1999年台湾集集地震震源破裂过程

使用GPS同震位移资料和远场P波记录,研究了1999年台湾集集地震震源破裂过程．根据地质构造和余震分布引入了一个由弯曲断层面构造的三段“铲状”断层模型．在使用静态GPS位移资料反演集集地震的断层破裂滑动分布时,由于集集地震断层北部近地表破裂的复杂性,在位错模型中考虑拉张分量对地表同震位移的贡献,可更好地同时拟合GPS观测资料的水平和垂向分量．而纯剪切位错弹性半空间模型和分层地壳模型都无法同时拟合水平和垂向GPS观测资料．在此基础上,同时使用静力学同震位移资料和远场地震波形记录,反演集集地震的震源破裂过程．结果表明,一种垂直于断层面的“挤压性”(负)拉张分量几乎集中分布于地震断层的浅部和北部转折处,而这一带地表破裂远较没有(负)拉张分量出现的南部断层复杂．“冒起构造”的数字模拟表明,这种在集集地震破裂转折处及北部断裂带广为出现的典型破裂造成的地表位移可以用具有负拉张分量(挤压)的逆冲断层更好地模拟．而这种负拉张分量(挤压)的分布正是地震破裂性质和几何复杂性的综合反映,震源破裂过程也显示北部转折处破裂在空间和时间上的复杂性.高滑区域与余震分布表现为负相关.     

Spatial distribution of crustaceans associated with shallow soft‐bottom habitats in a coral reef lagoon

The ecology and diversity of the shallow soft‐bottom areas adjacent to coral reefs are still poorly known. To date, the few studies conducted in these habitats dealing with macroinvertebrate fauna have focused on their abundance spatial patterns at high taxonomic levels. Thus, some aspects important to evaluate the importance and vulnerability of these habitats, such as species diversity or the degree of habitat specialization, have often been overlooked. In this study we compared the crustacean assemblages present in four different habitats at Magoodhoo Island coral reef lagoon (Maldives): coral rubble, sandy areas and two different seagrass species (Thalassia hemprichii and Cymodocea sp.). Forty‐two different crustacean species belonging to 30 families and four orders were found. ‘Site’ was a significant factor in all of the statistical analyses, indicating that tropical soft‐bottom habitats can be highly heterogeneous, even at a spatial scale between tens and hundreds of meters. Although traditionally it has been considered that seagrass beds host greater species diversity and abundance of organisms than adjacent unvegetated habitats, no differences in the univariate measures of fauna (abundance of organisms, number of species and Shannon diversity) were observed among habitats. However, sandy areas, coral rubble and seagrass beds exhibited different species composition of crustacean communities. The percentage of taxa considered as potential habitat specialists was 27% and the number of species exclusively occurring in one habitat was especially high in seagrass beds. Thus, degradation of this vegetated habitat would result in a great loss of biodiversity in tropical shallow soft‐bottom habitats.     

Consequences of winter upwelling events on biogeochemical and phytoplankton patterns in a western Galician ria (NW Iberian peninsula)

The consequences of two upwelling events in mid- (MW) and late (LW) winter on biogeochemical and phytoplankton patterns were studied in the Pontevedra Ria and compared with the patterns measured under typical winter conditions and under a summer upwelling event. Thermohaline patterns measured during the mid-winter upwelling event (MW-up) revealed the intrusion of saltier seawater (35.9) into the ria associated with the Iberian Poleward Current (IPC). During the late-winter upwelling event (LW-up), the seawater which had welled up into the ria showed characteristics of the Eastern North Atlantic Central Water mass (ENACW). In both cases the measured water residence time (4 days during MW-up and 10 days during LW-up) was related to both meteorological and fluvial forcing. This residence time contrasts with that of summer upwelling (7 days) and with that estimated under unfavorable upwelling atmospheric conditions (2–4 weeks). During MW-up, the ria became poor in nutrients due to continental freshwater dilution, associated with the shorter residence time of the water, and the intrusion of IPC, which is a water body poor in nutrient salts: 2.9 μM of nitrate, 0.1 μM of phosphate and 1.5 μM of silicate. During this event, the ria exported 3.4 mol_DIN s⁻¹, compared with 6.9 mol_DIN s⁻¹ in non-upwelling conditions. Phytoplankton showed a uniform distribution throughout the ria, as during unfavorable upwelling conditions, and was characterized by the dominance of diatoms, mainly Nitzschia longissima and Skeletonema costatum. During LW-up, a nutrient depletion in the photic layer also occurred, but as a result of a phytoplankton spring bloom developing at this time. The ria was a nutrient trap where 4.1 mol_DIN s⁻¹ were processed by photosynthesis. This budget is three times higher than the one under non-upwelling conditions. In contrast with the MW-up, which had no effect on primary production, during LW-up the ria became more productive, although not as productive as during a summer upwelling event (9.9 mol_DIN s⁻¹). The taxonomic composition of the phytoplankton community did not change noticeably during LW-up and the summer upwelling, with the same species present and changing only in relative proportions. Diatoms were always the dominant microphytoplankton community, with Pseudonitzschia pungens, Thalassionema nitzschioides and several species of Chaetoceros as characteristic taxons.     

MSC certification in Argentina: Stakeholders’ perceptions and lessons learned

Marine Stewardship Council (MSC) certification is a market-based incentive program recognizing well-managed fisheries. Currently, four Argentine fisheries are involved in the MSC program. Using in-depth, semi-structured interviews with fishery stakeholders, the study surveys their perceptions regarding MSC certification. MSC certification is positively perceived because stakeholders focus on knowledge of the process. Most respondents consider certification as encouraging effective fishery stakeholders’ participation: access to information, increased communication, and reaching consensus. Market/political/social realities will prove whether a more intense participation of Argentine fisheries in the certification initiative is useful. Because some markets in the EU and USA are demanding MSC certified products, there is a need to work towards a governance structure that helps link certification with policy market outcomes to ensure exportation of Argentine fish. MSC certification may suggest improved management of participatory bottom-up planning. This bottom-up approach provides an opportunity to establish feedback mechanisms and organizational changes.     

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.     

Mode trapping in sdO models

Mode trapping of high-radial order gravity modes was found for a particular sdO model. The trapping is caused by the change in composition from the helium radiative shell to the hydrogen burning shell. A non-adiabatic effect of this trapping is the higher tendency to instability of the trapped modes. Low- to intermediate-radial order pressure modes (in sdO models they correspond to mixed modes with most nodes in the P-mode region) are found to be trapped by the chemical transition from the carbon-oxygen core to the He burning shell. As the trapping is produced in the deep interior of the star, where energy interchange is negligible at the p-mode frequencies, it has no particular effect on the driving.     

Numerical properties of low-frequency expansions for the reflection and transmission coefficients from transition layers

Summary The numerical properties of the low-frequency expansions for the reflection and transmission coefficients of SH-waves from transition layers, derived in [1], are studied. It is shown that the expansions are suitable for computations only when the thickness d of the transition layer is small in comparison with the wavelength of the incident wave (d0.5). For thicker transition layers, certain modifications of the method are suggested.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Soil contamination from urban and industrial activity: example of the mining district of Linares (southern Spain)

The Linares region (southern Spain) has been subjected to two important sources of pollution: the intensive mining works and the urban-industrial activity. To obtain a geochemical characterisation of the soil, 31 trace elements were analysed and 669 soil samples were collected. By means of clustering analysis, we identified groups of elements and grid squares in which relations could be established concerning soil lithology, urban and industrial activities and the degree of pollution impact; in addition, we were able to characterise the geochemical background of the study area. The multivariate study led us to identify four factors. Particularly important was factor 2, which represented the elements associated with mineral paragenesis (Cu, Pb, As, Co, Mn, Zn, Sn, Ba). This factor also contains elements related with an urban-industrial activity, such as Pb, Cu, Zn, As and Ba. Furthermore, we identified factor 4, associating Ni, V and Cr, and which is related to the use of fuels.     

Study of a rockfall in a limy conglomerate canyon (Covarrubias, Burgos, N. Spain)

In this paper, a rockfall of some tenths of cubic metres of rock, occurred in a conglomerate canyon in the northern Castilian plateau (N-Central Spain), is described in detail. This includes the basic data (geology, mapping, meteorological data and rock involved), the mechanical mechanism of the instability, the propagation and reach of the fallen rock boulders and the final location of the pieces. The study is based on detailed geological, aerial photography and geotechnical studies and advance topographical measurements. Geological engineering techniques are used to analyze the instability initiation and rockfall propagation. This study contributes to a better understanding of the geological processes leading to the occurrence of calcareous canyons and cliffs in the drainage network of the upper Castilian plateau. It is also helpful to improve our knowledge on natural rockfall phenomena for risk engineering purposes aiming to quantify, control and mitigate associated hazards.