Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.     

Mineralogical and Geochemical Constraints on the Sediment Sources of Late Stone Age Pottery from the Birimi Site,Northern Ghana

The mineralogy and bulk chemical compositions of 15 Kintampo (Late Stone Age) potsherds from the Birimi site on the Gambaga Escarpment and eight samples of local sediment were determined with the intent of characterizing these wares and identifying the material used in their manufacture. Sediment from clay pits still used by potters north of the escarpment contains iron‐rich laterite clasts (100 × XFeO_t = 100 × FeO_t/[FeO_t + Al₂O₃ + SiO₂] ≥10). Sedimentary clasts in stream sediments are relatively siliceous and iron‐poor (100 × XFeO_t < 10). Bulk geochemical data together with the compositions of lithic clasts (laterite, siltstone/sandstone) link the pottery to sediment sources, including escarpment sediments not presently used by Ghanaian potters. Fresh granite clasts found in some of the sherds were not found in the analyzed sediment samples, although some of their distinctive mineralogical constituents (e.g., variably barian alkali feldspar) are present. The analytical data suggest that pots found at Birimi were made locally by mixing escarpment sediment with clay and stream sediment brought in from below the escarpment. This contrasts with present‐day practice, whereby the pots themselves are imported. The place where Birimi pottery was made and the outcrop source of aluminous sediment (mudstone with an “escarpment” trace element signature) used in these wares, however, remain unidentified. © 2013 Wiley Periodicals, Inc.     

Soft‐sediment deformation structures in a Pleistocene glaciolacustrine delta and their implications for the recognition of subenvironments in delta deposits

The development of soft‐sediment deformation structures in clastic sediments is now reasonably well‐understood but their development in various deltaic subenvironments is not. A sedimentological analysis of a Pleistocene (ca 13·1 to 15 ¹⁰Be ka) Gilbert‐type glaciolacustine delta with gravity‐induced slides and slumps in the Mosty‐Danowo tunnel valley (north‐western Poland) provides more insight, because the various soft‐sediment deformation structures in these deposits were considered in the context of their specific deltaic subenvironment. The sediments show three main groups of soft‐sediment deformation structures in layers between undeformed sediments. The first group consists of deformed cross‐bedding (inclined, overturned, recumbent, complex and sheath folds), large‐scale folds (recumbent and sheath folds) and pillows forming plastic deformations. The second group comprises pillar structures (isolated and stress), clastic dykes with sand volcanoes and clastic megadykes as examples of water‐escape structures. The third group consists of faults (normal and reverse) and extensional fissures (small fissures and neptunian dykes). Some of the deformations developed shortly after deposition of the deformed sediment, other structures developed later. This development must be ascribed to hydroplastic movement in a quasi‐solid state, and due to fluidization and liquefaction of the rapidly deposited, water‐saturated deltaic sediments. The various types of deformations were triggered by: (i) a high sedimentation rate; (ii) erosion (by wave action or meltwater currents); and (iii) ice‐sheet loading and seasonal changes in the ablation rate. Analysis of these triggers, in combination with the deformational mechanisms, have resulted – on the basis of the spatial distribution of the various types of soft‐sediment deformation structures in the delta under study – in a model for the development of soft‐sediment deformation structures in the topsets, foresets and bottomsets of deltas. This analysis not only increases the understanding of the deformation processes in both modern and ancient deltaic settings but also helps to distinguish between the various subenvironments in ancient deltaic deposits.     

Effect of loading duration on uncertainty in creep analysis of clay

Some studies suggest that creep parameters should be determined using a greater quantity of creep test data to provide more reliable prediction regarding the deformation of soft soils. This study aims to investigate the effect of loading duration on model updating. One‐dimensional consolidation data of intact Vanttila clay under different loading durations collected from the literature is used for demonstration. The Bayesian probabilistic method is used to identify all unknown parameters based on the consolidation data during the entire consolidation process, and their uncertainty can be quantified through the obtained posterior probability density functions. Additionally, the optimal models are also determined from among 9 model candidates. The analyses indicate that the optimal models can describe the creep behavior of intact soft soils under different loading durations, and the adopted method can evaluate the effect of loading duration on uncertainty in the creep analysis. The uncertainty of a specific model and its model parameters decreases as more creep data are involved in the updating process, and the updated models that use more creep data can better capture the deformation behavior of an intact sample. The proposed method can provide quantified uncertainty in the process of model updating and assist engineers to decide whether the creep test data are sufficient for the creep analysis.     

Direct luminescence chronology of the Epipaleolithic Kebaran site of Nahal Hadera V,Israel

We report direct luminescence ages for the culture‐bearing sediments of the Kebaran site of Nahal Hadera V (NHV) in the coastal plain of Israel. Although the site contains, in addition to rich lithic deposits, plentiful mammalian bone, it has proved to be undatable using radiocarbon dating, in spite of the fact that the cultural context places the time of occupation well within the range of radiocarbon dating. In contrast, luminescence dating of the site sediments proved successful. Luminescence ages were determined using the single aliquot additive‐dose (SAA) method, applied to sand‐sized quartz extracts to determine past equivalent doses (D_e). Dose rates (R) were calculated using thick source alpha counting for the uranium (U) and thorium (Th) concentrations and x‐ray fluorescence analysis for the potassium (K₂0) concentration. Of the five samples collected at the site, four represent cultural and subcultural deposits and the fifth represents the geological substrate for the archaeological deposit, a quartz‐rich, carbonate‐cemented dune sand known as aeolianite or kurkar. The luminescence age of the kurkar is 42.7 ± 6.3 ka. Human occupation of the site occurred between 21.3 ka and 14.0 ka ago, during the Last Glacial Maximum. © 2003 Wiley Periodicals, Inc.     

Primitive Ordovician (Floian) echinoderms from Sandu,Guizhou Province,South China,and their significance

Pelmatozoans diversified primarily during the Middle and Late Ordovician Period, with Early Ordovician records being much more limited, resulting in many gaps in our knowledge of the early stages of their diversification. Dissociated pelmatozoan ossicles have been found abundantly in one section in the Tonggao Formation (Tetragraptus approximatus Biozone, Floian, Early Ordovician). Most of the ossicles are thecal plates and stem ossicles from hemicosmitoid and glyptocystitoid cystoids. Thecal plates of ‘Cheirocrinus’ sp., Polycosmites sp., and other plates of uncertain affinity are described. A different ossicle type, Pentagonopentagonalis (col.), may represent crinoid remains; this would be one of the earliest occurrences of the class. The thecal ossicles and columnals are all considered, as both sets of data are desirable to determine the most complete estimate of generic diversity. The echinoderm ossicles may have been transported in from shallower water palaeoenvironments and clusters of ossicles may represent coprolites or regurgitates. Estimates of Early Ordovician palaeogeography that place this site at 30°S or near the palaeoequator are supported by the physiological requirements of the primitive echinoderms described herein. Copyright © 2014 John Wiley & Sons, Ltd.     

Implementation of the European Water Framework Directive: Natural variability associated with the CARLIT method on the rocky shores of the Ligurian Sea (Italy)

The Water Framework Directive (WFD) 2000/60/EC, adopted by the European Community in 2000 with the goal of maintaining and improving the aquatic environments, requires that member states achieve and maintain a good ecological status of all water bodies by 2015. In the marine context, the ecological status has to be quantified applying indexes based on appropriate key biological elements, which allow the categorization of water bodies into five Ecological Status (ES) classes. The CARLIT index is a cartographic monitoring tool enabling the Ecological Quality Ratio (EQR) to be calculated using macroalgae in coastal hard bottoms as a key biological element; at present it is being applied in Spain, France and Italy. To detect actual changes of water quality and, consequently, rely on the application of indexes for the assessment of the ecological status in the marine environment, it is necessary to evaluate their sensitivity to natural variability at different temporal and spatial scales. In this study we present a first quantification of natural (spatial and temporal) variability of EQR‐CARLIT quality assessment in 2006 and 2007 along the Ligurian coast (North‐Western Mediterranean, Italy). The EQR‐CARLIT values recorded along the Ligurian coastline show that natural variability of EQR‐CARLIT is low and that it does not affect the attribution of a given stretch of coast to a particular ES class, in agreement with the major human pressures acting in the area (urbanization, river load, sea‐farming). A small‐scale variability was detected, strengthening the use of cartography of the whole rocky shore, whenever possible, or, alternatively, the assessment of the ecological status for long stretches of coast, to encompass the small‐scale variability due to local factors.