Upper Silesia,a forgotten region in Central Europe

On the map of Europe, forming the south-western border region of Poland, is to be found the name Silesia, with in many cases its southern part emphasized — Upper Silesia. Any search for statistics as to its exact surface area and population size will be in vain. At the end of World War I, Upper Silesia found itself squeezed between two nationalistically-obsessed peoples, and economically too attractive to both to be allowed to play an idependent political role, as it had for centuries. Upper Silesia was in 1921 divided. After World War II, under the communist centralised power system, a completely colonial robber economy was pursued. Because of the coal production there is now here one of the greatest agglomeration areas in Europe, with an ageing heavy industry and a catastropihcally damaged environment.     

Questions concerning the existence of sympathetic flares

Earlier results concerning sympathetic flares - physically related flares occurring in different active regions practically in the same time - and time-correlated radio bursts are compared with magnetic situation in active regions with related flaring and with the history and dynamics of its development. We found observational evidence abou the reality of sympathetic flares, demonstrating also that active regions in which they appear are physically related through common dynamical elements in which the evolution of their magnetic fields goes parallel. Such a process may sometimes occupy a very large volume of the photosphere and we believe that it might be related to the large-scale convective motions.     

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).     

Ozone production due to emissions from vegetation burning

Ozone has been observed in elevated concentrations by satellites over areas previously believed to be background. There is meteorological evidence, that these ozone plumes found over the Atlantic Ocean originate from vegetation fires on the African continent.In a previous study (DECAFE-88), we have investigated ozone and assumed precursor compounds over African tropical forest regions. Our measurements revealed large photosmog layers at altitudes from 1.5 to 4 km. Both chemical and meteorological evidence point to savanna fires up to several thousand km upwind as sources.Here we describe ozone mixing ratios observed over western Africa and compare ozone production ratios from different field measurement campaigns related to vegetation burning. We find that air masses containing photosmog ingredients require several days to develop their oxidation potential, similar to what is known from air polluted by emissions from fossil fuel burning. Finally, we estimate the global ozone production due to vegetation fires and conclude that this source is comparable in strength to the stratospheric input.     

A model of the origin of the Jovian ring

Starting with the assumption that the micron-sized particles which make up the bright Jovian ring are fragments of erosive collisions between micrometeoroid projectiles and large parent bodies, a physical model of the ring is calculated. The physics of high-velocity impacts leads to a well-defined size distribution for the ejecta, the optical properties of which can be compared with observation. This gives information on the ejecta material (very likely silicates) and on the maximum size of the projectiles, which turns out to be about 0.1 μm. The origin of these projectiles is discussed, and it is concluded that dust particles ejected in volcanic activity from Io are the most likely source. The impact model leads quite naturally to a distribution in ejecta sizes, which in turn determines the structure of the ring. The largest ejecta form the bright ring, medium-sized ejecta form a disk extending all the way to the Jovian atmosphere, and the small ejecta form a faint halo, the structure of which is dominated by electromagnetic forces. In addition to the Io particles, interaction with interplanetary micrometeoroids is also considered. It is concluded that μm-sized ejecta from this source have ejection velocities which are several orders of magnitude too large, and thus cannot contribute significantly to the observed bright ring. However, the total mass ejection rate is significant. Destruction of these ejecta by the Io particles may provide additional particles for the halo.     

Spectral investigation of the chromosphere

Several hundred H spectrograms from areas close to the solar limb were taken with the 35 cm Coudé refractor at Anacapri. The 41 spectra with the greatest spatial resolution were selected and analysed. At the supergranular boundaries a considerable fraction of the line profiles were found to correspond to Beckers Cloud Model (BCM). Moreover, the BCM parameters of the dark mottles at the limb appear to be approximately equal to those from the center of the disk. On the other hand, we also obtained evidence in disagreement with the general applicability of the BCM to all features of the chromospheric fine structure.We attempted to present the large set of observational data in a fashion that permits their interpretation by alternative theoretical models.Mitteilungen aus dem Fraunhofer Institut Nr. 151.     

The ion-composition of the plasma produced by impacts of fast dust particles

The composition of the impact plasma produced by fast dust particles (v > 1 km/sec) hitting an Au or W target was measured both with a model of the HELIOS micrometeoroid experiment (low electric field at the target) and a high field detector. The plasma composition and the total plasma charge depend strongly on the impact velocity and the electric field strength at the target. Spectra of 9 different projectile-target combinations were analysed. Two types of spectra could be observed, depending on the projectile material. (1) Spectra of metals and hard dielectrics (Mohs' hardness ? 5). Particle constituents of low ionisation energy (e · u ? 7eV, e.g. Na, K, Al) dominate the spectra of these materials at impact velocities below 10 km/sec. At higher speed the relative intensities change and new ions with higher ionisation energies appear. (2) Spectra of soft dielectrics (Mohs' hardness < 3). Below 9 km/sec these materials produced less total charge than did the others. The highest masses were detected at 74 amu. The relative abundance of ions with low ionization energies such as Li, Na, K, etc. is comparatively small. Negative ions were also observed in the impact plasma. Their total number was found to be approximately 3–6% of that of the positive ions at 6 km/sec particle speed.     

Measurements of peroxyacetylnitrate in the marine boundary layer over the Atlantic

The atmospheric concentration of peroxyacetylnitrate (PAN) was measured during a cruise of the R.S. Polarstern from Bremerhaven (Germany) to Rio Grande do Sul (Brazil) in September/ October 1988. The measurements were made in-situ by a combination of electron capture gaschromatography with a cryogenic preconcentration step. The theoretical lower limit of detection (3) was 0.4 ppt. The mixing ratios of PAN varied by more than three orders of magnitude from 2000 ppt in the English Channel to less than 0.4 ppt south of the Azores (38° N). South of 35° N, PAN levels were below the detection limit, except at 30–31° S off the eastern coast of South America. Here, PAN mixing ratios of 10 to 100 ppt were detected in continentally influenced air masses. Detectable levels of PAN were mostly observed in air masses of continental or high northern origin. Changes in the wind directions were usually associated with substantial changes in the PAN mixing ratios.     

Theory of the local scale parameter method for EDM

The determination of a representative refractive index for the wave path is the main limitation of the attainable accuracy in electronic distance measurement. To overcome this limitation the length ratio method was initially proposed and later developed into the local scale parameter (LSP) method. In this paper, the mathematical model of the LSP method is derived for electro-optical distance measurement from first principles based on the physics of the atmospheric boundary layer. The model does not rely on standard atmospheres. It is shown that atmospheric temperatures and pressures must be observed at instrument stations but not at reflector stations. Appropriate LSP field procedures and the results of some field experiments are summarized. The method consistently produces accuracies of better than ±1 ppm. Use of the method is recommended for high precision (trilateration) networks, which need to be measured repeatedly and where absolute scale is not relevant.     

Current estimates of the Earth's principal moments of inertia

Summary The principal moments of the Earth's inertia and their differences have been computed and their actual accuracy estimated on the basis of the most recent values of the 2nd degree geopotential parameters (model GEM-T2) and of the parameter H in the precession constant. The contributions due to the zero frequency zonal term in the tidal potential have been determined.

---

au m nmnmuaa 2- mnu (¶rt; GEM-T2) u naama nm nuu n¶rt; aua m uuu u u u amu u ¶rt;am u a mmu. u a¶rt; n¶rt; uu nm amu a a nuu nmuaa.