic Fluids and Mineral Deposits, ETH Zurich, March 21–23, 1991.     

Fractionation of carbon isotopes by phytoplankton and estimates of ancient CO2 levels

Reports of the 13C content of marine particulate organic carbon are compiled and on the basis of GEOSECS data and temperatures, concentrations, and isotopic compositions of dissolved CO2 in the waters in which the related phytoplankton grew are estimated. In this way, the fractionation of carbon isotopes during photosynthetic fixation of CO2 is found to be significantly correlated with concentrations of dissolved CO2. Because ancient carbon isotopic fractionations have been determined from analyses of sedimentary porphyrins [Popp et al., 1989], the relationship between isotopic fractionation and concentrations of dissolved CO2 developed here can be employed to estimate concentrations of CO2 dissolved in ancient oceans and, in turn, partial pressures of CO2 in ancient atmospheres. The calculations take into account the temperature dependence of chemical and isotopic equilibria in the dissolved-inorganic-carbon system and of air-sea equilibria. Paleoenvironmental temperatures for each sample are estimated from reconstructions of paleogeography, latitudinal temperature gradients, and secular changes in low-latitude sea surface temperature. It is estimated that atmospheric partial pressures of CO2 were over 1000 micro atm 160 - 100 Ma ago, then declined to values near 300 micro atm during the next 100 Ma. Analysis of a high-resolution record of carbon isotopic fractionation at the Cenomanian-Turonian boundary suggests that the partial pressure of CO2 in the atmosphere was drawn down from values near 840 micro atm to values near 700 micro atm during the anoxic event.     

TREK: A cosmic-ray experiment on the Russian space station MIR

The goals of the TREK experiment, now in place on the MIR Space Station, are to resolve and measure the composition of both odd-Z and even-Z cosmic-ray nuclei up to uranium, to measure the isotopic composition of Fe-group nuclei, and to search for transuranic nucleic and exotic particles such as strangelets. To collect tracks of ultraheavy cosmic rays, exterior panels holding an array of BP-1 phosphate glass 1.2m² in area and 16 plates thick are now mounted outside the Kvant-2 module on MIR. Heaters and relays regulate the temperature of the glass at 25°±5°C. The detectors will record 10³ cosmic-ray tracks withZ50 during 2.5 years. An interior panel consisting of an array 0.09 m² in area and 32 plates thick and mounted on the inside wall of the Soyuz spacecraft (attached to the Space Station) will collect tracks of about 13000 Fe and 500 Ni nuclei.     

Ridge belt tectonics of Ganiki Planitia on Venus

The main major ridge belts of Ganiki Planitia on Venus (Lama, Ahsonnutli and Pandrosos Dorsa) are part of the fan-shaped ridge belt complex along the 200 parallel of longitude. These ridge belts with evidence of crustal shortening support the idea of a large-scale E-W compression. The ridge belt patterns indicate a N-S shear component. These forces are explained by a triangular planitia area which compressed by surrounding terrains. The crustal shortening and ridge belt formation indicates compressional plate movement stresses in the uppermost lithosphere.Three sizes of ridge belt structure are to be found within Ganiki Planitia. (1) The ridge belt spacing of 200–400 km can be used to estimate the depth of the major uppermost homogeneous layer of Venus. There are numerous volcanic coronae, paterae and montes located along the main ridge belts or at their junctions. (2) Mid-size ridge groups or subbelts are to be found within the major ridge belts. These are formed by more local responses to tectonic stresses in the stratified uppermost crust. A wavelength of 40–70 km can be seen as a result of bending of the crustal strata and may relate to its thickness. (3) Small individual ridges are connected with most local stresses, defining places where the surface layers broke along the crests of large ridge belts or mid-scale subbelts. Radial and concentric mare ridge-like structures around coronae indicate that corona formation was effective at a sufficiently close vicinity to fault the surface.     

An exact solution of the equation of transfer with three-term scattering indicatrix in an exponential atmosphere

The general equation for radiative transfer in the Milne-Eddington model is considered here. The scattering function is assumed to be quadratically anisotropic in the cosine of the scattering angle and Planck's intensity function is assumed for thermal emission. Here we have taken Planck's function as a nonlinear function of optical depth, viz.,B _v(T)=b _o+b ₁ e ^–. The exact solution for emergent intensity from the bounding face is obtained by the method of the Laplace transform in combination with the Wiener-Hopf technique.     

Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area,Venus: Results from Arecibo image data

New radar images obtained from the Arecibo Observatory (resolution 1.5–4.0 km) for portions of the southern hemisphere of Venus show that: the upland of Phoebe Regio contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension; Alpha Regio, the only large region of tessera within the imaged area, is similar to tessera mapped elsewhere on the planet and covers a smaller percentage of the surface than that observed in the northern high latitudes; the upland made of Ushas, Innini and Hathor Montes consists of three distinct volcanic constructs; Themis Regio is mapped as an ovoid chain of radar-bright arcuate single and double ring structures, edifices and bright lineaments. This area is interpreted as a region of mantle upwelling and on the basis of apparent split and separated features, a zone of localized faulting and extension. Linear zones of deformation in Lavinia Planitia are characterized by lineament belts that are often locally elevated, are similar to ridge belts mapped in the northern high latitudes and are interpreted to be characterized mainly by compression; radar-bright lava complexes within Lavinia Planitia are unique to this part of the planet and are interpreted to represent areas of eruption of high volumes of extremely fluid lava; the upland of Lada Terra is bound to the north by a linear deformation zone interpreted as extensional, is characterized by large ovoids and coronae, is interpreted to be associated with an area of mantle upwelling, and is in contrast to the northern high latitude highland of Ishtar Terra. Regions of plains in the southern hemisphere cover about 78%; of the mapped area and are interpreted to be volcanic in origin. Located within the area imaged (10–78 S) are 52 craters interpreted to be of impact origin ranging from 8 to 157 km in diameter. On the basis of an overall crater density of 0.94 craters/10⁶ km², it is determined that the age of this part of the Venus surface is similar to the 0.3 to 1.0 billion year age calculated for the equatorial region and northern high latitudes. The geologic characteristics of the portion of the Venus southern hemisphere imaged by Arecibo are generally similar to those mapped elsewhere on the planet. This part of the planet is characterized by widespread volcanic plains, large volcanic edifices, and zones of linear belt deformation. The southern hemisphere of Venus differs from northern high latitudes in that tessera makes up only a small percentage of the surface area and the ovoid chain in Themis Regio is unique to this part of the planet. On the basis of the analysis presented here, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales (ovoids, region made up of Ushas, Innini and Hathor Montes), upwelling and extension (Themis Regio) and localized compression (lineament belts in Lavinia Planitia).     

Cluster analysis of the space-time distribution of sunspot groups during solar cycle no. 20

Cluster analysis (a Bayesian iteration procedure) was used to study the space-time distribution of sunspot groups in the time interval from 1965 to 1977. (Data were taken from the Greenwich and Debrecen Heliographic Results.) The distribution proved to be significantly non-random for the 8–10 groups cluster^–1 (gr cl^–1) level of clustering. Convincing evidence also favours non-random behaviour for other levels of clustering from the lowest (3–4 gr cl^–1) up to the highest ( 150 gr cl^–1) level. The rotation rate of the non-random pattern is generally slightly lower than the Carrington rate.The 8–10 gr cl^–1 level, crudely corresponding to the sunspot nests investigated earlier, was studied in more detail. The cycle- and latitude-averaged rotational rate of the nests is slightly ( 1%) but significantly lower than the Carrington rate. Their differential rotation is strongly reduced: the cycle-averaged rotational rate varies only by 2–3% within the sunspot belt. A slight but significant bimodality is seen in the differential rotation curve: the intermediate latitudes ( 10°–20°) show a somewhat slower rotation than both the equatorial and the higher latitude regions. This might be explained by a time-dependence of the rotation rate coupled with the butterfly diagram.     

Exact solution of the equation of transfer in a finite exponential atmosphere by the method of laplace transform and linear singular operators

An approximate solution of the transfer equation for coherent scattering in stellar atmospheres with Planck's function as a nonlinear function of optical depth, viz.,

Geologic features and durability of limestones at the sphinx

Geologic features considered to influence durability of the limestone at the sphinx are depositional history, evolution of porosity, and development of joints. These strata have two orthogonal groups of vertical joints. Where these joints intersect, wedge-shaped blocks are separating, causing loss of material from the core. Major reduction of the sphinx, however, is occurring due to salt crystallization aided by the ink-bottle pore systems prevailing in these rocks.The weathering profile exhibits alternating layers, less and more highly weathered. The less weathered rock is a biomicritic grainstone with smaller quantities of halite and gypsum and a larger large-pore-to-throat ratio than the indented, predominantly micritic, layers with larger concentration of salts and a smaller large-pore-to-throat ratio. Based upon poresize distributions, pressures generated in the pores have been calculated using thermodynamic principles, and an equation has been derived that provides a quantitative measure of durability of these rocks.