Carbon isotope composition of Upper Cambrian to Lower Ordovician carbonate in Korea,and its bearing on the Cambrian–Ordovician boundary and Lower Ordovician paleoceanography

This study presents an example of locating Cambrian–Ordovician boundary in the lower Paleozoic carbonate succession in Korea using carbon isotope stratigraphy. The Yeongweol Unit of the lower Paleozoic Joseon Supergroup comprises the Upper Cambrian Wagok Formation and the Lower Ordovician Mungok Formation in the Cambrian–Ordovician transition interval. Conventionally, the boundary was placed at the lithostratigraphic boundary between the two formations. This study reveals that the boundary is positioned in the basal part of the Mungok Formation based on the carbon isotope stratigraphy coupled with biostratigraphic information of conodont and trilobite faunas. The δ¹³C curve of the Lower Ordovician Mungok Formation shows a similar trend to that of the coeval stratigraphic interval of Argentine Precordillera (Buggisch et al., 2003), suggesting that the δ¹³C curve of the Mungok Formation reflects the Early Ordovician global carbon cycle.     

Investigation of CO2 behavior and study on design of optimal injection into Gorae-V aquifer

This study presents the Bottom-hole pressure (BHP) behavior with different wettabilities and the optimal design scheme to effectively inject CO₂ into the Gorae-V aquifer. As a result, the injection rate and injectivity were increased as the wettability condition became more water-wet. However, the more wettability condition becomes water-wet, the more the ultimate CO₂ injection volume decreases. When the injectivity was 346 ton/day/Mpa at the Gorae-V aquifer, the aquifer can sustain CO₂ injection at a rate of 2,425 tons per day over this time period. A design for a complete CCS system was developed based on the existing off-shore pipeline in combination with new on-shore CO₂ transport infrastructure, and a pressure of 12.8 MPa is required at the CO₂ source to maintain this injection rate.     

Tracing origins of sewage and organic matter using dissolved sterols in Masan and Haengam Bay,Korea

Masan and Haengam Bays in Korea are highly polluted and semi-enclosed. Domestic and industrial effluents are directly or indirectly discharged into the bays through sewage treatment plants (STP) and creeks. In this study, 15 dissolved sterol compounds were determined in order to understand their sources and relative contribution. Freshwater samples were taken from 13 creeks and at two STP sites on a monthly basis. Total dissolved sterol concentrations ranged from 993 to 4158 ng/L. The concentrations of sterols in winter were higher than in summer. Among the sterols analyzed, cholesterol, β-sitosterol, coprostanol and cholestanone were major compounds in creek water. Seawater samples were concurrently collected at 21 stations in Masan Bay. Total sterol concentrations ranged 118–6,956 ng/L. Inner bay showed high concentrations of sterols in summer, while outer bay showed high sterol concentrations in winter. Among the sterols, cholesterol, β-sitosterol and brassicasterol were major compounds in seawater. In order to examine the contribution of urban sewage, the concentration of coprostanol and fecal sterol ratios were calculated. Most of the creek water, inner bay and near STP outlet samples were affected by sewage. Terrestrial organic matters accounted for a high proportion of dissolved organic matter origin. Fecal origins were relatively high in the inner bay areas and in the STP outlet, while sterols of marine origin were high in the outer bay areas.     

FT-IR measurements of cold C3H8 cross sections at 7–15 μm for Titan atmosphere

We present absorption cross sections of propane (C₃H₈) at temperatures from 145 K to 297 K in the 690–1550 cm⁻¹ region. Pure and N₂-broadened spectra were measured at pressures from 3 Torr to 742 Torr using a Bruker IFS125 FT-IR spectrometer at JPL. The gas absorption cell, developed at Connecticut College, was cooled by a closed-cycle helium refrigerator. The cross sections were measured and compiled for individual spectra recorded at various experimental conditions covering the planetary atmosphere and Titan. In addition to the cross sections, a propane pseudoline list with a frequency grid of 0.005 cm⁻¹, was fitted to the 34 laboratory spectra. Line intensities and lower state energies were retrieved for each line, assuming a constant width. Validation tests showed that the pseudoline list reproduces discrete absorption features and continuum, the latter contributed by numerous weak and hot band features, in most of the observed spectra within 3%. Based on the pseudoline list, the total intensity in the 690–1550 cm⁻¹ region was determined to be 52.93 (±3%) × 10⁻¹⁹ cm⁻¹/(molecule cm⁻²) at 296 K; this value is within 3% of the average from four earlier studies. Finally, the merit of the pseudoline approach is addressed for heavy polyatomic molecules in support of spectroscopic observation of atmospheres of Titan and other planets. The cold cross sections will be submitted to the HITRAN database (hitran.harvard.edu), and the list of C₃H₈ pseudolines will be available from a MK-IV website of JPL (http://mark4sun.jpl.nasa.gov/data/spec/Pseudo).     

Composition and source identification of polycyclic aromatic hydrocarbons in mangrove sediments of Peninsular Malaysia: indication of anthropogenic input

This is a comprehensive study of the composition, origin and sources of specific polycyclic aromatic hydrocarbons (PAHs) in sediments of mangrove estuary in the western part of Peninsular Malaysia. Mangrove sediments were analyzed for 17 PAHs by gas chromatography–mass spectrometry. Total PAH concentrations in the sediments ranged from 20 to 112 ng/g on a dry-weight basis. High molecular weight PAHs were abundant in the sediments. Parent PAH ratios revealed that pyrogenic input has important contribution to the sedimentary PAHs. Ratios of alkylated PAHs indicate that the sedimentary PAHs were influenced by petrogenic PAHs, which implies that petrogenic input has contribution to the sedimentary PAHs but that it is not a major factor in distribution of PAHs within the estuary. Combustion-derived PAHs show a positive and very strong correlation with total PAHs (R ² = 0.926, p < 0.05). Total methylphenanthrenes show very weak correlation with total PAHs (R ² = 0.0928, p < 0.05). The PAH concentrations were found to increase with distance from the upstream of the estuary to the coastal area of the Straits of Malacca. For the assessment of sediment contamination using biological thresholds, none of the individual studied PAH compounds exceeded the values of the effect range low–effect range median guideline and the threshold effects level–probable effects level guideline. This study demonstrates that the sediments of the mangrove ecosystem facing the Straits of Malacca and Sumatra are influenced by anthropogenic PAH inputs as a result of human activities such as biomass burning, vehicle emissions and boating activities.     

Predicting natural arsenic contamination of bedrock groundwater for a local region in Korea and its application

A logistic regression model for the probability of arsenic exceeding the drinking water guidelines (10 μg/L) in bedrock groundwater was developed for a selected county in Korea, where arsenic occurrence and release reactions have been investigated. Arsenic was enriched naturally by the oxidation of sulfide minerals in metasedimentary rocks and mineralized zones, and due to high mobility in alkaline pH conditions, concentrations were high in groundwater of the county. When considering these reactions of arsenic release and water quality characteristics, several geological and geochemical factors were selected as influencing variables in the model. In the final logistic regression model, geological units of limestone and metasedimentary rocks, the concentrations of nitrate and sulfate, and distances to closed mines and adjacent granite were retained as statistically significant variables. Predicted areas of high probability agreed well with known spatial contamination patterns in the county. The model was also applied to an adjacent county, where the groundwater has not previously been tested for the presence of arsenic, and a probability map for arsenic contamination was then produced. Through the analysis of arsenic concentrations at the wells of high probability, it was determined that the applied model accurately indicated the arsenic contamination of groundwater. The logistic regression approach of this study can be applied to predict arsenic contamination in areas of similar geological and geochemical conditions to the county used in this model.     

An integrated multi-azimuth VSP study for fracture characterization in the vicinity of a well

We present the analysis of a multi-azimuth vertical seismic profiling data set that has been acquired in a tight gas field with the objective of characterizing fracture distributions using seismic anisotropy. We investigate different measurements of anisotropy, which are shear-wave splitting, P-wave traveltime anisotropy and azimuthal amplitude variation with offset. We find that for our field case shear-wave splitting is the most robust measure of azimuthal anisotropy, which is clearly observed over two distinct intervals in the target. We compare the results of the vertical seismic profiling analysis with other borehole data from the same well. Cross-dipole sonic and Formation MicroImager data from the reservoir section suggest that no open fractures intersect the well or are present within half a metre of the borehole wall. Furthermore, a detailed dispersion analysis of the sonic scanner data provides no indication of stress-induced seismic anisotropy along the logged borehole section. We therefore explain the azimuthal anisotropy measured in the vertical seismic profiling data with a model that contains discrete fracture corridors, which do not intersect the well itself but lie within the vertical seismic profiling investigation radius. We show that such a model can reproduce some basic characteristics of azimuthal anisotropy observed in the vertical seismic profiling data. The model is also consistent with well test data that suggest the presence of a fracture corridor away from the well. With this study we demonstrate the necessity of integrating different data types that investigate different scales of rock volume and can provide complementary information for understanding the characteristics of fracture networks in the subsurface.     

Performance-based concept on seismic evaluation of existing bridges

Conventional seismic evaluation of existing bridges explores the ability of a bridge to survive under significant earthquake excitations. This approach has several major drawbacks, such as only a single structural performance of near collapse is considered, and the simplified approach of adopting strength-based concept to indirectly estimate the nonlinear behavior of a structure lacks accuracy. As a result, performance-based concepts that include a wider variety of structural performance states of a given bridge excited by different levels of earthquake intensity is needed by the engineering community. This paper introduces an improved process for the seismic evaluation of existing bridges. The relationship between the overall structural performance and earthquakes with varying levels of peak ground acceleration (PGA) can successfully be linked. A universal perspective on the seismic evaluation of bridges over their entire life-cycle can be easily obtained to investigate multiple performance objectives. The accuracy of the proposed method, based on pushover analysis, is proven in a case study that compares the results from the proposed procedure with additional nonlinear time history analyses.     

Comparison of sedimentation-compression curves obtained by nuclear and gravimetric methods for Wilkinson Basin,Gulf of Maine,sediments

Accurate measurements of bulk density are important in the construction of sedimentation-compression curves of water-saturated, fine-grained cohesive sediments for consolidation studies. The bulk density of five cores was measured nondestructively on a laboratory nuclear transmission densitometer and the water content, expressed as void ratio, was derived from an empirical relationship between bulk density and water content. Bulk density and water content measured destructively was determined every 10 cm for a comparison with the nuclear data. Agreement between nuclear and gravimetric methods was within ± 0.02 g/cm³ for bulk density ranging from 1.2 to 1.4 g/cm³. Sedimentation-compression curves made using both methods were in generally good agreement.In the Wilkinson Basin, void ratio gradually decreases with increasing effective overburden pressure. This indicates that consolidation by dewatering the surficial sediments is normal and that the environmental conditions during deposition remained relatively constant.