Scour at the head of a vertical-wall breakwater

This paper presents the results of an experimental investigation on the near-bed flow patterns, the bed shear stress amplification and scour around the head of a vertical-wall breakwater, using regular waves. The Keulegan-Carpenter number (KC), based on the diameter of the breakwater head, is found to be the major parameter that governs the flow and the equilibrium scour depth. Basic flow structures are identified as function of KC. The scour depth is found to increase with increasing the Keulegan-Carpenter number. The necessary extent of the conventional stone protection is studied. An empirical formula is worked out for the width of the protection layer as function of KC. Also, the effects of head shape, the angle of attack and the presence of a co-directional current are investigated. The results indicate that the scour depth is increased considerably in the presence of a current. Likewise, the scour depth is increased when the head shape is changed from a round shape to a sharp-edged one. It is found that the angle of attack is also an influencing factor as regards the scour depth.     

Detection of DNA damage in mussels and sea urchins exposed to crude oil using comet assay

The single-cell microgel electrophoresis assay or the comet assay was used to evaluate DNA damage of dispersed crude oil on sea urchins (Strongylocentrotus droebachiensis) and mussels (Mytilus edulis L.). Sea urchins were exposed to 0.06 and 0.25 mg/L dispersed crude oil in a continuous flow system, while the mussels were exposed to 0.015, 0.06 and 0.25 mg/L dispersed crude oil. Sea urchin coelomocytes and mussel haemocytes were sampled after 4 and 5 weeks exposure, respectively. In the sea urchin coelomocytes, there was a significant concentration-related increase in the percentage of DNA in comet tail. In mussel haemocytes, there was a significantly higher percentage of DNA in comet tail for all treatments compared to the control. The responses were concentration-related up to 0.06 mg/L oil. The two highest exposure concentrations of mussels were not significantly different from each other. These results indicate that the comet assay can be used for biomonitoring of DNA damage in marine invertebrates following oil contamination.     

Measurement of the signal to noise ratio in seismic profiling

The measurement of the signal to noise ratio in continuous seismic profiling systems is carried out by means of a small general purpose digital computer equipped with an analog to digital converter. The computer is programmed to compute and compare the power spectrum of a sample of noise to the power spectrum of a sample of noise plus an echo. Power spectra of some twenty to fifty shots are averaged to yield reliable estimates of the signal to noise ratio as a function of frequency. The observed spectra agree well with spectra calculated from signals measured near to an air-gun. This measurement of signal to noise ratio as a function of frequency provides unambiguous information for the adjustment of the necessary band-pass filter thus improving the operation of a continuous seismic profiler.     

Effect of Sea Level Variation on Tidal Characteristic Values for the East China Sea

1 .IntroductionTheglobalairtemperatureroseabout 0 .5～ 0 .6°Coverthepast 2 0thcentury ,andtheglobalmeansealevelincreasedbyabout2 0cmduringtheperiod .Theregionalmeansealevelriseswiththerisingglobalmeansealevel.Zuoetal.( 1 997)indicatedthatthemeanrisingrateofabsolutemeansealevelalongtheChinacoastontheassumptionofunifiedisostaticdatumis 2mm a .Woodworth( 1 999)analyzedsealevelspanning 1 76 8tothepresentinLiverpool,andobtainedaseculartrendforheperiodupto 1 880of0 .39± 0 .1 7mm a ,andatrendfort…     

Mid-Holocene evolution and paleoenvironments of the shoreface–offshore transition, north-eastern Argentina: New evidence based on benthic microfauna

A sedimentary record spanning 5792–5511 cal yr BP and 3188–2854 cal yr BP was recovered at 36° 45′ 43″ S–56 ° 37′ 13″ W, south-west South Atlantic. The sedimentological features and micropaleontological (benthic foraminifera and ostracoda) content were analyzed in order to reconstruct paleoenvironmental conditions. Considerable environmental fluctuations are indicated by all these proxies. Five different stages were distinguished: Stage 1 (ca. 5800–5000 cal yr BP) consists of muddy sand with abundant microfossils. In this interval, species typical for inner marine shelf environments maintained a high abundance. Stage 2 consists of plastic light greenish grey clays barren of microfossils, and probably represents fluvial input from the de la Plata River to the shelf contemporaneous of a lowering of sea level. Stage 3 is composed of brownish yellow sandy silts, and represents increasing marine conditions in the area as reflected by higher faunal diversity and typical foraminifera of inner shelf environments. Stage 4 is made of homogeneous mud, barren of microfossil, which represents a new pulse of fluvial input to the shelf in consequence of a new fall in sea level. The final part of the core (Stage 5) is a coarsening upward sequence, grading from greeny brown clayey sandy silts to coarse shelly sands and represents the modern sedimentation in the area. This interpretation strengthens the stepped model of late-Holocene sea-level fall between 5511–5792 cal yr BP and 2854–3188 cal yr BP in Buenos Aires coast, and agrees with the relative sea-level history previously proposed by some authors from western South Atlantic coasts.     

Oxidative stress in two populations of killifish (Fundulus heteroclitus) with differing contaminant exposure histories

A population of killifish (Fundulus heteroclitus) inhabiting a creosote-polluted inlet of the Elizabeth River demonstrates tolerance to the acute toxic effects exerted by contaminated sediments on reference site killifish. Previous data have suggested that upregulated antioxidant defenses contribute to short-term tolerance in killifish exposed to Elizabeth River sediments. This study investigated population differences in antioxidant defenses from wild caught Elizabeth River and reference population killifish in different seasons, and after being held in the laboratory. Parameters measured in the killifish were total glutathione concentrations (GSH(T)), activities of glutathione reductase (GR), glutathione peroxidase (GPx), and lipid peroxidation (LPO), all in adult hepatic tissues. The Elizabeth River population exhibited greater GSH(T), higher GPx activities, and increased LPO as compared to the reference population. Sex specific population differences were also observed in GSH(T) and GPx. Both populations displayed decreased GSH(T) and increased GR from early to late summer, as well as after being held in the laboratory. This study indicates that there are many factors that may contribute to differences in levels of antioxidant defenses in addition to exposure to contaminants, including reproductive status and environmental conditions.     

A comparison of Hα and soft X-ray characteristics of spotless and spot group flares

A comparative analysis of spotless and spot group flares recorded at Hvar and Kanzelhöhe Observatories during the 21st cycle of solar activity is presented. The rate of occurrence of two-ribbon flares was found to be significantly higher for the spotless flares. In comparison with spot group flares of corresponding H importance, the soft X-ray peak values have been systematically lower for the spotless flares. The highest peak values and the energy released in soft X-rays was found for flares with a H ribbon protruding over a major spot umbra. It was found that the effective plasma temperatures in spotless flares have been considerably lower than the temperatures in spot group flares.     

The University of Durham Southern Hemisphere VHE gamma ray telescope

The design of very high energy (VHE) gamma ray telescopes is discussed and it is shown that a triple-mirror telescope operating in threefold fast coincidence provides an effective instrument. The design, construction and operation of a large VHE gamma ray telescope with an energy threshold of 300 GeV (at the zenith) and incorporating several novel features is described. The use of a coincidence guard ring technique is shown to result in the rejection of about 50% of the off-source (proton) events which form a high background and limit the sensitivity of such telescopes.     

On the longitudinal distribution of the solar surges

After re-examination of data presented by Verma (1984), some misuse of solar parameteres published in Solar Geophysical Data is presented. Consequently some conclusions made by Verma (1984, 1986) on about the longitudinal distribution of cool solar surges based on these misuses are discussed.     

Efficient GOCE satellite gravity field recovery based on least-squares using QR decomposition

We develop and apply an efficient strategy for Earth gravity field recovery from satellite gravity gradiometry data. Our approach is based upon the Paige-Saunders iterative least-squares method using QR decomposition (LSQR). We modify the original algorithm for space-geodetic applications: firstly, we investigate how convergence can be accelerated by means of both subspace and block-diagonal preconditioning. The efficiency of the latter dominates if the design matrix exhibits block-dominant structure. Secondly, we address Tikhonov-Phillips regularization in general. Thirdly, we demonstrate an effective implementation of the algorithm in a high-performance computing environment. In this context, an important issue is to avoid the twofold computation of the design matrix in each iteration. The computational platform is a 64-processor shared-memory supercomputer. The runtime results prove the successful parallelization of the LSQR solver. The numerical examples are chosen in view of the forthcoming satellite mission GOCE (Gravity field and steady-state Ocean Circulation Explorer). The closed-loop scenario covers 1 month of simulated data with 5 s sampling. We focus exclusively on the analysis of radial components of satellite accelerations and gravity gradients. Our extensions to the basic algorithm enable the method to be competitive with well-established inversion strategies in satellite geodesy, such as conjugate gradient methods or the brute-force approach. In its current development stage, the LSQR method appears ready to deal with real-data applications.