Rock-magnetic properties of topsoils and urban dust from Morelia (>800,000 inhabitants), Mexico: Implications for anthropogenic pollution monitoring in Mexico’s medium size cities

In this work, we investigate the correlation between some magnetic parameters and the level of contamination by heavy metals in urban soils from Morelia city, western Mexico. The magnetic study was carried out on 98 urban soils samples belonging to distinct land uses. Most of analyzed samples contain ferrimagnetic minerals as the responsible for magnetization, most probably corresponding to the titanomagnetites/ titanomaghemites solid solutions. This is inferred from the susceptibility vs. temperature measurements and the isothermal remanent magnetization (IRM) experiments. These measurements also indicate that most of samples are almost completely saturated before 300 mT. Additionally, the S_-200 values (S_-200 = IRM_-200/ SIRM, where IRM_-200= Back-field of 200 mT after magnetic saturation) are between 0.7 and 1.0, characteristic of low coercivity magnetic minerals. The averaged saturation isothermal remanent magnetization (SIRM) curves can be used as an indicator of pollution level, as these curves show different saturation values according to the level of contamination by heavy metals: Cu, Ni, Cr and Sr. These associations of (titano)magnetite with heavy metals were observed by Scanning Electron Microscope revealing some complex aggregates rather than commonly detected spherules.     

On the vertical structure of the Rhine region of freshwater influence

An idealised three-dimensional numerical model of the Rhine region of fresh water influence (ROFI) was set up to explore the effect of stratification on the vertical structure of the tidal currents. Prandle’s dynamic Ekman layer model, in the case of zero-depth-averaged, cross-shore velocities, was first used to validate the response of the numerical model in the case of barotropic tidal flow. Prandle’s model predicted rectilinear tidal currents with an ellipse veering of up to 2%. The behaviour of the Rhine ROFI in response to both a neap and a spring tide was then investigated. For the given numerical specifications, the Rhine plume region was well mixed over the vertical on spring tide and stratified on neap tide. During spring conditions, rectilinear tidal surface currents were found along the Dutch coast. In contrast, during neap conditions, significant cross-shore currents and tidal straining were observed. Prandle’s model predicted ellipse veering of 50%, and was found to be a good indicator of ellipticity magnitude as a function of bulk vertical eddy viscosity. The modelled tidal ellipses showed that surface currents rotated anti-cyclonically whereas bottom currents rotated cyclonically. This caused a semi-diurnal cross-shore velocity shearing which was 90° out of phase with the alongshore currents. This cross-shore shear subsequently acted on the horizontal density gradient in the plume, thereby causing a semi-diurnal stratification pattern, with maximum stratification around high water. The same behaviour was exhibited in simulations of a complete spring–neap tidal cycle. This showed a pattern of recurring stratification on neaps and de-stratification on springs, in accordance with observations collected from field campaigns in the 1990’s. To understand the increase in ellipticities to 30% during neaps and the precise shape of the vertical ellipse structure, stratification has to be taken into account. Here, a full three-dimensional numerical model was employed, and was found to represent the effect of de-coupling of the upper and lower layers due to a reduction of mixing at the pycnocline.     

The next step in shallow coral reef monitoring: Combining remote sensing and in situ approaches

Most current coral reef management is supported by mapping and monitoring limited in record length and spatial extent. These deficiencies were addressed in a multidisciplinary study of cyclone impacts on Aboré Reef, New-Caledonia. Local knowledge, high thematic-resolution maps, and time-series satellite imagery complemented classical in situ monitoring methods. Field survey stations were selected from examination of pre- and post-cyclone images and their post-cyclone coral communities documented in terms of substrata, coral morphologies, live coral cover, and taxonomy. Time-series maps of hierarchically defined coral communities created at spatial scales documenting the variability among communities (29-45 classes) and suggesting the processes that affected them. The increased spatial coverage and repeatability of this approach significantly improved the recognition and interpretation of coral communities’ spatio-temporal variability. It identified precise locations of impacted areas and those exhibiting coral recovery and resilience. The approach provides a comprehensive suite of information on which to base reef-scale conservation actions.     

An accurate momentum advection scheme for a z-level coordinate models

In this paper, we focus on a conservative momentum advection discretisation in the presence of z-layers. While in the 2D case conservation of momentum is achieved automatically for an Eulerian advection scheme, special attention is required in the multi-layer case. We show here that an artificial vertical structure of the flow can be introduced solely by the presence of the z-layers, which we refer to as the staircase problem. To avoid this staircase problem, the z-layers have to be remapped in a specific way. The remapping procedure also deals with the case of an uneven number of layers adjacent to a column side, thus allowing one to simulate flooding and drying phenomena in a 3D model.     

The tectono-sedimentary evolution of a hyper-extended rift basin: the example of the Arzacq–Mauléon rift system (Western Pyrenees,SW France)

In this paper, we present a sedimentary and structural analysis that together with maps, sections and new Ar/Ar data enable to describe the tectono-sedimentary evolution of the Mauléon hyper-extended rift basin exposed in the W-Pyrenees. Hyper-extension processes that ultimately resulted in exhuming mantle rocks are the result of the subsequent development of two diachronous detachment systems related to two evolutional stages of rifting. An initial Late Aptian Early Albian crustal thinning phase is first recorded by the development of a crustal necking zone controlled by the north-vergent Southern Mauléon Detachment system. During a subsequent exhumation phase, active faulting migrates to the north with the emplacement of the Northern Mauléon detachment system that exhumed north section thinned continental crust and mantle rocks. This diachronous crustal thinning and exhumation processes are also recorded by the diachronous deposition of syn-tectonic sedimentary tracts above the two supra-detachment sub-basins. Syn-tectonic sedimentary tracts record the progressive exhumation of footwall rocks along detachment systems. Tectonic migration from the southern to the northern Mauléon Detachment system is recorded by the coeval deposition of “sag” deposits above the necking zone basin and of syn-tectonic tracts above exhumed rocks north section. Located on a hanging-wall situation related to the Mauléon hyper-extension structures, the Arzacq Basin also records a major crustal thinning phase as shown by its subsidence evolution so as by deep seismic images. The absence of major top-basement structures and its overall sag morphology suggest that crustal thinning processes occurred by decoupled extension of lower crustal levels contrasting with the Southern Mauléon Detachment system. Reconciling observations from the Mauléon and Arzacq Basins, we finally propose in this paper that they were the result of one and the same asymmetric crustal thinning and exhumation processes, where extension is accommodated into the upper crust in the Mauléon Basin (lower plate basin) and relayed in ductile lower crust below the Arzacq Basin (upper plate basin).     

Going to the Extremes

Projections of changes in climate extremes are critical to assessing the potential impacts of climate change on human and natural systems. Modeling advances now provide the opportunity of utilizing global general circulation models (GCMs) for projections of extreme temperature and precipitation indicators. We analyze historical and future simulations of ten such indicators as derived from an ensemble of 9 GCMs contributing to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR4), under a range of emissions scenarios. Our focus is on the consensus from the GCM ensemble, in terms of direction and significance of the changes, at the global average and geographical scale. The climate extremes described by the ten indices range from heat-wave frequency to frost-day occurrence, from dry-spell length to heavy rainfall amounts. Historical trends generally agree with previous observational studies, providing a basic sense of reliability for the GCM simulations. Individual model projections for the 21st century across the three scenarios examined are in agreement in showing greater temperature extremes consistent with a warmer climate. For any specific temperature index, minor differences appear in the spatial distribution of the changes across models and across scenarios, while substantial differences appear in the relative magnitude of the trends under different emissions rates. Depictions of a wetter world and greater precipitation intensity emerge unequivocally in the global averages of most of the precipitation indices. However, consensus and significance are less strong when regional patterns are considered. This analysis provides a first overview of projected changes in climate extremes from the IPCC-AR4 model ensemble, and has significant implications with regard to climate projections for impact assessments. An erratum to this article is available at . An erratum to this article can be found at     

Potential impacts of climate change on storage conditions for commercial agriculture: an example for potato production in Michigan

Climate change is anticipated to influence all parts of agricultural production systems. However, the potential impacts on crop storage have rarely been assessed, even though storage is an important component of a grower’s marketing strategy and is essential for the continuous supply of a commodity for processors, exporters, and consumers. The Michigan chip-processing potato industry provides an example of the importance of crop storage. Michigan is the largest producer of chip-processing potatoes in the USA, and potatoes are stored on farms from September to June. We use an ensemble of climate projections developed for three future time slices (early, mid, and late century) from 16 climate models forced by three greenhouse gas concentration pathways to assess future changes in potato storage conditions. Our findings indicate an increased future demand for ventilation and/or refrigeration immediately after harvest and again in spring and early summer, even for the early-century time slice. Furthermore, the period of reliably cold storage temperatures during winter is anticipated, when averaged across all models, to shorten by 11–17 days in Michigan’s primary production area and 14–20 days in the more southern secondary area by mid-century, and by 15–29 days and 31–35 days, respectively, for the northern and southern production areas by late century. The level of uncertainty, as indicated by the ensemble range, is large, although the sign of the projected changes in storage parameters is consistent. This case study provides an example of the potentially large effects of climate change on the storage conditions for agricultural commodities.     

Simulating the dispersal of tephra from the 1991 Pinatubo eruption: Implications for the formation of widespread ash layers

PUFF and HAZMAP, two tephra dispersal models developed for volcanic hazard mitigation, are used to simulate the climatic 1991 eruption of Mt. Pinatubo. PUFF simulations indicate that the majority of ash was advected away from the source at the level of the tropopause (~ 17 km). Several eruptive pulses injected ash and SO₂ gas to higher altitudes (~ 25 km), but these pulses represent only a small fraction (~ 1%) of the total erupted material released during the simulation. Comparison with TOMS images of the SO₂ cloud after 71 and 93 h indicate that the SO₂ gas originated at an altitude of ~ 25 km near the source and descended to an altitude of ~ 22 km as the cloud moved across the Indian Ocean. HAZMAP simulations indicate that the Pinatubo tephra fall deposit in the South China Sea was formed by an eruption cloud with the majority of the ash concentrated at a height of 16–18 km. Results of this study demonstrate that the largest concentration of distal ash was transported at a level significantly below the maximum eruption column height (~ 40 km) and at a level below the calculated height of neutral buoyancy (~ 25 km). Simulations showed that distal ash transport was dominated by atmospheric circulation patterns near the regional tropopause. In contrast, the movement of the SO₂ cloud occurred at higher levels, along slightly different trajectories, and may have resulted from gas/particle segregations that took place during intrusion of the Pinatubo umbrella cloud as it moved away from source.