Calorimetric study of the coesite-stishovite transformation and calculation of the phase boundary

High temperature drop-solution calorimetry in molten 2 PbO · B₂O₃ at 1044 K for coesite and stishovite polymorphs of silica was carried out to determine the enthalpy of the coesite-stishovite transition. These experiments were performed on high-purity, single-phase samples of coesite and stishovite. Our new value for the enthalpy of the coesitestishovite transition (ΔH ₂₉₈ ⁰ ) is 29.85 ± 0.78 kJ/mol, which is about 35% lower than previously reported by Akaogi and Navrotsky (1984) and Holm et al. (1967), but which compares well with new measurements by Akaogi et al. (1994b). Using these new data, we have calculated the equilibrium phase boundary between coesite and stishovite and obtained a slope, dP/dT=0.0031 (2) GPa/K. This calculated slope is in good agreement with that determined [0.0026 (2) GPa/K] from the in-situ X-ray diffraction study of Zhang et al. (1996).     

SOME NEW UNDERSTANDINGS OF LAND-SURFACE PROCESSES IN ARID AREA FROM THE HEIFE*

The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China) is given in the paper.The following basic subjects for land-surface processes in arid areas are studied:(1) the general characteristics of the energy budget on ground surface in arid areas;(2) the parameterization of the land surface processes;(3) the interaction between oasis and its desert circumstances,a special phenomenon in arid areas.The analysis shows that the sensible heat flux in the surface energy budget is in the majority,and the latent heat flux may be neglected.The influence of atmospheric stratification stability on the turbulent transfer of energy and substance must be considered in parameterization of land surface processes in arid areas.The "cold island effect" phenomenon in oasis and the "humidity inversion" phenomenon in desert near oasis are the result of the interaction between them.The results would improve the understanding of land surface processes in arid areas.     

暖切变型江淮梅雨锋结构及其形成和维持机制

对在1991年7月上旬特别稳定的梅雨形势下持续10天的特大暴雨期作了合成和典型过程研究,并进一步探讨了暖切变型江淮梅雨锋天气系统模型。它在自由大气层表现为结构竖立的相当正压切变线和一种不同于经典地转动量近似的带状准二维运动场。边界层的浅层锋生倾斜环流以及偏于切变线轴以南的Ekman抽吸与自由大气层中基本上由积云对流加热驱动的竖直环流相互依存和耦合,造成持续的大暴雨。这种系统的初生和中断后复苏的机制可能是由斜压性极弱的副热带高空东移的短波扰动在低层“湿度锋”带紧南侧触发导致的一种带状CISK。     

Arctic haze: Perturbation to the radiation field

Summary A model of the polluted arctic troposphere is constructed to estimate the magnitude and seasonal variation of the climate forcing function of arctic haze. Using a pill-box bathtub model for the Arctic and envisioning it to be filled with pollution from industrial sources in Eurasia, we estimate that maximum climate perturbation from arctic contamination occurs in the spring months. The major perturbation to the radiation budget is a lowering of the albedo (heating) of the earth-atmosphere system around the vernal equinox and is due to a trace amount (about 5% by mass) of black carbon associated with the removal-resistant submicron mode of aerosols. The black carbon over the reflecting polar ice/snow introduces a heating of about 1.5 degree per day into the haze layer.With 8 Figures     

地铁施工对济南白泉泉群流量的影响

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。     

杨山晚古生代沉积盆地成因类型及其与桐柏-大别造山带关系的探讨

杨山晚古生代沉积盆地位于桐柏-大别山北麓,它具有明显的前陆盆地沉积特点,由早期(D₂?—C₁)的复理石建造到晚期(C₁—P?)的磨拉石建造;古生物地理分析表明其与华北、扬子陆块都有密不可分的联系,其间不可能有古洋盆的存在,因而它应当是桐柏一大别造山带碰撞造山过程中形成的前陆盆地。杨山晚古生代前陆盆地的形成说明,扬子陆块和华北陆块的陆-陆碰撞起始于晚泥盆世之前(S₃—D₂),而桐柏-大别造山带中生代的构造事件则可能代表一次大规模陆内逆冲-推覆作用。     

我国藻菌生物成因的金矿研究

生物成矿作用分为生物直接成矿作用和生物间接成矿作用,生物直接成矿作用的标志结构为生物有机胶体结构。生物间接成矿作用的标志结构为“矿交代生物”结构,我国陕西二台子－半仓沟金矿,四川东北寨金矿、川甘拉尔玛金矿和云南金厂金矿等均为典型为实例,矿石中普遍含有多种金属矿物生物结构,还含多种生物有机组分。成矿物质具有多源性特征,硫同位素具混合型特征,矿床成型机制可与“人工碳吸附系统”聚金机制相类比,含金层位可     

Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.     

冀西北长城纪宣龙式铁矿层中微体植物化石的发现及其意义

本文研究的是笔者等在冀西北长城系串岭沟组宣龙式铁矿层中发现的微体植物化石,这些化石都保存在铁质叠层石(肾状赤铁矿)和铁质核形石(鲕状赤铁矿)的基本层中。微化石以丝状体为主,部分为球状体。归属于原核生物蓝藻门颤藻科的两个属和色球藻科的一个属。化石层同位素年龄约在1800—1757Ma。这些化石与北美冈弗林特组微化石比较,既有些相似,又有些区别。该化石的发现为研究铁矿的成因,指示沉积环境及层位对比都很有意义。     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.