Autonomous orbit determination is the ability of navigation satellites to estimate the orbit parameters on-board using inter-satellite link (ISL) measurements. This study mainly focuses on data processing of the ISL measurements as a new measurement type and its application on the centralized autonomous orbit determination of the new-generation Beidou navigation satellite system satellites for the first time. The ISL measurements are dual one-way measurements that follow a time division multiple access (TDMA) structure. The ranging error of the ISL measurements is less than 0.25 ns. This paper proposes a derivation approach to the satellite clock offsets and the geometric distances from TDMA dual one-way measurements without a loss of accuracy. The derived clock offsets are used for time synchronization, and the derived geometry distances are used for autonomous orbit determination. The clock offsets from the ISL measurements are consistent with the L-band two-way satellite, and time–frequency transfer clock measurements and the detrended residuals vary within 0.5 ns. The centralized autonomous orbit determination is conducted in a batch mode on a ground-capable server for the feasibility study. Constant hardware delays are present in the geometric distances and become the largest source of error in the autonomous orbit determination. Therefore, the hardware delays are estimated simultaneously with the satellite orbits. To avoid uncertainties in the constellation orientation, a ground anchor station that “observes” the satellites with on-board ISL payloads is introduced into the orbit determination. The root-mean-square values of orbit determination residuals are within 10.0 cm, and the standard deviation of the estimated ISL hardware delays is within 0.2 ns. The accuracy of the autonomous orbits is evaluated by analysis of overlap comparison and the satellite laser ranging (SLR) residuals and is compared with the accuracy of the L-band orbits. The results indicate that the radial overlap differences between the autonomous orbits are less than 15.0 cm for the inclined geosynchronous orbit (IGSO) satellites and less than 10.0 cm for the MEO satellites. The SLR residuals are approximately 15.0 cm for the IGSO satellites and approximately 10.0 cm for the MEO satellites, representing an improvement over the L-band orbits. 相似文献
An accurate determination of water content in garnet is critical to quantify the transport of water to the deep mantle by the subducted oceanic crust beyond the breakdown of hydrous phases. Fourier transform infrared spectroscopy (FTIR) is the most widely used approach to determine the species and contents of water in garnet. Accurate quantification of OH in garnet requires independent calibration using an external method, as OH absorbance is mineral and composition specific. To obtain the infrared absorption coefficients of structural hydroxyl in garnet, a combined study of spectrometric analyses by FTIR and a method combining a thermal conversion elemental analyser with isotope ratio mass spectrometry (TC/EA-MS) was carried out for fourteen gem-quality natural garnet crystals with variable compositions. The obtained molar absorption coefficients were 9322 ± 338 and 240 ± 26 l mol−1 cm−2 for grossular- and spessartine-rich garnet and pyrope-almandine garnet, respectively. These results are within the range of previous studies. A new molar absorption coefficient of 689 ± 177 l mol−1 cm−2 was obtained for pyrope-spessartine garnet. The large variation in the absorption coefficient indicates it is controlled by both garnet composition and OH-absorption bands. The obtained absorption coefficients are only appropriate for certain types of eclogitic garnet, and more studies should be carried out on eclogitic garnets. 相似文献
Landslides - In tectonically active steep mountain belts, such as those in west Sichuan in China, frequent landslide disasters can occur during the rainy season. High-locality landslides often... 相似文献
On 27 March 2021, a landslide with a volume of approximately 2?×?104 m3 occurred in Guocun Village next to Kengheng road in Tonglu County, Zhejiang Province, China. The landslide caused no casualties as a result of timely road closures, because of the unusual noises detected early by local residents. The motion mechanism of the landslide was studied using video analysis. Slope cutting resulting from road construction might have been the major triggering factor for the landslide. The intrusion of magma and the uplift process of Huangshan led to the metamorphism of mudstone to easily fractured slate, and the brittle layered slate might have controlled the change of motion from transitional sliding to dry debris flow.
Acta Geotechnica - Recently, incentives have been provided in many countries, including Canada and Denmark, to produce biochar for construction usage. This is done because biochar is carbon... 相似文献
Acta Geotechnica - The squeezing behavior of surrounding rock can be described as the time-dependent large deformation during tunnel excavation, which appears in special geological conditions, such... 相似文献